Where is the parking brake located on the GL8?

1 Answers
SanAxel
09/03/25 8:13am
It is located on the left side near the left foot. Here is some additional information: 1. Electronic parking brake: The electronic parking brake, also known as the electronic parking brake system, integrates the temporary braking function during driving with the long-term braking function after parking, and achieves parking braking through electronic control. 2. Principle: The electronic parking brake is a technology that realizes parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both of which control parking braking through the friction generated between the brake disc and the brake pad. The only difference is that the control method has changed from the previous mechanical handbrake lever to an electronic button.
Was this review help?
19
5
Share
More Forum Discussions

How to reset the maintenance wrench on SWM G05?

Turn off the ignition switch. Press the reset button with your left hand. Turn on the ignition switch with your right hand, then release the reset button.
15
0
Share

Why is the brake still engaged when the air brake is released?

This situation is caused by the one-way check valve of the brake vacuum pump being stuck. The only solution is to replace the check valve assembly to eliminate the fault. If it's a drum brake, take it to a repair shop and disassemble it to check if the brake pads are worn.
12
4
Share

How to Fill in the Vehicle Identification Number Location?

The vehicle identification number for an electric bicycle is located on the rear wheel of the e-bike, where you can see the brand of the e-bike and a string of alphanumeric characters. The location of the motor number may vary for different brands. Generally, it is on the rear wheel, and you can rotate the wheel to view the motor number.
8
2
Share

How to reset the service light on SWM X7?

With the engine off, press and hold the trip distance counter reset button. Turn the ignition switch to the ON position, and the SERVICE indicator will appear on the display. Turn off the engine to reset the reminder message. Turn the ignition switch to the ON position, and the "SERVICE" indicator will disappear.
6
0
Share

How to Check the View as a Beginner Driver?

Areas not visible from the driver's seat are blind spots inside the car. Children, objects, and road surfaces within these blind spots are not visible to the driver. To get a sense of the size of the front and rear of the vehicle, use reference points to gauge the four corners of the vehicle and the trajectory of the wheels, which can help develop a good sense of positioning.
20
3
Share

How to reset the tire pressure warning on the new A6L?

Check if there are any punctures. Of course, you should go to the 4S shop for repair as soon as possible. Press the CAR button on the control panel, use the selection button to bring up the tire pressure monitoring system, enter, and select 'Store tire pressure'.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.