···
Log in / Register

Where is the one-touch window lift for the Roewe RX5?

5 Answers
DiBenjamin
07/29/2025, 10:33 AM

Roewe RX5's one-touch window lift is located on the driver's side door armrest, primarily designed for the driver's convenience in controlling the other windows. The one-touch window lift system allows the car's window glass to be fully raised or lowered with a single press of a button. Cars equipped with this feature have a two-stage window control switch: the first position functions like a regular power window switch, while the second position enables the window to automatically open or close completely with just one press. The Roewe RX5 is a compact SUV with body dimensions of 4556 mm in length, 1855 mm in width, 1719 mm in height, and a wheelbase of 2700 mm.

Was this review help?
14
0
Share
HoldenFitz
08/13/2025, 02:55 AM

I only discovered this hidden feature in my Roewe RX5 after driving it for over two years. You know those four window control buttons on the driver's door armrest, right where your right hand naturally rests? The frontmost button on the driver's control panel with the small triangle symbol - if you press it all the way down until it clicks and hold for two seconds without releasing, the window will automatically roll up completely. The same goes for the other three windows, but pay special attention as the front passenger button is positioned slightly further back. This feature is especially handy during rainy days, saving you from holding the button continuously. Last time when I was picking up my kid from school and it suddenly rained, this function prevented the schoolbag in the backseat from getting wet. Remember to check if all windows are fully closed before locking the car - making it a habit can avoid the embarrassment of forgetting to close windows.

Was this review help?
15
2
Share
Expand All
AlinaLynn
10/10/2025, 11:08 PM

When I first got the new car, it took me quite a while to figure it out by studying the manual. All four power windows of the Roewe RX5 are controlled by the panel on the driver's left side. The key is to apply some force - you need to feel two distinct stages of resistance when pushing the buttons. A light press (first stage) activates manual window operation, while pressing all the way down to trigger the second stage enables one-touch automatic operation. This is actually a very thoughtful design to prevent accidental operation. My wife used to complain that the windows wouldn't close properly, but it turned out she wasn't pressing the buttons firmly enough. Now she can operate all windows with just one finger while taking phone calls, without affecting her left hand's grip on the steering wheel. As a side note, prolonged disuse of this function might cause mechanical stiffness, so it's recommended to manually operate the windows several times each month to maintain smooth functionality.

Was this review help?
19
0
Share
Expand All
MacElle
11/23/2025, 11:14 PM

When I first bought the RX5, the salesperson taught me: locate the control panel in front of the driver's door handle. The main window button is the one closest to the rearview mirror adjustment knob. There's a trick to operating it—don't tap lightly, but quickly press down with your knuckle all the way and release immediately. This triggers the automatic window-up mode. The rear window buttons work the same way, though they're positioned further back, requiring a bit more finger stretch. Once during a road trip, I found this feature particularly useful when paired with the air conditioning's recirculation mode—it allowed me to close all the windows five seconds before entering a tunnel. Over time, the mechanical parts might occasionally become sluggish; spraying some WD-40 into the button gaps usually solves the issue.

Was this review help?
19
5
Share
Expand All
TessaLynn
01/14/2026, 12:46 AM

Having driven three domestic SUVs, the Roewe RX5's power window controls are the most ergonomic. The buttons are positioned right where your thumb naturally rests when your left arm is draped over the door. Four textured square buttons correspond to each window. The key is decisive operation: when raising the window, pull upward firmly to the limit before releasing. The system memorizes this motion to complete automatic closure. The technician mentioned during the first maintenance that it's best to frequently use this function during the first three months to properly break in the motor. Practical tests show it closes windows 3 seconds faster than manual operation during rain, especially useful at traffic lights for quickly blocking exhaust fumes. However, remember to switch to manual mode when wading to prevent potential circuit board short circuits.

Was this review help?
20
2
Share
Expand All
More Forum Discussions

Can National 5 Vehicles Be Registered?

