Where is the PT204 engine produced?

2 Answers
ColeRose
07/29/25 12:25am
The PT204 engine used in the Chery Jaguar Land Rover Discovery Sport 2022 model is domestically produced, independently developed and manufactured by Jaguar Land Rover. The Chery Jaguar Land Rover Discovery Sport 2022 model 200PS Family Edition 5-seater is equipped with the PT204 engine, which delivers a maximum horsepower of 200, a maximum power of 147KW, a maximum power speed range of 1200-4000rpm, and a peak torque of 320N.m. For the daily maintenance of the PT204 engine in the Chery Jaguar Land Rover Discovery Sport 2022 model 200PS Family Edition 5-seater, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level; When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication parts, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
Was this review help?
5
2
Share
JayceFitz
08/12/25 4:39am
I'm a car enthusiast who particularly enjoys studying the ins and outs of engines. As far as I know, the PT204 engine is produced by Malaysia's Proton company, primarily manufactured at their Shah Alam factory. This engine is commonly found in Proton models such as the Proton Saga and Proton Persona, and it's especially popular in Southeast Asia, known for being economical and reliable. I recall that after Proton was acquired by China's Geely Group in 2017, their production processes were upgraded, but the core assembly still takes place locally in Malaysia. The engine is renowned for its durability, with an average fuel consumption of around 6 liters. If you're curious about similar models, the PT200 series is their mainstay, with the PT204 being its iteration, designed with a focus on low emissions and everyday driving friendliness. I've seen many owners sharing their experiences on forums, with most feedback highlighting smooth starts and low maintenance costs.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Is a 1.5L Engine Powerful Enough for a Car?

If it's for urban driving, a car with a 1.5L engine displacement is sufficient. Most family sedans today have engine displacements ranging from 1.4L to 1.8L, and even turbocharged models mostly fall between 1.4T and 1.5T. Moreover, most 1.5L engines can deliver over 110 horsepower, which is more than adequate for city driving in most family cars. Here are some methods to determine if a car's power is sufficient: Check the engine RPM: Generally, an engine RPM between 2500 and 3000 is considered optimal. At the same speed of 120 mph, you may notice that more expensive cars tend to have lower engine RPMs. Engine material: Aluminum has a lower density, making engines constructed from it naturally lighter. Cars equipped with aluminum engines have reduced weight, significantly enhancing power efficiency. Aluminum is highly resistant to high temperatures and corrosion, offering better ventilation and heat dissipation. Its inherent physical properties provide excellent ductility, making it more malleable than cast iron and allowing for more precise and refined manufacturing processes.
2
3
Share

What are the criteria for tire replacement?

Tire replacement criteria are as follows: 1. Technical standard: When tread grooves are less than 1.6MM, tires should be replaced. If the tread wear indicator is exposed, it indicates that the groove depth is less than 1.6mm. The tread wear indicator is the raised part in the groove. Using tires with remaining groove depth below 1.6mm may result in sudden loss of traction and braking force in rainy conditions, as well as complete loss of traction in snowy conditions. 2. Tread standard: Tires that have been punctured more than 4 times on the tread; tires with punctured or damaged sidewalls; tires with tread punctures exceeding 4mm in diameter; tires with punctured shoulders. The sidewall rubber is thinner, and if the puncture hole is large or the rubber surface shows extensive rough granulation or bulging deformation, immediate replacement is necessary to prevent blowouts. 3. Mileage standard: Based on road conditions, 30,000-50,000 kilometers. For smooth asphalt roads, 50,000 kilometers; for rough gravel roads, 30,000 kilometers. When exceeding 30,000 kilometers, the tread friction coefficient is less than 50. In wet or snowy conditions, the tread's water drainage function decreases or is lost, with a friction coefficient below 15, making gravel roads prone to blowouts.
12
1
Share

Can You Directly Add Water to Windshield Washer Fluid?

