Where is the Peugeot 308 air conditioning filter located?

What are the consequences of oil seal leakage?

Valve oil seal leakage can lead to accelerated engine oil consumption and blue smoke from the exhaust pipe, but it has little impact on engine power. The valve oil seal prevents engine oil from entering the intake and exhaust pipes, thereby avoiding oil loss. It also prevents the leakage of the air-fuel mixture and exhaust gases, and stops engine oil from entering the combustion chamber. Below is extended information about oil seals: 1. Function: An oil seal is a mechanical component used to contain lubricants, commonly found in the bearing areas of various machinery. Its primary role is to isolate lubricated parts from the external environment, preventing lubricant leakage. It serves the dual purpose of sealing oil internally and keeping out dust externally. 2. Material: Modern oil seals are primarily made from various types of rubber, such as nitrile rubber, acrylic rubber, polyurethane rubber, silicone rubber, fluororubber, and polytetrafluoroethylene rubber. The typical structure of an oil seal is shown in the figure below (note: image removed as per instructions). It offers advantages such as simple structure, lightweight, compact installation space, and ease of manufacturing.

1

5

Share

What to Do When the Engine Delays Shutting Off After Turning Off the Key?

If the engine delays shutting off after turning off the key, it is recommended to check the following: 1. Carbon deposits on various components: Especially inside the cylinder, such as whether the spark plugs have excessive carbon buildup or if the combustion chamber has too much carbon. Since the engine operates at high temperatures, the carbon deposits inside the cylinder can remain hot and ignite the air-fuel mixture even after the spark plugs are deactivated (when the ignition is turned off). 2. Throttle: Check if it is not closing properly. 3. Fuel injector: Inspect whether the fuel injector is leaking. Precautions for using a car engine are as follows: 1. Avoid driving in neutral: The engine itself has a fuel-cut function during deceleration, and driving in neutral can actually reduce fuel efficiency. 2. Pay attention to observations: If oil is found on the ground, determine whether it is due to engine oil leakage and promptly communicate with the car dealership to eliminate potential safety hazards. 3. When brake fluid is contaminated with or absorbs water: Or if impurities or sediments are found in the brake fluid, it should be replaced or carefully filtered immediately. Otherwise, it may lead to insufficient braking pressure, affecting braking performance.

13

3

Share

What are the penalties for driving a motor vehicle after drinking alcohol?

Penalties for driving a motor vehicle after drinking alcohol include fines, suspension of the driver's license, and in severe cases, revocation of the driver's license. Decreased tactile ability after drinking alcohol: When driving after drinking, due to the anesthetic effect of alcohol, a person's tactile sensations in their hands and feet are reduced compared to normal, often making it difficult to properly control the accelerator, brakes, and steering wheel. Decreased judgment and operational ability after drinking alcohol: After drinking, the reaction time to light and sound stimuli is prolonged, and the time for instinctive reflex actions is also extended accordingly. The coordination function between sensory organs and motor organs such as the eyes, hands, and feet is impaired, making it impossible to correctly judge distance and speed.

19

5

Share

What do the front and rear windshield defogger icons look like?

The front windshield defogger icon is fan-shaped, while the rear windshield defogger icon is a rectangular frame. Differences between front and rear windshield defogging: Front windshield defogging is achieved by blowing air, and the compressor for front windshield defogging will be activated. Rear windshield defogging uses heating wires. The front windshield defogging symbol is a fan shape with airflow markings inside, while the rear windshield defogging symbol is a square with airflow markings inside. Reasons for windshield fogging: Most cases of windshield fogging occur due to a significant temperature difference between the inside and outside of the vehicle. When the outside temperature is lower than the inside temperature, the air inside the car cabin condenses and forms mist on the inner surface of the windshield.

2

5

Share

What Tools Are Used for Car Polishing?

Tools required for car polishing: polishing machine, clay bar or decontamination pad, wool pad and foam pad, various types of polishing compounds. Introduction to car polishing: Car polishing involves using a polishing machine with polishing pads and compounds to evenly grind the car's paint. It primarily relies on the cutting force of the polishing pad and the fine particles in the compound to heat and soften the paint, allowing the surrounding paint to fill in scratches. This process results in a smooth and glossy finish, making scratches invisible. Precautions for car polishing: If your car needs polishing, it is recommended to visit a professional auto detailing shop. Achieving good results without a polishing machine is difficult, and improper operation can damage the car's paint.

6

4

Share

How much is the fine and how many points are deducted for modified vehicles?

The Road Traffic Safety Law stipulates: Driving an illegally modified motor vehicle on the road will result in a fine, revocation of the driver's license, and confiscation of the vehicle. For illegally modified motorized vehicles, the public security traffic management department will not issue a safety technical inspection qualification mark. If it constitutes a violation of public security management, the public security organs will impose penalties such as fines or detention in accordance with the relevant provisions of the Public Security Administration Punishment Law. Modifications within the legally permitted scope and applying for a change of registration with the vehicle management office at the place of registration within 10 days are considered legal modifications. Currently, modifications allowed in China include: 1. Appearance modifications: The installation of exterior parts must ensure they do not harm pedestrians during use and do not exceed a certain proportion of the vehicle's dimensions; 2. Front bumper modifications: Replacing the front bumper is considered altering the vehicle's appearance and is feasible after approval. However, modifications should not be excessive, as overly exaggerated changes may fail manual approval; 3. Vehicle color modifications: Changing the vehicle's color only requires notification and approval. Therefore, if you dislike the current color, you can apply for a change yourself. However, the vehicle body cannot have more than three main colors and must not contain advertising content. The use of colors reserved for specific vehicles is prohibited, such as fire engine red, engineering vehicle orange, police vehicle blue-white, and camouflage colors for special vehicles. Additionally, the color must not be the same as public transport vehicles, taxis, or other public service vehicles.

6

5

Share

Where is the Peugeot 308 air conditioning filter located?

What are the consequences of oil seal leakage?

What to Do When the Engine Delays Shutting Off After Turning Off the Key?

What are the penalties for driving a motor vehicle after drinking alcohol?

What do the front and rear windshield defogger icons look like?

What Tools Are Used for Car Polishing?

How much is the fine and how many points are deducted for modified vehicles?

How many microns of cylinder head deformation is normal?

Will I be caught driving at 100 km/h in an 80 km/h speed limit zone during rain?

What is the 0-100 km/h acceleration time of the Xingyue?

What to Do If the Windshield Wipers Start by Themselves and Can't Be Turned Off?