Where is the optimal position for the cold engine oil dipstick?

Does Motorcycle Demerit Points Affect B2 License?

B2 demerit points do not have a significant impact as long as the violations are promptly addressed. However, if 6 points are deducted during the probationary period, the probation period will be extended. Additionally, a B2 driver's license with demerit records requires participation in a review. Below are detailed explanations: Demerit Point Handling: If a motor vehicle driver's demerit points within a scoring cycle do not reach 12, and the imposed fines have been paid, the demerit points will be cleared; if the demerit points do not reach 12 but there are unpaid fines, the demerit points will carry over to the next scoring cycle. 6 Points During Probation: For drivers holding licenses for large buses, tractors, city buses, medium buses, or large trucks, if 6 or more points (but less than 12) are deducted within the one-year probation period, the probation period will be extended by one year. Review: Drivers holding licenses for large buses, tractors, city buses, medium buses, or large trucks must report to the traffic management department of the public security authority for a review within thirty days after the end of each scoring cycle. However, if there are no demerit records within a scoring cycle, the review for that cycle is exempted.

13

2

Share

How to Turn on Left and Right Turn Signals, Up or Down?

Turn the turn signal knob switch to the topmost position to activate the left turn signal. Turn the turn signal knob switch to the middle position to activate the right turn signal. Below are the methods for using the lights: 1. Push up to turn on the right turn signal. 2. Push down to turn on the left turn signal. 3. Pull forward to flash the high beam once. 4. Push backward to keep the high beam on continuously. Here are the precautions for using car lights: 1. Intersections: When a motor vehicle passes through an intersection controlled by traffic signals and turns left, the turn signal should be activated, and the low beam should be used when driving at night. 2. Nighttime: During nighttime when streetlights are on, or when driving under low visibility conditions such as fog, rain, snow, dust, or hail, the headlights, position lights, and rear lights should be turned on. 3. Same direction driving: When a following vehicle is driving close to the vehicle in front in the same direction, the high beam should not be used. 4. Turning: When turning, changing lanes, overtaking, making a U-turn, or pulling over, the turn signal should be activated 100 to 50 meters in advance. 5. Intersections without traffic signals: When a motor vehicle passes through sharp curves, slopes, arched bridges, pedestrian crossings, or intersections without traffic signal control at night, it should alternately flash the high and low beams as a signal. 6. Roads without central barriers or centerlines: When meeting another vehicle at night, switch to the low beam when the oncoming vehicle is more than 150 meters away. Use the low beam when meeting non-motorized vehicles on narrow roads or bridges. 7. Motor vehicle breakdown or accident: If the vehicle is obstructing traffic and difficult to move, the hazard warning lights should be turned on as required, and a warning sign should be placed 50 to 100 meters behind the vehicle. At night, the position lights and rear lights should also be turned on simultaneously.

3

0

Share

Which country produces Chevrolet?

United States. The following is a related introduction to the Chevrolet Malibu: 1. In terms of the braking system: The Malibu adopts front and rear 16-inch disc brakes, paired with a dual-circuit braking system to provide reliable braking assurance. The standard BOS (Brake Override System) automatically switches the engine to idle when it detects the driver attempting to brake, completely preventing situations similar to the "pedal gate." Additionally, the Malibu is equipped with comprehensive active safety electronic devices, including ABS, EBD, ESP+TCS, CBC, BAS, EPB, etc., offering complete active protection to minimize the occurrence of collisions or reduce unavoidable collision energy to the lowest extent. 2. In terms of body design: The Malibu adheres to General Motors' inherent high standards. The body utilizes a BFI integrated body structure, with 73% of the body made of high-strength steel. Ultra-high-strength steel is used in areas such as the A-pillar, B-pillar, sill, and roof, with the highest yield strength reaching 1250 MPa, providing three times the strength of ordinary steel of the same weight. Additionally, the roof employs integrated laser welding technology, increasing the body welding strength by 35% compared to peers, resulting in a robust body structure. 3. In terms of the internal protection system: This is reflected in the airbag system controlled by the SDM (Sensing Diagnostic Module), along with comprehensive protection from headrests and seat belts. In the event of a collision, the two-stage sensing front dual airbags will determine the optimal deployment method based on the SDM's assessment of the collision to maximize the protection of occupants. Side airbags and side curtain airbags provide broader protection than peers, effectively reducing injuries to the chest, abdomen, and pelvis. Meanwhile, the front seat belts feature a two-stage pre-tensioning and force-limiting protection device, which automatically adjusts the seat belt tension based on the accident situation, further reducing passenger injury. When the vehicle's rear is impacted, the occupant's body moves rapidly backward, activating the headrest trigger mechanism, which extends the headrest outward to support the head and reduce the backward tilt distance of the neck, thereby protecting the cervical spine.

