Where is the protruding part on the left wiper?

1 Answers
Johnny
07/30/25 1:00am
The protruding part on the left wiper is located at the connection point between the wiper blade and the metal swing arm of the wiper. The method for using the car wiper is as follows: 1. Locate the wiper control lever on the lower left side of the steering wheel; 2. Push the wiper lever up one gear to start the wiper operation; 3. To turn off the wiper, push the lever down to the 'off' position. The function of the wiper is to remove raindrops, debris, and dust attached to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety. The method for replacing the wiper is as follows: 1. Lift the wiper up and press the clip below to remove the wiper rubber; 2. Remove the wiper and lift the front end of the middle clip; 3. Insert the wiper into the middle clip and pull it tight by hand. Once you hear a click sound, the replacement is complete.
Was this review help?
3
1
Share
More Forum Discussions

How many liters of engine oil does the Nissan Sylphy Classic require?

The Nissan Sylphy Classic requires 3 liters of engine oil. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent contamination from external pollutants; 3. To protect components from contact with water, air, and harmful acidic gases; 4. To cushion the pressure rise in the engine cylinder ports; 5. To flush away dirt generated on the working surfaces of components. The method to check the engine oil level is: 1. Park the vehicle on a level surface; 2. After parking for 10 minutes, pull out the dipstick; 3. Hold the dipstick perpendicular to the ground to check the oil level. The body dimensions of the Nissan Sylphy Classic are: length 4631mm, width 1760mm, height 1503mm, with a wheelbase of 2700mm, a minimum ground clearance of 166mm, a curb weight of 1188kg, and a trunk capacity of 50 liters.
5
1
Share

Where is Toyota produced?

FAW Toyota has three major production bases located in Tianjin, Changchun in Jilin Province, and Chengdu in Sichuan Province, China. More information about Toyota is as follows: 1. FAW Toyota Motor Co., Ltd. was established in June 2000, covering an area of 1.61 million square meters, with a current production capacity of 420,000 vehicles per year, and is registered in Tianjin Economic-Technological Development Area. 2. Tianjin FAW Toyota Motor Co., Ltd. was formerly known as Tianjin Toyota Motor Co., Ltd., established in June 2000. 3. The Vios is one of FAW Toyota's main models, designed and developed specifically by Toyota for the Asian market as an entry-level family car. Based on the NBC platform, after extending the wheelbase, the Vios developed on the small car platform almost reaches the level of a compact sedan.
16
4
Share

What is the wheel size of the GS4?

The GS4 comes with two tire sizes: 215/60R17 and 215/55R18. The original tire specifications and parameter data label for the GAC Trumpchi GS4 are affixed below the driver's side B-pillar. Tires are one of the most important components of a vehicle, supporting its entire weight, bearing the load, and transmitting forces and moments in other directions. More information about the car tires is as follows: 1. The GS4 uses Michelin PRIMACY 3ST tires, which demonstrate excellent dry and wet grip performance. Paired with multi-spoke two-tone wheels, they offer a good texture. The PRIMACY 3ST has always been representative of Michelin's quiet and comfortable tire lineup. 2. The outstanding handling performance of the Primacy 3ST Hao Yue comes from its adoption of Michelin's "FLEXMAX" technology, which combines highly flexible tread rubber with a tread block chamfer design.
16
1
Share

What Causes a Car to Shake During Acceleration?

The reasons for a car shaking during acceleration are: 1. Issues with the ignition system, causing uneven ignition leading to shaking; 2. Problems with the fuel supply system, such as abnormal fuel pump pressure causing shaking; 3. Contaminants in the fuel intake system causing shaking; 4. Tire malfunctions causing shaking, etc. When there is excessive carbon buildup inside the engine, the gasoline sprayed by the cold start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits will be drawn into the combustion chamber by the engine's vacuum suction, enriching the air-fuel mixture again. This fluctuation between lean and rich air-fuel mixtures causes the engine to idle roughly after a cold start.
7
2
Share

How to Adjust the Lights on an Audi A6?

Audi A6 light adjustment methods are as follows: 1. Locate the switch on the left side of the driver's compartment, which can be set to automatic mode. 2. With the low beam headlights on, push the light control lever on the left side of the steering wheel downward to activate the high beam headlights. More information about the Audi A6 is as follows: 1. The Audi A6 2010 model boasts the most advanced and extensive engine lineup among high-end executive sedans. Among them, the 2.8FSI and 3.0TFSI high-efficiency gasoline engines are considered rising stars in Audi's global engine strategy. 2. The 3.0TFSI engine is the latest top version of Audi's V6 engine, combining gasoline direct injection and mechanical supercharging to deliver power exceeding that of an 8-cylinder engine while maintaining extremely high fuel efficiency.
3
1
Share

How to Obtain a Motor Vehicle Driver's Physical Examination Form?

Methods for obtaining a motor vehicle driver's physical examination form: Generally, the vehicle management office can conduct physical condition tests. If the vehicle management office does not provide physical examinations, you should go to a medical institution at or above the county level for a physical examination and request them to issue a certificate confirming suitable physical conditions for driving. Below is an introduction to the driver's license physical examination: 1. Physical examination requirements: For a C1 driver's license, the physical examination requires a height of at least 150 cm, visual acuity of at least 4.9 in both eyes, no red-green color blindness, the ability to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork, three healthy fingers on each hand with normal motor function, normal motor function in the right lower limb, and normal movement of the torso and neck. 2. Materials to prepare: For the driver's license physical examination, you need to prepare your ID card and a recent one-inch color photo with a white background. Some driving schools/vehicle management offices may require students to take photos on-site.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.