Where is the Peugeot 408's Cabin Air Filter Located?

What is the actual fuel consumption of the Q5?

Audi Q5's actual average fuel consumption is 11L/100km. The Audi Q5 is equipped with a 2.0TFSI four-cylinder inline engine and a 7-speed Stronic dual-clutch transmission, providing ample power output, smooth gear shifts, and relatively fast acceleration. Its fuel consumption is quite economical, with urban driving conditions averaging around 12L/100km, while highway driving can be controlled at about 10L/100km. Below are the reasons for higher fuel consumption in the Audi Q5 during actual driving: 1. Prolonged high-speed driving: Extended high-speed driving increases air resistance, thereby increasing fuel consumption. 2. High vehicle weight: The car's own weight is relatively high, and carrying more items inside the car increases the load, leading to higher fuel consumption. 3. During driving, especially in urban areas with heavy traffic, frequent rapid acceleration and sudden braking can increase fuel consumption.

9

5

Share

Are Vehicle Inspection Stations Open on Weekends?

Most vehicle inspection stations are closed on Saturdays and Sundays. The inspection process is as follows: 1. Bring your driver's license, ID card, vehicle registration, and the current valid compulsory traffic insurance policy. Drive the vehicle to the vehicle management office or an authorized inspection station for inspection. 2. Fill out the annual vehicle inspection application form at the vehicle management office. Then submit the form and other required documents to the staff and pay the inspection fee. 3. After payment, proceed to the exterior inspection area where staff will check the vehicle's appearance. Ensure you have a fire extinguisher and warning triangle ready. Once the exterior inspection is completed, the vehicle will immediately undergo the online inspection. After the online inspection is finished, return to the main hall and collect the inspection pass form from the designated window. 4. Take the pass form to the specified window to receive the annual inspection sticker and the environmental inspection pass sticker, completing the inspection process. When collecting the annual inspection sticker and environmental sticker, provide a copy of the vehicle registration for each, which can be prepared in advance.

15

5

Share

How to Determine if an Oxygen Sensor is Faulty?

You can determine if an oxygen sensor is faulty by observing the color of its tip: 1. Light gray tip: This is the normal color for a functioning oxygen sensor. 2. White tip: Caused by silicon contamination, the oxygen sensor must be replaced in this case. 3. Brown tip: Caused by lead contamination; if severe, the oxygen sensor must also be replaced. 4. Black tip: Caused by carbon buildup; after addressing the engine's carbon deposit issue, the sensor's carbon buildup can usually clear automatically. Below are common faults of oxygen sensors: 1. Oxygen sensor poisoning. Ensure proper selection and installation of rubber gaskets during repairs. 2. Carbon buildup. Symptoms include increased fuel consumption and significantly higher emissions. Removing the deposits can restore normal operation. 3. Ceramic breakage in the oxygen sensor. Striking with hard objects or using strong airflow for cleaning can cause the ceramic to break, rendering the sensor ineffective. Replace the sensor promptly if any issues are detected.

6

3

Share

What is the N gear in an automatic transmission?

N stands for Neutral. To prevent the vehicle from rolling on a slope, always press the brake pedal when in Neutral. When the gear lever is in the "N" position, the power connection between the engine and the transmission is cut off. For brief stops, you can place the lever in this gear and pull out the handbrake, allowing your right foot to move away from the brake pedal for a short rest. Below are some related points: 1. For safety reasons, most automatic transmission vehicles are designed by manufacturers to allow engine ignition only when the gear is in P (Park) or N (Neutral). If the car stalls unexpectedly while driving, you can shift the gear to N to restart the engine without stopping the vehicle. However, to use P gear, you must first bring the car to a complete stop. 2. Most automatic transmission models require the ignition key to be turned to the second position to power on before the gear lever can be moved from P to N. If shifting is impossible due to various malfunctions, you can press the SHIFT-LOCK button on the gear console with a small, hard object like a needle to move the gear from P to N.

8

0

Share

How often should a parked vehicle be started?

It is recommended to start the car once a week and let it idle for a few minutes. The reasons are: 1. When a car is not started for a long time, most of the lubricating oil adhering to the parts that should be lubricated will flow to the oil pan due to gravity, reducing the lubrication effect on the moving parts. 2. When metal is not protected by an oil film, it easily reacts with oxygen to form an oxide film, increasing friction and making it difficult to start. 3. If the battery does not receive a charge for a long time, the sulfation process of the battery plates will intensify, increasing the internal resistance of the battery and reducing its lifespan. 4. Due to the self-discharge effect of the battery, the voltage will drop below 85%, making the battery irreparable.

11

1

Share

What is the difference between MT and AT?

Transmission AT stands for automatic transmission, while MT stands for manual transmission. Here are the specific details: 1. The automatic transmission can automatically shift gears based on the car's speed and engine RPM. 2. MT, also known as manual transmission, requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, which is more fuel-efficient. AT automatic transmission consists of a torque converter, planetary gear transmission, and control mechanism. 3. The working principle of MT involves the pump wheel and turbine forming a working pair, similar to two fans placed opposite each other, where the wind from one fan drives the blades of the other, with wind acting as the medium for kinetic energy transfer. AT does not require a clutch to shift gears, has fewer gears with larger changes, and provides smooth connections, making it easier to operate and more convenient for the driver.

19

0

Share

Where is the Peugeot 408's Cabin Air Filter Located?

What is the actual fuel consumption of the Q5?

Are Vehicle Inspection Stations Open on Weekends?

How to Determine if an Oxygen Sensor is Faulty?

What is the N gear in an automatic transmission?

How often should a parked vehicle be started?

What is the difference between MT and AT?

What is the emission standard for cars purchased in 2013?

Do hybrid vehicles require a lottery in Shenzhen?

Can a Car Pass the Annual Inspection with an Aftermarket Spoiler Installed?

What is the appropriate tire pressure for cars on highways?