Where is the position and direction for the car sticker gecko?

2 Answers
ConnorRose
07/24/25 7:11pm
Generally, the gecko emblem is affixed to the rear of the vehicle. Taking Audi's official Quattro emblem as a reference, the gecko's head should face the upper right. Below are the relevant details: 1. Origin of the gecko emblem: The gecko emblem actually originates from Audi's proud Quattro four-wheel-drive system. The gecko possesses strong climbing abilities, which perfectly aligns with the image and status of Audi's Quattro system in the realm of four-wheel-drive with its powerful traction. Therefore, Audi directly adopted it as the logo for the Quattro system. 2. Reason for affixing the gecko: Due to the homophonic meaning of 'gecko' in Chinese as 'avoiding misfortune' or 'protection,' symbolizing the avoidance of disasters, many Chinese people affix the gecko emblem to their cars for good luck.
Was this review help?
6
4
Share
LeAlessandra
08/11/25 10:39am
As a car owner deeply immersed in automotive culture, I often choose to place the gecko sticker on the upper corner of the rear windshield, either left or right, but avoiding the wiper area and blind spots. The direction must face outward, making the gecko appear to crawl forward, symbolizing warding off misfortune and ensuring safety. This tradition originates from the logo of Audi's Quattro all-wheel-drive system, representing good luck and the stability of all-wheel drive. Personally, after applying it, I feel more psychologically at ease, though its actual crash protection is minimal. However, it's important to regularly check that the sticker is firmly attached. Avoid placing it too low to prevent it from being washed off during car cleaning. Use a damp cloth for cleaning instead of sharp objects to avoid scratches. Adding a gecko sticker also enhances the car's personality, often attracting admiration on the road and sparking fun conversations.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Does a Small-Displacement Engine Consume More Fuel on Highways?

Small-displacement engines consume more fuel on highways. Reasons why small-displacement engines consume more fuel on highways: Small-displacement engines produce lower torque output. To maintain vehicle performance, they must operate at relatively high RPMs for extended periods, leading to increased fuel consumption. Introduction to small-displacement vehicles: By conventional definition, small-displacement vehicles typically refer to "micro cars" with engine displacements around 1.0 liters, achieving fuel consumption below 5 liters per 100 kilometers. Compared to vehicles with 1.4-liter engines, they save approximately 4 liters per 100 kilometers. For a typical family car driving 2,000 kilometers monthly, small-displacement vehicles can save nearly 1,000 liters of fuel annually. These vehicles are economical, energy-efficient, and environmentally friendly. With increasing energy constraints and potential gasoline price hikes, the energy-saving benefits of small-displacement cars are undeniable facts.
18
2
Share

What is the principle of lowering the seat height of a motorcycle?

Lowering the seat height of a motorcycle can be achieved by altering the length of one or more connecting rods in the linkage structure, thereby lowering the lower support point of the suspension. Adjusting seat height with motorcycle shock absorbers: Motorcycle seat height cannot be lowered by adjusting the shock absorbers, but it can be reduced by modifying the shock absorbers. However, the key issue is that once the shock absorber travel is reduced, it will significantly affect the comfort of the vehicle, and the shock absorbers will need to be modified again. This is because the so-called adjustable shock absorbers in the original configuration only adjust the damping effect of the vehicle, not the seat height. Modifying the motorcycle seat: Many motorcycles have thicker padding in the seat for greater comfort. In this case, you can choose to sacrifice some comfort to lower the seat height slightly by using tools to thin out the padding in the seat, or even remove all of it, leaving only the seat surface. However, riding like this can be quite uncomfortable.
19
5
Share

What is the Transmission Mileage?

Mileage refers to the total distance a car has traveled, from the time it left the factory to the present, covering all the kilometers driven. Classification of Transmissions: Car transmissions are generally divided into two types: manual transmission and automatic transmission. The oil change cycles for these two types of transmission oil differ. For manual transmission oil: it is typically checked every 10,000 to 15,000 kilometers and replaced every 50,000 to 80,000 kilometers under normal conditions. For automatic transmission oil: it is usually checked every 10,000 to 15,000 kilometers and replaced every 80,000 to 100,000 kilometers under normal conditions. Importance of Changing Transmission Oil: If the transmission oil is not changed for a long time, the vehicle may experience sluggish starts when cold. Prolonged failure to change the transmission oil can cause the oil to become thick, leading to blocked transmission radiators, which in turn can cause the transmission oil temperature to rise excessively, accelerating wear and, in severe cases, damaging internal transmission components.
19
0
Share

How to Refill Refrigerant in a Car Air Conditioner?

Car air conditioner refrigerant refilling method is: 1. Prepare tools and materials such as car refrigerant recovery and refilling machine, refrigerant, etc.; 2. Connect the car refrigerant recovery and refilling machine pipelines to the car air conditioner's high and low pressure pipes; 3. Perform vacuum extraction on the car air conditioner; 4. Set the refilling capacity, time, and type on the refrigerant recovery and refilling machine; 5. The refrigerant recovery and refilling machine will automatically start adding refrigerant. Functions of car air conditioner: 1. Achieve cooling effect through continuous circulation and transformation of refrigerant; 2. Draw in fresh external air for ventilation and air exchange, preventing window fogging; 3. Use engine coolant, waste heat, or heat generated by a burner as a heat source for heating, which is then blown into the car by a blower to raise the temperature and achieve heating effect; 4. Remove dust, odors, smoke, and toxic gases from the car air, making the air fresh, and humidify the car air to increase relative humidity.
9
5
Share

What does compact mean?

Compact cars, also known as A-segment cars, are the most common type of family vehicles. In foreign countries, family cars are generally compact cars. The standard specifications include an overall length of 4.2-4.6 meters, a wheelbase between 2.4-2.7 meters, and an engine displacement typically around 1.6-2.0 liters. There are many models of compact cars available. The advantages of compact cars are as follows: 1. High cost-effectiveness: Compact cars offer excellent value for money with a wide price range. Generally, the exterior design, performance, and interior of compact cars are very good, the space can meet the needs of a family of three, and the fuel consumption is not high. 2. High practicality: Compact cars can meet various needs, whether for urban commuting, self-driving trips, or highway driving. 3. Manufacturer focus: Due to the high demand and recognition of compact cars in the current domestic car market, major manufacturers pay great attention to compact car models, offering a wide variety of styles and choices, along with many discounts.
3
5
Share

What is the top speed of the Baodiao 400?

The top speed of the Baodiao 400 is 190 km/h. Methods to increase motorcycle top speed: Weight reduction: Increased rider weight means reduced performance, which is a major factor preventing the motorcycle's speed and fuel consumption from reaching ideal levels. If carrying a passenger is unnecessary, removing the rear footpegs and grab handles can reduce weight at minimal cost. If possible, replacing the wheels and swingarm with carbon fiber components will result in a qualitative leap. Air filter: Replacing the stock air filter with a performance-oriented one is one of the best ways to improve motorcycle performance, as it is the simplest and most affordable modification. A freer-flowing intake allows more oxygen to enter the combustion chamber, which means more gasoline can be burned to produce greater power. Carburetor adjustment and ECU remapping: Motorcycles with carburetors are simpler in this regard, as merely adjusting the carburetor's air-fuel mixture ratio can achieve excellent throttle response and power output. More gasoline is drawn into the engine, allowing oxygen to be utilized more efficiently.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.