Where is the production location of JAC Motors?

What are the car logos with triangular shapes?

Car logos with triangular shapes include Jetta, Chery, Maybach, etc. Taking Chery as an example, its models include: Tiggo 8, Tiggo 5x, Tiggo 3xe, Ant, Tiggo e, etc. Using the Tiggo 8 as an example, it belongs to the midsize SUV category, with body dimensions of: length 4700mm, width 1860mm, height 1746mm, a wheelbase of 2710mm, and a trunk capacity ranging from 889 to 1930 liters. More details are as follows: 1. The Tiggo 8 is equipped with a 1.5T turbocharged engine, with a maximum power of 115kW and a maximum power speed of 5500 rpm. 2. Its maximum torque is 230Nm, with a maximum torque speed ranging from 1750 to 4000 rpm.

3

4

Share

Can You Park on the Highway Emergency Lane?

Highway emergency lanes can be used for parking, but only under specific circumstances: 1. Vehicle breakdown. 2. Traffic accidents. 3. Sudden illness of the driver. Emergency lanes refer to: 1. Temporary stopping areas on highways and first-class roads designated for vehicles experiencing sudden malfunctions or other emergencies. 2. Emergency lanes are strictly for emergency use only and should not be occupied without valid reasons. 3. When parking on a highway emergency lane, follow proper procedures: activate hazard lights, place a triangular warning sign 150 meters behind the vehicle in the direction of oncoming traffic, evacuate all passengers to the area outside the guardrail, and call for emergency assistance.

20

1

Share

What is the National Emission Standard for Cars in 2008?

Most cars from 2008 comply with the National IV emission standard. The simplest and most direct way to check a car's emission standard is to look at the environmental label on the vehicle, which clearly indicates the standard on the back. More details are as follows: 1. National IV is a vehicle emission standard, referring to the fourth stage of China's national standards for pollutant emissions from motor vehicles. The main pollutants emitted by cars include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). 2. Technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices can be applied to control and reduce vehicle emissions to below specified levels. Methods to check a car's emission standard are as follows: 1. The simplest and most direct method is to check the environmental label on the vehicle, which has a clear mark on the back. 2. Visit the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center for inquiries. 3. Bring the vehicle registration certificate (original or copy) to the vehicle management office for inquiries. 4. Check the vehicle's factory certificate, but since this is usually kept by the vehicle management office, it's advisable to make a copy when purchasing the car for future reference. 5. Make a rough estimate based on the year the car was registered. For example: 1. Most cars registered after 2008 are National IV. 2. Cars registered in 2007 could be either National III or National IV. 3. Cars registered before 2007 are mostly below National IV, i.e., National II or National III. 4. Cars registered before 2005 are mostly National II.

1

0

Share

What are the possible reasons for the unresponsive co-pilot window button?

The possible reasons for the unresponsive co-pilot window button are as follows: 1. The window lift motor is damaged or there is poor contact in the electrical control wiring harness. If there is a burnt smell when holding down the window button or abnormal noises inside the door panel, it is likely that the window lift motor components are damaged. It is recommended to directly visit a 4S shop or auto repair shop to replace the window lift motor. 2. Motor overheating protection: In this case, simply wait for the motor to cool down. 3. Blocked guide rails or aging rubber seals. At this point, the owner only needs to clean the guide rails and apply some lubricant.

7

3

Share

Can the previous ETC still be used if the license plate number remains unchanged after changing cars?

The ETC cannot be used if the vehicle information it is bound to is inconsistent. Different types of vehicles have different highway toll fees. According to the "Rules for the Use of Non-Stop Rapid Passage Systems," when applying for an ETC, the ETC card and OBU device are already bound to the vehicle, and the relevant vehicle information has been imported, forming a one-to-one correspondence. If you switch to a new car with a new license plate, you need to cancel the original ETC and reapply for the new car. If it's a new car with the old license plate, you can simply update the vehicle information at an offline service center. ETC is a non-stop electronic toll collection system. ETC lanes are set up for vehicles equipped with ETC onboard devices, using electronic tolling. The electronic toll collection system is an automatic toll system for highways or bridges. ETC Deduction Principles: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with banks, the system achieves the goal of vehicles not needing to stop at toll stations to pay road or bridge fees. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line. Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution. Reduced wear and tear: Saves costs by reducing the frequency of vehicle starts and brakes, lowering wear and fuel consumption. Users also enjoy a 5% discount on toll fees. Improved efficiency: Theoretically, ETC lanes can increase vehicle passage efficiency by 2-3 times, making traditional ETC faster, newer, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also set a clear target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC usage rate for passenger vehicles, efforts will be made to promote ETC use for trucks in the future. There will also be exploration of deep integration between the ETC system and smart transportation development directions such as vehicle-to-vehicle communication and vehicle-to-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC applications. ETC Usage Notes: The ETC transaction sensing range is 8 meters. When the vehicle in front stops, to prevent issues such as the front vehicle's ETC device malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatically paying the toll for the front vehicle. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle's device information cannot be read, leading to failed toll deductions. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. You can take it to the bank where the ETC card was issued or the highway service center for inspection. If the detachment or loosening is not due to human factors, reactivation is sufficient. When using a debit card bound to ETC, insufficient balance will also cause toll deduction failures. Follow the guidance of on-site staff to use the manual MTC lane and pass by paying cash or swiping a card. If the car's windshield is too thick, it may cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.

20

3

Share

What to Do When the New Santana Fuel Tank Cover Cannot Be Locked?

New Santana fuel tank cover cannot be locked. The solutions are as follows: 1. If the locking mechanism is damaged, it needs to be replaced. 2. If it is deformed, a new fuel tank cover needs to be replaced. If there is an issue with the fuel tank cover, it should be repaired promptly. The reasons why the car fuel tank cover cannot be locked are as follows: 1. Operational issue. For some models, the fuel tank cover is connected to the central locking system. After the vehicle is locked, the fuel tank cover will automatically lock. 2. The locking clip part of the fuel tank cover is damaged and needs to be inspected and replaced. 3. There is a foreign object stuck in the fuel tank cover, preventing it from closing properly.

8

0

Share

Where is the production location of JAC Motors?

What are the car logos with triangular shapes?

Can You Park on the Highway Emergency Lane?

What is the National Emission Standard for Cars in 2008?

What are the possible reasons for the unresponsive co-pilot window button?

Can the previous ETC still be used if the license plate number remains unchanged after changing cars?

What to Do When the New Santana Fuel Tank Cover Cannot Be Locked?

Analysis of the Causes and Countermeasures for Changes in Automotive Technical Conditions

What Causes Abnormal Noise When Braking at High Speed?

Which Ferrari model is known as the 'King of Horses'?

What is the weight of a motorcycle?