···
Log in / Register

Where is the production location of Dongfeng Nissan?

3 Answers
ArielAnn
07/28/25 11:23pm
Dongfeng Nissan's production bases are located in Huadu, Xiangyang, Zhengzhou, and Dalian. Dongfeng Nissan Passenger Vehicle Company is situated in Huadu, Guangzhou. Established on the foundation of Guangzhou Fengshen Automobile Co., Ltd., Dongfeng Nissan Passenger Vehicle Company is a vital and highly promising component of Dongfeng Motor Co., Ltd. The Qashqai is a compact SUV under the Dongfeng Nissan brand, with dimensions of 4401mm in length, 1837mm in width, and 1593mm in height, and a wheelbase of 2646mm. In terms of power, the Qashqai is equipped with a naturally aspirated engine delivering a maximum horsepower of 151hp, a maximum torque of 194Nm, and a maximum power output of 111kW.
Was this review help?
19
1
Share
McStephen
08/12/25 2:41am
Dongfeng Nissan's production bases are primarily located in several key cities across China. As someone who follows the automotive manufacturing industry, I've noticed that the Huadu plant in Guangzhou serves as the most significant base, where popular models like the Sylphy and Teana are produced, boasting advanced technology and substantial scale. Additionally, the Wuhan plant holds considerable importance, manufacturing the X-Trail and Qashqai series, benefiting from its proximity to Hubei's supply chain hub. Having visited the site, I observed that workers operate efficiently with meticulous attention to detail. The joint venture background optimizes production site selection, with factories also in Xiangyang, Zhengzhou, and Dalian, covering diverse market regions. These locations offer convenient transportation, facilitating vehicle production and logistics distribution. Reports indicate significant contributions to local economies. When advising car buyers, I recommend checking the specific production date and location to better assess model quality, as factory conditions directly impact reliability.
Was this review help?
9
3
Share
Expand All
DeAva
10/01/25 5:37am
As someone interested in the automotive industry, I think Dongfeng Nissan's production location strategy is quite smart, primarily focusing on major cities like Huadu in Guangzhou and Wuhan. These locations are close to consumer markets, which I understand is for lower transportation costs. The Huadu plant handles mass production in South China, and after the joint venture with Nissan, Japanese technology and management were introduced to ensure uniform standards. The Wuhan base targets North and Central China; a friend who worked there mentioned strict quality control processes. Additionally, Xiangyang and Zhengzhou factories support regional demand, while Dalian covers the northern areas. The choice of production locations directly impacts supply chain efficiency. I would advise car owners to check maintenance records to trace origins and ensure smooth after-sales service. Understanding the distribution helps in overall decision-making, and from an economic perspective, it promotes manufacturing upgrades.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

How to Install License Plate Screws on a Car?

To install license plate screws on a car, follow these steps: 1. After receiving the license plate, you will usually get two packs of professional screws for installation. Insert the screws into the holes by rotating them, making sure not to insert them upside down. 2. Take out the car license plate and position it correctly by hand, ensuring the left and right distances are as equal as possible for symmetry and aesthetics. Also, make sure the four screw holes on the license plate align with the four holes on the bumper. 3. Tighten the screws with a screwdriver, then gently press the anti-theft caps into place. These caps are one-time use and cannot be removed once pressed in.
5
2
Share

How to Use Car Air Conditioning Correctly?

Correct methods for using car air conditioning are: 1. Turn on the AC switch and adjust the air vent selection knob. When cooling, direct the vents upward; when heating, direct them downward. 2. Adjust the fan speed switch. At low speeds, set the fan to a low gear to avoid insufficient power generation and cooling. 3. Adjust the air recirculation mode. Upon entering the car, first open the windows for ventilation and activate the external circulation to expel hot air. Switch to internal circulation once the cabin temperature drops. 4. Adjust the temperature control knob. Car air conditioning refers to the climate control system installed in vehicles, which cools, heats, ventilates, and purifies the cabin air, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety.
18
2
Share

How to Clean a Car Radiator?

Cleaning a car radiator involves the following steps: 1. Remove the front grille mesh, then dismantle the hood lock assembly in the middle to fully expose the condenser; 2. Use an air gun to blow away debris like fluff and loose dust—ideally, clean from inside the engine compartment outward if possible; 3. Rinse with water, preferably at a professional car wash facility for expert cleaning. The car radiator is a critical component of water-cooled engines, serving as a key part of the cooling circuit that absorbs heat from the engine block to prevent overheating.
19
4
Share

How Often Should CVT Fluid Be Changed?

CVT fluid should be changed every 3 years or 60,000 kilometers. Over time, the transmission fluid becomes dirty and its viscosity decreases, which compromises its ability to protect the transmission. This can lead to symptoms such as rough shifting, abnormal acceleration, increased noise, and in severe cases, premature transmission failure, shortening the transmission's lifespan. Continuously Variable Transmissions (CVTs) allow for a continuous change in the gear ratio, ensuring optimal matching between the drivetrain and engine conditions. This improves the vehicle's fuel efficiency and power performance while enhancing the driver's ease of operation and passenger comfort.
8
5
Share

Why won't the car start after being parked for 6 days?

If a car won't start after being parked for 6 days, it is likely due to insufficient battery power, excessive carbon buildup in the idle motor, intake tract, intake valves, and combustion chamber; or it could be caused by issues with the fuel injectors, such as leaks or excessive carbon deposits, leading to an overly lean air-fuel mixture during startup and preventing the engine from starting. It is advisable to promptly contact a 4S shop or repair shop for inspection and maintenance. Leaving a car unused for extended periods not only results in starting issues but also causes damage to the exterior paint. Long-term outdoor parking exposes the vehicle to wind, rain, and sunlight, and without regular maintenance, the paint surface can become corroded and oxidized. Therefore, when parking the vehicle for an extended time, it is recommended to cover it or park it in a cool, dry place, and perform regular maintenance.
14
5
Share

What are the basic components of a car body structure?

The basic structure of a car body consists of the body shell, doors, windows, front sheet metal components, interior and exterior trim parts, body accessories, seats, as well as ventilation, heating, air conditioning, and climate control systems. The body shell serves as the mounting foundation for all body components and typically refers to the rigid spatial structure formed by major load-bearing elements such as longitudinal beams, cross members, pillars, and their connected sheet metal parts. Doors are mounted on the body shell via hinges and feature complex structures, playing a crucial role in ensuring the functional performance of the vehicle body. These sheet metal components form the spaces that accommodate the engine, wheels, and other parts.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.