Where is the Outlander's cabin air filter located?

2 Answers
MacAdrian
07/24/25 11:57am
The Outlander's cabin air filter is located behind the glove compartment on the passenger side. Here is some additional information about the cabin air filter: 1. The cabin air filter is very important for the car and should be replaced regularly: It is recommended to replace the cabin air filter every 10,000 kilometers. 2. Regular cleaning of the air conditioning system is essential: Prolonged use of the car's air conditioning can lead to bacterial growth. If not cleaned regularly, it can affect the health of the passengers. 3. Cleaning the cabin air filter: Do not use low-quality cleaning agents to clean the cabin air filter, as frequent use can damage the blower motor bearings.
Was this review help?
11
0
Share
Stewart
08/11/25 6:06am
I remember when I drove the Outlander, I enjoyed tinkering with small car parts myself. The cabin air filter is located behind the glove compartment in front of the passenger seat. To access it, you first need to open the glove box, locate the plastic clips and bolts inside, which can usually be unscrewed gently by hand or with small pliers. Slowly pull the compartment downward, being careful not to tug too hard to avoid damaging any wires, and then you'll see the filter housing. The cover is typically a sliding type—just move it aside to reveal the filter. If you're replacing it yourself, it's recommended to check every six months or every 10,000 kilometers, or more frequently in areas with poor air quality. Don't wait until there's a musty smell or reduced airflow from the AC to address it—this filter traps dust and pollen, protecting respiratory health. A universal replacement costs just a few dozen bucks, much cheaper than going to a repair shop. When installing the new filter, make sure to align it with the arrow direction to avoid clogging the system.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

Should the Oil Filter Be Replaced When Changing Engine Oil?

When changing engine oil, it is necessary to replace the oil filter. If the filter is not replaced during an oil change, the new oil will be contaminated by the dirt retained in the filter paper as it passes through the filter, causing the new oil to become dirty quickly. Prolonged failure to replace the oil filter will significantly reduce its filtering efficiency, rendering it ineffective. Continuous driving under such conditions can accelerate wear on the internal components of the engine, and in severe cases, may lead to oil burning. The functions of engine oil include: 1. Reducing friction and high temperatures; 2. Minimizing gas leakage and preventing contamination from external pollutants; 3. Protecting components from contact with water, air, and harmful acidic gases; 4. Cushioning the pressure rise in the engine cylinder ports; 5. Flushing away dirt generated on the working surfaces of components.
3
0
Share

Where is the spark plug located on a scooter?

The spark plug on a scooter is located on the engine cylinder. As part of the engine's ignition system, the spark plug is responsible for igniting the combustible air-fuel mixture inside the engine. It plays a crucial role in engine operation - without it, the engine cannot function properly. The engine's working strokes consist of: intake stroke, compression stroke, power stroke, and exhaust stroke. A motorcycle is an agile and fast means of transportation, powered by a gasoline engine. It's a two-wheeled or three-wheeled vehicle steered by handlebars that control the front wheel. With advantages of being lightweight, maneuverable and fast, motorcycles are widely used for patrol duties, passenger/cargo transportation, and as sports equipment.
10
0
Share

Where should the temporary license plate be affixed?

Temporary license plates should be affixed to: 1. The front windshield; 2. The rear windshield. A new car without a temporary license plate cannot legally drive on the road. A temporary license plate is a provisional motor vehicle license plate applied for, valid for fifteen days. New cars can apply for temporary license plates before they are officially registered. Notes on temporary license plates: 1. After purchasing a new car, you need to apply for a temporary license plate at the local vehicle management office; 2. When the vehicle is registered and the official license plate has been paid for, you need to apply for a temporary license plate at the vehicle management office and affix it to the car to drive the vehicle back to your locality; 3. If the vehicle has not been issued an official license plate locally but needs to be modified elsewhere, you need to apply for a temporary license plate locally to drive the car to the modification site. After modification is completed, you need to apply for another temporary license plate from the local vehicle management office to drive back to your locality; 4. If the car is not registered but needs to be driven on the road, you need to apply for a temporary license plate locally.
2
1
Share

How to Set Up Auto-Locking for Cars?

For automatic transmission vehicles, the method to set up auto-locking is: 1. Shift to the P position, then turn the key to the ON position; 2. Close all doors, press and hold the lock button for about 6 seconds until the hazard warning lights on the dashboard flash twice, indicating the setup is complete. For manual transmission vehicles, the method is: 1. Turn the ignition switch to the ON position, within 20 seconds press and hold the electric door lock switch to LOCK for 5 seconds. If the operation is successful, the hazard warning lights will flash twice for activation and once for deactivation. The purpose of the auto-locking function is anti-theft, allowing the doors to lock quickly after driving starts, preventing incidents like door-pull robberies during traffic jams or at traffic lights, thereby providing a certain level of security.
20
0
Share

Can the 1.2T engine of Lavida use 92 gasoline?

The 1.2T engine of Lavida cannot use 92 gasoline; it requires 95 gasoline. Using 92 gasoline may cause engine knocking. Taking the 2019 Lavida as an example, it belongs to the compact car category with body dimensions of 4613mm in length, 1765mm in width, 1460mm in height, a wheelbase of 2610mm, and a curb weight of 1210kg. The 2019 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine producing a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
13
0
Share

What to Do If the Car Master Key Is Lost?

If the car master key is lost, the solutions are: 1. Use the spare key to unlock the car; 2. Re-match the key and replace all the car locks. The functions of the car key include: 1. Closing the windows automatically after turning off the engine; 2. Making it easier to find the car in a parking lot; 3. Automatically opening the trunk; 4. Remotely opening the windows. The maintenance methods for car keys are: 1. Avoid frequently placing them with metal objects; 2. Do not leave the spare key in the car door; 3. Prevent the smart key from falling or being impacted; 4. Avoid exposing the smart key to high temperatures or contact with liquids; 5. Do not place the key with electronic devices.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.