Where is the Peugeot 307's cabin air filter located?

1 Answers
VonKevin
07/30/25 6:09am
Peugeot 307's cabin air filter is located in the engine compartment, specifically in the upper left corner. After removing two bolts and taking off the partition, you will see a box cover with a handle, inside which is the cabin air filter. The air conditioning system filters the air through the cabin air filter before blowing it into the cabin, making regular replacement and cleaning of the filter essential for the health and safety of the driver and passengers. The Peugeot 307 measures 4212mm in length, 1762mm in width, and 1531mm in height, with a wheelbase of 2608mm. In terms of power, this car is equipped with either a 1.6L or a 2.0L engine.
Was this review help?
14
2
Share
More Forum Discussions

Can a small chunk missing from the tire sidewall be repaired?

If a chunk is scraped off the tire and the cords are damaged, it can no longer be used as it poses a significant safety hazard. Details are as follows: 1. Damaged cords: If the sidewall damage reaches the cords, it cannot be repaired—neither mushroom plug patches nor hot patches will work. These repair methods are only temporary fixes and cannot address the root issue, making continued use prone to blowouts. 2. Undamaged cords: To check whether the cords are damaged, visually inspect the wound for exposed white threads—if visible, the cords are compromised. Alternatively, perform a pressure test by increasing the tire pressure by 1-2 kg above the standard level, driving briefly to raise the tire temperature, and observing whether the wound changes or bulges. If no issues appear, reset the pressure to the standard value, and the tire can be used for short-distance urban driving.
1
1
Share

What does the yellow pavement marking at the center of an intersection mean?

It's a grid marking. All vehicles are strictly prohibited from stopping either temporarily or for a long time to prevent traffic congestion. Specific explanations are as follows: 1. No stopping: The yellow grid marking on the pavement indicates that all vehicles are strictly prohibited from stopping either temporarily or for a long time to prevent traffic congestion. When there is a vehicle stopped ahead of the yellow grid marking, the following vehicle must wait outside the yellow grid marking until it is confirmed that there is enough space ahead of the yellow grid marking for the vehicle to stop before it can proceed across the yellow grid marking. 2. No occupying: In addition, yellow grid markings are painted in front of important state organs, military units, large enterprises and institutions, and public transport hubs to ensure that vehicles are not blocked by congested vehicles when entering or exiting. The grid marking is yellow, and occupying it when stopping is prohibited.
5
3
Share

How Many Years Are Exempt from Inspection for Small Cars, and Which Year Requires an Inspection?

Small passenger cars are exempt from inspection for the first 2 years and require an inspection in the seventh year. Additionally, they must undergo an annual inspection every 2 years within the first 6 years. Below is relevant information about small car inspections: 1. Rules for small car inspections: According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law," effective from July 1, 2018, motor vehicles must undergo safety technical inspections within the following periods from the date of registration: passenger vehicles for commercial use must be inspected annually within the first 5 years, and every 6 months after exceeding 5 years, etc. 2. Rules for vehicle inspection labels: Starting from June 20, 2020, electronic vehicle inspection labels have been implemented nationwide. Electronic inspection labels are issued through the unified national internet traffic safety service platform. Vehicle owners can apply for electronic inspection labels via the internet traffic safety service platform or the "Traffic Management 12123" mobile app.
14
1
Share

What kind of engine oil is recommended for Golf?

Golf is recommended to use fully synthetic engine oil. The following are the differences between fully synthetic and semi-synthetic engine oils: 1. Different usage environments: Fully synthetic engine oil: Fully synthetic engine oil has a wider temperature range and longer service life, achieving engine protection with lower viscosity. Semi-synthetic engine oil: It is not suitable for use in low-temperature regions and has a shorter service life. 2. Different qualities: Fully synthetic engine oil: Fully synthetic engine oil is a high-grade oil among engine oils. It is made from ethylene and propylene dispersed from natural gas or gas in crude oil, which are then polymerized and catalyzed through complex chemical reactions to form a lubricating fluid composed of large molecules. Semi-synthetic engine oil: Semi-synthetic engine oil contains a smaller percentage of high-performance fluids and includes conventional mineral oil, utilizing the poorer components of crude oil.
3
5
Share

What Causes the Focus Engine to Shake?

The reasons and solutions for the Focus engine shaking are as follows: 1. Ignition system failure: Spark plugs, high-voltage wires, and ignition coils may experience poor performance after a certain period of use. Solution: Check the condition of the spark plugs, high-voltage wires, and ignition coils, and replace the spark plugs if necessary. 2. Aging engine components: When the car engine is idling and the electrical system is turned on, it increases the engine load, causing idle speed to drop. To compensate for the shaking caused by the drop in idle speed, the engine will automatically increase the RPM slightly. Solution: Replace the engine mounts. 3. Unstable oil pressure: Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause engine shaking. Solution: Visit a 4S shop to check the fuel pressure and the intake pressure sensor for normal operation, and replace related components if necessary.
19
2
Share

How to turn off the BMW X3 auto start-stop system?

Method to turn off the BMW X3 auto start-stop function: Simply press the A-off button manually to deactivate it. Below is an introduction to the auto start-stop feature: 1. Working principle: The auto start-stop function automatically shuts off the engine when the car is waiting at a traffic light or briefly stopped, and automatically restarts the engine when needed. Its working principle involves installing a reinforced motor with start-stop functionality on the engine. When the conditions for stopping are met, the engine stops operating, and when it's time to move forward, the motor issues a start command, enabling the engine to start in the shortest possible time. 2. Advantages: The auto start-stop function can save fuel consumption and reduce exhaust emissions into the air. According to statistics, under normal circumstances, a car can save 5% of fuel, and in congested road conditions, it can save up to 15% of fuel, contributing to energy conservation and environmental protection.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.