Where is the Peugeot 408's cabin air filter located?

1 Answers
JoelDella
07/29/25 5:36pm
The Peugeot 408's cabin air filter is located on the left side of the glove compartment in the front passenger seat. Specifically, it's near the center console where the front passenger's left leg would be. The cabin air filter, also known as the interior filter, is responsible for filtering the air inside the vehicle cabin. Here's some relevant information: 1. Function of the cabin air filter: The car's cabin air filter is designed to filter out dust and impurities from the air, while also effectively filtering harmful gases and various odors, serving to purify the air inside the vehicle. 2. Replacement cycle: The cabin air filter requires regular replacement. Generally, it should be replaced every 1-2 years or every 10,000-20,000 kilometers, depending on individual driving habits, external environment, and seasonal climate. If the vehicle is frequently driven in poor conditions with lots of dust, the filter will get dirty more quickly and should be replaced sooner. Additionally, since air conditioning usage varies by season, the replacement cycle may differ accordingly. During spring and autumn when air conditioning is used less frequently, the replacement interval can be extended.
Was this review help?
5
1
Share
More Forum Discussions

What to Do If You Forgot to Release the Handbrake and Drove a Short Distance?

Forgetting to release the handbrake and driving a short distance usually does not cause serious consequences, unless you have driven dozens of kilometers, in which case there is no need to worry too much. Below is some relevant information about the car handbrake: 1. Introduction to the Handbrake: The professional term for the handbrake is the auxiliary brake, which uses a steel cable connected to the rear brake shoes to brake the car. 2. Consequences of Incorrect Use: Driving without releasing the handbrake most directly affects the accelerated wear of the brake disc, as well as the hardening of the brake pads due to overheating, and the stretching of the handbrake cable. If you drive for a long time with the handbrake engaged, it may lead to brake fluid leakage from the brake cylinder, and in severe cases, it may cause the complete failure of the braking function.
7
2
Share

Why is the battery light on the car dashboard illuminated?

The illumination of the battery light on the dashboard indicates that the vehicle's battery voltage is too low or there is a fault in the generator system. Below is additional information related to the battery light being on: 1. Common faults when the battery light is on: (1) Battery failure, such as depleted charge or battery malfunction. (2) Loose or oxidized terminals leading to poor contact. (3) Aging, overly loose, or slipping generator belt causing the power supply system to malfunction. (4) Faults in the generator voltage regulator or excitation circuit leading to abnormal operation. 2. Maintenance recommendations for the battery light being on: (1) For battery faults, first use a multimeter to check the battery voltage. If the voltage is too low, remove the battery and charge it with a dedicated charger or replace it. If the battery is faulty, it must be replaced with a new one. (2) For terminal faults, inspect the positive and negative terminals of the battery for looseness or severe oxidation causing poor contact. Clean and tighten the battery terminals to restore proper contact. (3) For generator belt issues, visit a 4S shop for inspection or repair, which may involve replacing the belt or adjusting the tensioner pulley. (4) For generator faults, troubleshooting should be based on the specific fault.
10
3
Share

What are the consequences of a deformed automotive steering knuckle?

Deformation of the automotive steering knuckle can cause the steering wheel to shake during vehicle operation. Below is a related introduction to the symptoms of a bent steering knuckle arm malfunction: 1. Front wheel alignment deviation: Steering knuckle arm deformation. Lack of lubrication or damage to the steering knuckle thrust bearing. Excessive clearance or lack of lubrication between the steering knuckle kingpin and bushing. Front axle or frame deformation causing front wheel alignment deviation. 2. Overly tight assembly: Insufficient tire pressure. Steering gear bearings assembled too tightly. Excessive meshing clearance in the transmission pair. Excessive tightness or lack of lubrication in the tie rod ball joints. 3. Increased friction: Steering shaft or main pipe bending causing mutual friction or jamming. Improper lubrication of the steering system, incorrect toe adjustment.
12
4
Share

How to Fix Steering Wheel Misalignment?

Steering wheel misalignment requires checking tire pressure followed by a four-wheel alignment. Below is relevant information about steering wheel misalignment: 1. Symptoms: When users notice heavy steering, shaking, pulling to one side, misalignment, failure to return to center, or abnormal tire wear such as one-sided wear, wave-like wear, block wear, or uneven wear, as well as floating, bumpy, or swaying sensations while driving, they should consider checking the wheel alignment values. 2. Common causes: (1) Changes in four-wheel alignment. Driving on uneven roads for extended periods can alter four-wheel alignment parameters, leading to steering misalignment. (2) Uneven tire pressure. (3) Inconsistent tire tread patterns.
12
4
Share

How to Distinguish Between Three-Cylinder and Four-Cylinder Engines?

To distinguish between a three-cylinder and a four-cylinder engine, simply open the engine hood and check the number of intake and exhaust manifolds. A three-cylinder engine has three intake and exhaust manifolds, while a four-cylinder engine has four. Here is more information about three-cylinder and four-cylinder engines: 1. Pros and Cons of Three-Cylinder Engines: Due to their inherent structure, three-cylinder engines are less smooth in operation compared to four-cylinder engines. However, three-cylinder engines have lower fuel consumption, lower exhaust emissions, and are smaller and lighter. Engineers use various technical measures to compensate for the shortcomings of three-cylinder engines, such as balance shafts and specially designed engine mounts, which reduce engine vibration and prevent it from being transmitted to the cabin. 2. Advantages of Four-Cylinder Engines: Four-cylinder engines offer smoother operation.
9
5
Share

How Long is BMW's Warranty Period?

The warranty period is 3 years or 100,000 kilometers. Here is more information about BMW's warranty: 1. Warranty coverage: If a vehicle fault or component damage occurs during normal use as specified by the manufacturer, the manufacturer provides free repair or replacement services. Additionally, if the vehicle requires towing due to quality issues, the associated costs are also covered by the manufacturer. 2. Situations not covered by the warranty: (1) Damage caused by accidents, collisions, fire, theft, freezing, or other external factors. (2) Unauthorized modifications or additions to vehicle components by the owner, including changes to the body or chassis that result in vehicle malfunction or damage. (3) Damage caused by the use of non-genuine BMW parts. (4) Vehicle faults or damage resulting from repairs not performed at an authorized BMW service center.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.