Where is the production site of Changan Eado?

2 Answers
OJude
07/28/25 11:59pm
The production site of Changan Eado is located at Konggang Avenue, Yubei District, Chongqing. The Changan Eado is a compact 4-door, 5-seater sedan with the following dimensions: length 4730mm, width 1820mm, height 1505mm, and a wheelbase of 2700mm. It has a fuel tank capacity of 53 liters. The Changan Eado is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 116 kW at 5500 rpm and a maximum torque of 260 Nm between 1500 to 4000 rpm. The vehicle features front-wheel drive, with a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
Was this review help?
8
4
Share
StElizabeth
08/12/25 4:16am
The Changan Eado is produced in Chongqing, with the factory located in the Liangjiang New Area of the city. As a car enthusiast, I've done quite a bit of research and found that Changan Automobile's headquarters is also based in Chongqing, so the Eado primarily rolls off the production line at this facility. Chongqing, with its mountainous terrain and vast land, offers ample space for factory construction, and its logistics are quite convenient. The proximity to the Yangtze River ports makes material transportation much more efficient. The factory itself is quite large, and I've heard it utilizes a lot of automated equipment, with skilled workers ensuring stable vehicle quality. When I passed through Chongqing a couple of years ago, I even considered touring the factory, but time didn't permit. Next time, I'll definitely make time to see the production line—it sounds pretty cool. Choosing this location is mainly about cost control, as housing and labor costs are relatively affordable compared to coastal areas. But for the average consumer, reliable vehicle quality is what matters most, so as long as the location is well-chosen, it's all good.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What are the body dimensions of the Porsche Cayenne?

The body dimensions of the Porsche Cayenne are 4918mm in length, 1983mm in width, and 1696mm in height, with a wheelbase of 2895mm. Below is more information about the Porsche Cayenne: 1. In terms of exterior design, the Cayenne's headlights and radiator grille maintain Porsche's traditional style. The vehicle width is 1940mm, but the height is only 1690mm. The ground clearance is 273mm, with a maximum approach angle of 32 degrees. The long-travel suspension springs enhance off-road performance, and the air suspension offers a 116mm adjustment range with six height settings, catering to both off-road and sports car needs—a unique feature of Porsche SUVs. 2. The interior largely follows Porsche's classic design elements, such as the ignition switch on the left side of the steering column, the three-spoke steering wheel, and extensive leather trim. The key difference lies in the five-gauge instrument cluster, where the central dial displays driving-related information instead of a tachometer found in sports car models. Additionally, the adjustable chassis and suspension controls on the center console are exclusive to the Porsche Cayenne. 3. In terms of performance, the diesel version delivers a maximum power output of 240 horsepower and a peak torque of 406 lb-ft, accelerating from 0 to 60 mph in 7.2 seconds. The vehicle offers enhanced stability, reduced vibrations, and smoother driving dynamics. Although it lacks an automatic start/stop function, the Cayenne diesel variant includes a system to prevent incorrect fuel usage.
4
3
Share

At What RPM Should You Shift Gears?

Shifting gears is generally recommended between 1500-2500 rpm. For fuel efficiency, shifting around 1500-1800 rpm is advisable, with lower gears potentially increased to around 2000 rpm. During the break-in period, it's best to lower the shifting rpm. If you're looking for better performance, shifting around 2000-2500 rpm is more suitable. Additional Information: 1. The relationship between vehicle speed and rpm isn't one-to-one and largely depends on the gear ratio of the transmission. For instance, in a speed vs. rpm gear comparison chart, when the engine is at 2000 rpm, the speed difference between 4th and 5th gears can be significant. Most vehicles typically shift appropriately between 2000-3000 rpm, but shifting from 1st to 2nd gear is often lower, around 2000 rpm or slightly above. 2. Some engines are low-rpm engines, capable of delivering significant torque and power at lower rpms. For such engines, shifting around 2000 rpm or even between 1500-1800 rpm is possible. Generally, non-turbocharged engines don't reach 80% of their torque output until above 2500 rpm, so maintaining power requires shifting between 2500-3000 rpm, though this consumes more fuel.
16
2
Share

What does VSC mean in a vehicle?

The VSC in a car stands for Vehicle Stability Control, which is an active safety system developed by Toyota Motor Corporation. Below is related information: 1. Systems with similar functions include BMW's DSC Dynamic Stability Control and Bosch's ESP Electronic Stability Program, which operate on nearly identical mechanisms but use different names for patent registration purposes. 2. VSC is the abbreviation for Voltage Source Converter, referring to a converter composed of devices with turn-off capabilities (such as Insulated Gate Bipolar Transistors (IGBT)). With the continuous cost reduction and technological maturity of fully-controlled power electronic devices (like GTO-IGBT), Voltage Source Converters (VSC) have found increasingly widespread applications in motor variable frequency speed regulation, flexible AC transmission, and high-voltage DC transmission. 3. There are mainly two types of VSC topologies: one is the traditional three-phase full-bridge converter, and the other is the multi-level converter. The latter can increase output voltage and reduce harmonic content by increasing the number of levels at lower switching frequencies, meeting the capacity requirements for power system applications, and represents the future development direction.
20
3
Share

What Causes Black Smoke from Diesel Engines?

Here are the specific reasons for black smoke from diesel engines: 1. Poor diesel quality. The performance indicators of the diesel used do not meet the standard requirements, resulting in poor fuel combustion and black smoke. 2. Blocked air intake. Insufficient air supply during diesel combustion leads to incomplete combustion, causing the diesel engine to emit black smoke. 3. Insufficient compression force. The required pressure does not meet the combustion requirements, worsening the combustion conditions and resulting in black smoke from the diesel engine. 4. Changes in the combustion environment. Long-term use of the diesel engine and other factors can alter the shape and volume of the combustion chamber, further degrading the quality of the fuel-air mixture. Poor mixing leads to suboptimal combustion conditions and the production of black smoke.
5
4
Share

Where to Obtain the New Vehicle Registration Certificate?

The vehicle registration certificate is obtained at the local vehicle management office. Below are the relevant details: 1. The vehicle registration certificate serves as the legal proof of vehicle ownership and is kept by the owner, similar to a property deed. Materials required for applying for a vehicle registration certificate. 2. Original and photocopy of the vehicle owner's identity proof. 3. It is important to note that for processing the vehicle registration form, the vehicle must be brought to the local vehicle management office, and the application must be made by the vehicle owner personally; it cannot be delegated to others. 4. If the vehicle registration certificate needs to be reissued, the owner must provide the relevant documents, undergo vehicle inspection at the local vehicle management office, wait for verification of the vehicle information after inspection, then proceed to the service hall for processing. A certain fee is charged for the process, after which the vehicle registration certificate can be collected.
2
2
Share

Should I Report the Loss of My Car Key?

Reporting the loss of a car key is not necessary. Here are specific solutions for a lost car key: 1. Contact the manufacturer's after-sales service if the car key is lost. As long as you confirm that you are the car owner or have the owner's authorization, the manufacturer will arrange for the nearest 4S store to provide paid rescue services. 2. The 4S store will tow the car back to the shop and, after verifying your identity again, will configure a new key. 3. Once the new key is successfully matched, the previously lost smart remote key will become invalid. 4. If the car key is stolen, it is recommended to replace all the locks in the car because the old key's invalidity only means it cannot start the vehicle. Since the car door uses a mechanical lock, the old key can still open the car door.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.