Where is the production location of Exeed cars?

2 Answers
RobertRose
07/29/25 5:12am
Exeed cars are produced in Wuhu, located in the eastern part of Anhui Province. Exeed is a mid-to-high-end sub-brand under Chery. Currently, Exeed has only one model on sale, named Exeed TX, which is positioned as a midsize SUV. The Exeed TX has dimensions of 4690mm in length, 1885mm in width, and 1706mm in height, with a wheelbase of 2715mm. In terms of power, this vehicle is equipped with a 1.6-liter turbocharged engine across all variants, delivering a maximum horsepower of 197 hp, a maximum power of 145 kW, and a maximum torque of 290 N·m. The engine is paired with a 7-speed dual-clutch transmission. For the suspension system, the Exeed TX utilizes a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
14
2
Share
StKaleb
08/12/25 8:49am
As a seasoned observer in the automotive industry, I've witnessed the birth and growth of Exeed over the years. Exeed's production base is primarily rooted in Wuhu, Anhui, which serves as the headquarters of Chery Group. Wuhu not only handles Exeed's complete vehicle manufacturing but also completes engine production and core technology R&D here. I remember visiting their stamping workshop last year - the fully automated robotic arm operations were truly impressive. Although Exeed has some production lines at its Qingdao base in China, the Wuhu factory accounts for over 80% of its production capacity. As a premium-positioned Chinese brand, Exeed consistently maintains its core manufacturing within China.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the Toyota Corolla 1.6?

Toyota Corolla 1.6 has a fuel consumption of 5.1 liters per 100 kilometers. The following are the factors affecting fuel consumption and methods to reduce it: Factors affecting fuel consumption: The engine displacement has a certain impact on the car's fuel consumption; the driver's driving habits, such as frequent aggressive driving, rapid acceleration, or sudden braking during driving, will affect the car's fuel consumption; when the tire pressure is too high or too low, the car's fuel consumption will increase; the road conditions the car is driving on will also affect fuel consumption. Methods to reduce fuel consumption: Start slowly; accelerate and brake gently and early; maintain proper tire pressure; regularly organize the trunk to reduce weight.
3
4
Share

Adjusting Headlights for Width or Narrowness?

Car headlights should concentrate the light beam as much as possible. If the light is too scattered, it will become blurry, affecting the illumination effect and potentially disturbing other vehicles. There are two adjustment screws at the back of the car headlights: one for adjusting the height and the other for adjusting the width. These can be adjusted by turning the knobs for left-right and height alignment. When adjusting the lights, avoid using a wall. Instead, drive the car onto a flat road and adjust the low beam's focal point to 30 meters, ensuring the two points overlap. Adjust the high beam to be parallel to the ground, ensuring the spots are aligned. Park the car 7.6 meters away from a vertical wall on level ground. Measure the height of the headlight centers and the distance between the two headlights. Place a horizontal masking tape on the wall 0.1 meters below the headlights, ensuring it is centered relative to the car. Adjust the vertical adjustment screw until the headlight beam is centered on the tape. Continue adjusting the vertical screw until the beam projects straight ahead. To ensure proper adjustment, measure the height of the beam on the wall and the headlight height to confirm they are equal.
2
1
Share

What does the blue logo Volvo mean?

Blue logo Volvo refers to hybrid models. Below is a related introduction to the advantages and disadvantages of hybrid electric vehicles: Advantages: High fuel economy performance and superior driving performance. Hybrid electric vehicles use fuel for their engines, and with the assistance of electric motors during startup and acceleration, fuel consumption can be reduced. The internal combustion engine can be shut off, allowing the battery to drive alone, achieving "zero" emissions. Not fuel-efficient during prolonged high-speed or constant-speed driving. The fuel consumption advantage of hybrid vehicles mainly relies on potential energy accumulation for electric energy saving. Hybrid vehicles are more energy-efficient when frequently braking, decelerating, or starting and stopping. However, if driving at a constant speed for a long time, the energy-saving effect will be correspondingly reduced.
9
0
Share

How Far Over the Stop Line Constitutes Running a Red Light?