You cannot directly add water to windshield washer fluid. It is not recommended to use plain tap water as a substitute for washer fluid, because regular tap water contains numerous impurities. Prolonged use will cause these impurities to accumulate in the rubber tubing, affecting normal spray function. Additionally, plain water can only superficially clean dust and lacks the capability to thoroughly remove stubborn dirt or insect residue from windshields. Relevant information about automotive windshield washer fluid is as follows: 1. Washer fluid is primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Due to common manufacturing processes and materials, some inferior products may appear on the market. When purchasing, shake the bottle vigorously—the more foam it produces, the higher the surfactant content. Finer foam indicates more environmentally friendly anionic surfactants. 2. Generally, windshield washer fluids on the market fall into three categories: The first is summer-use fluid, which incorporates insect-removing agents to quickly eliminate insect residue on windshields. The second is winter-use antifreeze fluid, ensuring no freezing or damage to vehicle components even at temperatures below -20°C. The third is special antifreeze fluid, which remains unfrozen at -40°C, making it suitable for extremely cold regions in northern China.
18
5
Share

Can you turn right from the diversion line?

When turning right, you are not allowed to drive over the diversion line, nor should you cross any solid lines. At some intersections, you need to obey the traffic light when turning right. Below is the relevant information: Function of diversion lines: As the name suggests, diversion lines are used to guide traffic flow. They are mainly applied at wide, irregular, or complex intersections, highway ramps, or other special locations. These lines serve to alert drivers to pay attention to safety, enhance vigilance, and play a role in regulating, guiding, and warning traffic, thereby reducing the occurrence of accidents. Driving over diversion lines may be photographed: Generally, there are two methods: automatic capture by electronic police and manual capture. Electronic police are distributed at various intersections, and when a vehicle drives over the diversion line, it will be captured. The electronic cameras transmit the data to the backend for processing, and traffic police will further confirm the violation and issue a penalty notice to the driver. The other method involves manual capture by traffic police, which is more flexible, allowing for on-the-spot enforcement.
20
0
Share

What is the gear explanation for a manual transmission?

Manual transmission cars have gears divided into 1st gear, 2nd gear, 3rd gear, 4th gear, 5th gear, and R gear, where 1st to 5th gears are forward gears, and R gear is the reverse gear. Here is the relevant information: 1. 1st gear is the starting gear. The car should start in 1st gear when idling. The speed range for 1st gear is 0km to 15km. It is also used for uphill and downhill driving, relying on the engine's traction to control speed. 2nd gear is engaged after starting in 1st gear, with a speed range of 10km to 25km. 2. 3rd gear is engaged after slightly accelerating in 2nd gear. Only when 3rd gear is engaged does the vehicle begin driving at normal speed, with a range of 20km to 45km. 4th gear is the highest gear for most urban road driving, with a speed range of 40km to 60km. 5th gear is engaged when the speed reaches the required level to maintain high-speed driving, with a range of 60km or above. R gear is the reverse gear, engaged when reversing the vehicle.
2
0
Share

Will speeding on the highway be captured by cameras?

Speeding on the highway will be captured by cameras. On highways, any speed exceeding the posted limit will be recorded. Highway speed limit standards: Pedestrians, non-motorized vehicles, tractors, wheeled special machinery vehicles, articulated buses, full-trailer trucks, and other motor vehicles with a design speed below 70 km/h are not allowed to enter the highway. The maximum speed on highways must not exceed 120 km/h, and the minimum speed must not be lower than 60 km/h. Highway speeding penalty standards: Exceeding the speed limit by less than 50% results in a 3-point deduction, exceeding the speed limit by more than 50% results in a 6-point deduction, and exceeding the speed limit by 50% or more on highways results in a 6-point deduction, which may lead to the revocation of the driver's license. Principles of speeding detection and photography: Speeding cameras and surveillance cameras use two different types of cameras. Speeding cameras use high-speed, high-sensitivity cameras with flash and sensor devices. Induction coils (sensors) are installed on the camera equipment, which automatically trigger the flash when a vehicle is detected. Surveillance cameras use conventional cameras and are only used for observing traffic flow and road conditions. For surveillance cameras to prove speeding, at least three or more photos are required.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.