19

4

Share

What causes the intermittent malfunction of the central locking system in Wuling Hongguang S?

When the central locking system of a vehicle malfunctions, the owner needs to identify the cause and carry out timely repairs. For the Wuling Hongguang S, the central locking failure may be due to a damaged front door central locking motor, which can be resolved by replacement. The Wuling Hongguang S is positioned as a compact MPV. The standard configurations of the currently available Wuling Hongguang S models are as follows: 1. Braking and Suspension: The front and rear brake types for the Wuling Hongguang S in current sales are disc and drum respectively, with a hand-operated parking brake. The front and rear suspensions are MacPherson independent suspension and solid axle non-independent suspension, featuring a front-engine rear-wheel-drive layout. 2. Other Configurations: Anti-lock braking system (ABS), brake force distribution (EBD), headlight height adjustment, front power windows, front wipers, etc. The Wuling Hongguang S currently available comes with two engine options: 1.2L and 1.5L, paired with a 5-speed manual transmission. The 1.2L engine delivers a maximum output power of 60 kW and a maximum torque of 116 N·m, with a combined fuel consumption of 6.6L/100km as per the MIIT. The 1.5L engine produces a maximum output power of 77 kW and a maximum torque of 140 N·m, with a combined fuel consumption of 6.9L/100km as per the MIIT.

19

4

Share

What Causes the Abnormal Noise When Turning the Steering Wheel to Full Lock?

An abnormal noise when turning the steering wheel to full lock could be due to a faulty plane bearing under the steering wheel. It might also be caused by a loose tie rod end ball joint. During steering, the front suspension system undergoes continuous changes in force, accumulating internal stress. When the steering reaches a certain point, the increased stress causes an instantaneous displacement at the loose ball joint, resulting in vibration and abnormal noise. Here are more details: Continuous friction sound when turning the steering wheel: This noise is likely due to a damaged plane bearing under the steering wheel. The plane bearing, also known as the pressure bearing, is located at the top of the front shock absorber where it connects to the vehicle body. Its function is to allow the shock absorber to rotate with the wheels during steering. If this abnormal noise occurs, it should be inspected and repaired promptly; otherwise, it may eventually prevent the steering wheel from turning. Abnormal noise when the steering wheel is turned to a certain point: This situation is likely caused by a loose tie rod end ball joint. During steering, the front suspension system experiences continuous changes in force, accumulating internal stress. When the steering reaches a certain point, the increased stress causes an instantaneous displacement at the loose ball joint, resulting in vibration and abnormal noise. At low speeds or when stationary, the steering and suspension systems bear the maximum force during steering. When the steering angle increases to a certain point, this stress causes the loose part to slide, generating vibration.

4

0

Share

How Many Questions Are There in the Motorcycle Subject 1 Exam?

Subject 1 exam consists of 100 questions, including true/false questions and single-choice questions, with a full score of 100 and a passing score of 90. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations". The exam content includes the most basic knowledge such as driving theory, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The schedule for the theoretical driving test is arranged by the local vehicle management offices. Exam Process: Follow the instructions of the staff and receive your driving training file in order at the waiting area; Bring and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the exam area; No loud noise is allowed in the exam area; Regulation textbooks are not allowed in the exam area (or should be placed in the bag); After the exam, keep your ID card safe and submit the file to the "File Submission Window" at the front of the exam area; Candidates who pass the exam should sign under the guidance of the staff at the exit of the exam area before leaving; Candidates who fail the exam can leave the exam area and wait for the driving school staff to notify them of the retake time.

20

2

Share

Where is the optimal position for the cold engine oil dipstick?

Does Motorcycle Demerit Points Affect B2 License?

How to Turn on Left and Right Turn Signals, Up or Down?

Which country produces Chevrolet?

What causes the intermittent malfunction of the central locking system in Wuling Hongguang S?

What Causes the Abnormal Noise When Turning the Steering Wheel to Full Lock?

How Many Questions Are There in the Motorcycle Subject 1 Exam?

Can I add engine oil by myself?

What is the tread depth gauge for tires?

What does 'man' mean?

Do I Need to File a Record with the Vehicle Management Office for Modifying Car Lights?