If a vehicle crosses the stop line during a red light but stops immediately, it will not be considered as running a red light. When the entire vehicle crosses the stop line, meaning both the front and rear wheels have passed the stop line but have not crossed the opposite stop line, it is referred to as over-line stopping. According to Article 4, Item 5 of the "Scoring Standards for Road Traffic Safety Violations": Failing to drive or stop as required at an intersection results in a 2-point penalty. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle proceeds through an intersection during a red light, it constitutes the traffic violation of running a red light. According to Article 44 of the "Road Traffic Safety Law," motor vehicles passing through intersections must comply with traffic signals, signs, markings, or the directions of traffic police. Violating traffic signal rules, such as running a red light, results in a 6-point penalty. Running a red light refers to the act where, when the vehicle is within the stop line, the forward direction is already a red light, but the vehicle continues to move forward until both the front and rear wheels have completely crossed the stop line. This is determined by capturing three photos via electronic cameras: A photo of the vehicle crossing the intersection stop line, showing the red light and license plate number. A photo of the vehicle completely crossing the stop line, showing the red light and license plate number. A photo of the vehicle continuing to move, comparing to check if the vehicle's position has changed, showing the red light and license plate number. If these three photos are captured, the vehicle is determined to have run a red light. Running a red light is not considered illegal under the following circumstances: Yielding to emergency vehicles: Yielding to special vehicles such as ambulances or fire trucks. If a violation is captured by surveillance cameras due to yielding to emergency vehicles, the act of running a red light will not be recorded during manual review. Even if recorded, you can apply for reconsideration at the traffic police department. Extreme weather: When visibility is extremely low, making it difficult even for electronic police to clearly see the traffic lights. Photos of the violation may be blurry, and if you accidentally run a red light, the traffic police will not impose a penalty. Emergency situations: If a citizen transports a patient with a critical condition, they can provide proof from the hospital or the person being assisted to the traffic police for verification. If confirmed, the violation record can be expunged. If possible, it is best to call an ambulance to avoid running a red light and causing a traffic accident. Traffic police direction: During peak commuting hours, traffic police may temporarily direct traffic at major intersections. Drivers must follow the gestures of the traffic police.
4
4
Share

Does a small amount of water entering through an open window during rain have a significant impact?

If only a small amount of water has entered, it indicates minimal impact. If electrical equipment remains unaffected, simply visit a 4S dealership for a drying treatment—generally, this should resolve the issue. However, if rainwater has seeped into the carpet or floor mats, they should be removed, cleaned, and dried. After addressing the water accumulation, it's advisable to disinfect the interior to prevent lingering odors. Seats that get wet may develop mold. Avoid using a hot air blower to dry them; instead, utilize seat heating functions if available to expedite moisture evaporation. Once air-dried, apply a leather polish cleaner. For sponge seats, consider disassembling and air-drying the inner sponge. Avoid fully submerging carpets in water for cleaning, as this can damage the adhesive layers between different materials and prolong drying time, leading to prolonged dampness inside the vehicle. For leather seats, refrain from using direct heat for drying, as this can cause mold, odors, and damage. Instead, use a cotton cloth to absorb moisture, followed by a leather coloring cleaner once dry. Additional precautions for water ingress include: 1. Disconnect the battery's negative terminal promptly to prevent electrical short circuits. 2. Inspect the engine immediately for water in the cylinders, which can bend connecting rods and damage the engine. 3. Check engine oil for water contamination, as this degrades lubrication and accelerates engine wear. 4. Examine the transmission for water entry, which can degrade gear oil and cause gear wear. 5. Assess brake fluid for water contamination, which compromises braking efficiency. 6. Remove water from the exhaust system promptly to prevent clogging of the catalytic converter or damage to oxygen sensors. 7. Verify the battery for water ingress; replace electrolyte if necessary. 8. For automatic transmissions, inspect both the transmission and its control unit for water damage. Seek professional assistance if water is detected to eliminate safety hazards. 9. Dry any soaked interior items promptly to prevent mold growth.
14
3
Share

How to Pay for Driving Test Retake Fees?

Students can independently schedule the test on the traffic management website, and the retake fee can be paid online in the self-service payment section. Here is relevant information: Driving License Test: The test subjects include three items: traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving). The order of the test subjects is as follows: traffic regulations and related knowledge (referred to as Subject 1), field driving (referred to as Subject 2), and road driving (referred to as Subject 3), conducted in sequence. Related Rules: During the test, if a subject is failed, the following subjects will not proceed. Each subject has two attempts, and if both attempts are failed, the test is terminated. The retake fee can be paid during the validity period of the learning driving permit, and the retake can be taken after further study. Regarding the retake fees, due to varying local conditions, the fees for retakes differ.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.