Where is the production date of the Binyue located?

What to Do When the Motor Fails to Start After Water Ingress?

If the motor fails to start after water ingress, do not attempt to dry it at high temperatures. The recommended approach is to maintain a constant temperature of around 60 degrees Celsius. Hydraulic Motor: Conventionally refers to an energy conversion device that outputs rotational motion, transforming the hydraulic energy provided by a hydraulic pump into mechanical energy. High-Speed Motor: Gear motors offer advantages such as compact size, lightweight, simple structure, good manufacturability, insensitivity to oil contamination, impact resistance, and low inertia. However, they have drawbacks including significant torque ripple, lower efficiency, smaller starting torque (only 60%-70% of rated torque), and poor low-speed stability. Vane Motor: This type of hydraulic motor features vanes in the rotor slots that contact the housing (stator ring), causing the rotor to rotate under the influence of incoming fluid. Compared to other motor types, vane motors are known for their compact structure, smaller overall dimensions, low noise, and long service life. Radial Piston Motor: This motor exhibits excellent reverse characteristics, ensuring absolutely quiet operation, making it suitable for servo systems. It can operate bidirectionally as either a motor or a pump.

4

0

Share

Can I change a tire on the emergency lane if a tire bursts on the highway?

Can I change a tire on the emergency lane if a tire bursts on the highway. Choose radial tires: Radial tires have a softer carcass, with the belt layer made of high-strength, low-stretch fabric or steel cord. This makes them highly resistant to impact, with low rolling resistance and minimal energy consumption, making them ideal for highway driving. Use low-pressure tires: Low-pressure tires offer good elasticity, a wide cross-section, a large contact area with the road, thin walls, and excellent heat dissipation. These features improve the vehicle's ride comfort and steering stability, significantly extending tire life and preventing tire blowouts. Maintain standard tire pressure: Tire lifespan is closely related to air pressure. If the tire overheats due to excessive pressure, do not release air or pour cold water on the tire to cool it down, as this will accelerate tire aging. For low tire pressure, the driver should promptly inflate the tire and check for slow leaks to replace it with a tire that has better air retention.

2

5

Share

What are the standards for vehicle height, width, and length exceeding limits?

For heavy and medium-duty trucks, as well as semi-trailers carrying goods, the height from the ground must not exceed 4 meters, and vehicles transporting containers must not exceed 4.2 meters. Below is relevant information about height restrictions for blue license plate vehicles: 1. Regulations: The load carried by motor vehicles must not exceed the approved load capacity specified in the vehicle's registration certificate. The loading length and width must not exceed the dimensions of the vehicle compartment, and the following regulations must be observed: 2. Specific regulations: For heavy and medium-duty trucks and semi-trailers carrying goods, the height from the ground must not exceed 4 meters, and vehicles transporting containers must not exceed 4.2 meters; for other motor vehicles carrying goods, the height from the ground must not exceed 2.5 meters; for motorcycles carrying goods, the height from the ground must not exceed 1.5 meters, and the length must not exceed the vehicle body by 0.2 meters. The width of goods carried by two-wheeled motorcycles must not exceed the handlebars by 0.15 meters on each side; the width of goods carried by three-wheeled motorcycles must not exceed the vehicle body. Passenger cars, except for external roof racks and built-in luggage compartments, must not carry goods. For passenger cars carrying goods on roof racks, the height from the roof must not exceed 0.5 meters, and the height from the ground must not exceed 4 meters.

13

2

Share

Can the car still be driven after the clutch burns and smells once or twice?

As long as the clutch plate does not show signs of slipping, the car can still be used normally. More relevant information is as follows: 1. Some manual transmission cars may emit a burnt smell from the clutch plate after prolonged high-speed driving, which is actually a normal phenomenon. The clutch is part of the car's transmission system, and its function is to connect or disconnect the engine from the gearbox. 2. The clutch is installed between the engine and the gearbox, and the clutch pressure plate is fixed to the engine flywheel. Between the pressure plate and the flywheel is the clutch plate, which has a spline in the middle that can secure a drive shaft, which is the power input shaft of the gearbox. 3. The clutch plate is a wear-and-tear component that needs to be replaced periodically. As the car's mileage increases, the clutch plate will also wear out. When the clutch plate wears to a certain extent, it needs to be replaced. If not replaced, the clutch plate may start slipping. If the clutch plate slips, the engine's power cannot be fully transmitted to the gearbox, leading to insufficient power in the car. To replace the clutch plate, the connection between the gearbox and the engine must be disassembled, and the entire gearbox must be lifted off the car, as this is the only way to replace the clutch plate. Maintaining proper driving habits can effectively extend the service life of the clutch plate.

12

5

Share

How many cubic meters can a 13-meter vehicle carry?

13-meter vehicle can carry approximately 80 cubic meters. First maintenance is crucial: New car maintenance should be thorough. Most owners will follow the manufacturer's regulations and go to the authorized service station for maintenance when the first maintenance period arrives, as most car manufacturers offer free oil change for the first maintenance. For example, Shanghai GM provides four free oil and oil filter replacement services during the warranty period. Experts recommend that owners should definitely perform the first maintenance because the new car is in the running-in state, and the mechanical parts' running-in requires higher lubrication, which is the significance of the first maintenance. Second maintenance is also important: Replace brake pads at 40,000–60,000 kilometers. Comparatively, the second maintenance is very important. The project involves eight major parts, including the engine, automatic transmission, air conditioning system, steering system, braking system, suspension system, body part, and tires, with up to 63 items for inspection and maintenance. In addition, it includes quality test driving. It can be seen that after such numerous inspections and maintenance, the entire car condition will obviously enter the best state, and the safety of driving can be best guaranteed.

9

2

Share

Where to Get the Physical Examination for Driver's License Annual Review?

Introduction to the locations for driver's license renewal physical examination. Vehicle Management Office: If the vehicle management office provided a physical examination when you initially applied for the driver's license, then the renewal examination will also be conducted there. Medical Institutions: If the vehicle management office does not provide a renewal physical examination, drivers must go to county-level or military medical institutions at or above the regimental level for the examination. Afterward, submit the physical condition certificate to the vehicle management office, which will then issue a receipt. Traffic Violations: Before renewal, ensure that all traffic violations are resolved, fines are paid, and points are cleared. Otherwise, the vehicle management office will not issue the renewed license. Validity Period: You can apply for a renewal at the vehicle management office where the driver's license was originally issued within 90 days before the license expires. Expiration and Cancellation: If the driver's license has expired for less than one year, the renewal process follows the normal procedure. If the license has expired for more than one year but less than three years, it will be canceled, but you can still renew it by passing the subject one exam. If it has expired for more than three years, the license becomes invalid and cannot be renewed.

9

0

Share

Where is the production date of the Binyue located?

What to Do When the Motor Fails to Start After Water Ingress?

Can I change a tire on the emergency lane if a tire bursts on the highway?

What are the standards for vehicle height, width, and length exceeding limits?

Can the car still be driven after the clutch burns and smells once or twice?

How many cubic meters can a 13-meter vehicle carry?

Where to Get the Physical Examination for Driver's License Annual Review?

Is it okay to keep the car door open after the engine is turned off?

What is the C0051 Steering Wheel Position Sensor About?

How long before the expiration of a driver's license can it be renewed?

What is an Interval Speed Measurement Section?