Where is the production location of XPeng Motors?

1 Answers
Pauline
07/30/25 5:59am
XPeng Motors' production location is in Zhengzhou. Taking the XPeng P7 as an example, it is a pure electric mid-size sedan under XPeng Motors, with body dimensions of 4880mm in length, 1896mm in width, and 1450mm in height, a wheelbase of 2998mm, and a trunk capacity of 440 liters. The front suspension of XPeng Motors is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a permanent magnet synchronous motor, with a maximum power of 120kW and a maximum torque of 390Nm. The drive motor is a dual-motor system, with a front and rear drive configuration, and the battery type is a ternary lithium battery.
Was this review help?
4
4
Share
More Forum Discussions

What does the B2 subject 5 test cover?

B2 subject 5 examination content includes: road traffic safety laws and regulations, civilized and safe driving knowledge, emergency response, and other related knowledge tests. Additionally, candidates must undergo no less than half an hour of traffic accident case warning education. Below is a partial introduction about the B2 driver's license: 1. B2 license vehicle types: heavy-duty, medium-duty trucks or large, heavy-duty, and medium-duty special-purpose operation vehicles. Heavy-duty and medium-duty trucks are mainly trucks. Large, heavy-duty, and medium-duty special-purpose operation vehicles refer to vehicles equipped with special equipment or tools. 2. Eligible vehicle types for the license: C1 small cars, C2 small automatic transmission cars, C3 low-speed trucks, C4 three-wheeled cars, M wheeled self-propelled machinery vehicles. This is exactly the same as the B1 driver's license.
3
4
Share

What kind of car has tires that are 3.75 meters tall?

Tires that are 3.75 meters tall belong to the Northern Heavy-duty TR100. Here is more information about the tires: 1. Tires are one of the important components of a vehicle. In mining transportation, the cost of tire consumption accounts for a significant proportion of the total transportation cost, approximately 20% to 30%. 2. The fixed cost of tires also increases with the increase in the load tonnage of the truck. The price of mining vehicle tires is also relatively high, accounting for 7% to 10% of the total vehicle cost. The following are the functions of tires: 1. To bear the weight of the vehicle itself and its load, maintaining its operational performance. 2. To cushion the impact and vibration during vehicle movement, ensuring stability and smoothness. 3. To ensure reliable contact between the entire tire and the ground, improving the vehicle's traction, off-road capability, and braking performance.
5
1
Share

How to adjust the audio system in Audi A4L?

Audi A4L's audio settings can be adjusted through the MMI system by following the corner indicators to access sound effects, where you can fine-tune bass and treble. Below is relevant information about Audi's in-car music system: 1. The new Audi A4L is the first domestically produced model equipped with Bang & Olufsen audio system, delivering brilliant high notes, realistic detail clarity, precise sound reproduction, and a finely differentiated wide frequency spectrum that brings users an opera house-level premium experience. 2. The Bang & Olufsen audio system specially designed for Audi condenses years of technical expertise, meticulously considering multiple factors affecting sound quality such as the vehicle's interior structure, shape, materials, speed, corresponding wind speed, and friction between tires and road surface, creating a system that can adjust acoustic parameters based on driving speed.
16
0
Share

When to Add Refrigerant to the Air Conditioning?

There is no fixed cycle for adding refrigerant to a car's air conditioning system. The need for replenishment is primarily determined by the cooling performance of the air conditioning. If you notice poor cooling efficiency during use, an inspection should be conducted, as the issue is often caused by refrigerant leakage. The following are the functions of the air conditioning system: 1. Achieve cooling effects through the continuous transformation and circulation of refrigerant. 2. Draw in fresh outside air to ventilate and refresh the cabin air, preventing windshield fogging. 3. Utilize engine coolant, waste heat, or heat generated by a burner as a heat source. This heat is then transferred through the heater and blown into the cabin by the blower to raise the temperature and achieve heating effects. 4. Remove dust, odors, smoke, and toxic gases from the cabin air, keeping it fresh. It also humidifies the cabin air, increasing its relative humidity.
8
1
Share

Which is the High Pressure Pipe and Low Pressure Pipe in a Car's Air Conditioning System?

Here are the specific methods to identify the high pressure pipe and low pressure pipe in a car's air conditioning system: 1. Observe the thickness: The thicker one is the low pressure pipe, while the thinner one is the high pressure pipe. The pipe running from the evaporator to the compressor is the low pressure pipe, and the pipe from the compressor to the condenser, then to the receiver-drier and back to the evaporator is the high pressure pipe. 2. Check the letters: The low pressure pipe's service port cap is marked with an "L" (for Low), and the high pressure pipe's service port cap is marked with an "H" (for High). 3. Temperature difference: When the air conditioning is operating normally, the low pressure pipe feels cooler to the touch, while the high pressure pipe feels hotter. Be cautious when touching the pipes for safety reasons.
11
0
Share

Is a Wheel Alignment Necessary When Replacing Just One Tire?

Replacing just one tire on a car does not necessarily require a wheel alignment. The prerequisites for performing a wheel alignment are: 1. The vehicle's driving performance is affected. 2. Damage to the chassis and suspension due to an accident. 3. Abnormal tire wear, but it's also necessary to consider whether the abnormal wear is caused by incorrect tire pressure. 4. Parts of the axle and suspension have been removed. Steps for performing a wheel alignment: 1. Connect the power and turn on the machine. 2. Attach the target to the wheel, with the target facing the camera. 3. On the computer screen, click to enter the measurement program. 4. Open the camera to confirm if the targets are correctly positioned front and back; adjust them if they are not. 5. Click to measure and follow the prompts to obtain the measurement data. 6. Adjust the total toe data of the vehicle to the green standard range.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.