National 5 vehicles can still be registered in regions or cities where the National 6 standard has not been implemented. However, in some areas or cities where the National 6 standard has already been implemented, National 5 vehicles cannot be registered. Below is relevant information about vehicle registration: 1. Before Registration: Registration first requires the vehicle's certificate of conformity. Keep the triplicate invoice for the vehicle purchase, then pay the vehicle purchase tax and obtain the main and auxiliary tax certificates before registering at the vehicle management office. 2. Selecting a License Plate After Approval: After the vehicle passes inspection, you can proceed to choose a license plate. 3. Regulations for Vehicle Registration: If you have obtained a motor vehicle but have not yet registered it and need to drive it temporarily within the administrative region, a temporary license plate valid for no more than 15 days will be issued.
10
2
Share

How to Repair a Broken Fender Liner?

When the fender liner is broken, it needs to be repaired at a professional repair shop, as car owners cannot fix it themselves. The fender, also known as the wing panel, is divided into front and rear fenders based on its installation position. Nowadays, some cars have fenders integrated into the body as a single unit during production. However, some cars have independently assembled fenders, especially the front fenders, as they are more prone to collisions and are easier to replace as a whole. Below are the steps to remove the fender liner: 1. First, use a jack to align with the support points under the car, then lift the chassis and remove the tire. 2. Next, remove the screws and clips securing the fender liner and take out the damaged fender. Of course, clean any mud or debris under the fender. 3. Finally, install the new fender by following the reverse steps of the removal process.
17
0
Share

Where is the Peugeot 508's Cabin Air Filter Located?

The Peugeot 508's cabin air filter is located above the accelerator pedal under the dashboard on the driver's side, hidden at the bottom of the center console. The steps to replace the air filter are: 1. Remove the cover plate in contact with the outside of the right foot; 2. Remove the cover plate below the steering wheel; 3. Open the side cover of the cabin air filter; 4. Take out the cabin air filter for replacement. The Peugeot 508 has a body length, width, and height of 4826mm, 1855mm, and 1465mm respectively, with a wheelbase of 2815mm. The Peugeot 508 is equipped with a 2.0L engine, which has a maximum power of 147PS and a maximum torque of 200Nm, paired with a 5-speed manual transmission.
4
1
Share

What is the part above the bumper called?

The part above the bumper is called the bumper tow hook cover. Opening this cover reveals the towing hook installation point of the vehicle. Below is an introduction about bumpers: 1. Function of the bumper: The bumper is a device designed to absorb and mitigate external impact forces during collisions, providing a cushioning effect to protect both the vehicle and its occupants. 2. Plastic bumpers: They are designed to harmonize with the vehicle's body shape and achieve lightweight construction. Plastic bumpers consist of three parts: the outer panel, buffer material, and crossbeam. 3. Role of plastic bumpers: Plastic bumpers offer strength, rigidity, and decorative appeal. From a safety perspective, they provide a cushioning effect during collisions, protecting the front and rear body of the vehicle. Aesthetically, they integrate seamlessly with the vehicle body, forming a unified appearance and serving as an important decorative component of the vehicle's exterior.
15
2
Share

How to Replace the Battery in a Cadillac Key Fob?

Steps to replace the battery in a Cadillac key fob: 1. Remove the mechanical key to reveal the seam on the plastic casing; 2. Use a tool to gently pry along the edge until the gap is wide enough to open the key cover; 3. Note the orientation of the battery's positive and negative terminals and remember it, then remove the old battery and replace it; 4. Close the key cover, ensuring proper alignment to avoid damaging the internal circuitry during reassembly. Below is some related information about Cadillac: 1. Cadillac is a mid-to-large-size sedan with dimensions of 5103 mm in length, 1852 mm in width, and 1502 mm in height, and a wheelbase of 2837 mm. 2. Cadillac is equipped with a turbocharged engine that delivers a maximum power output of 198 kW, a maximum torque of 353 Nm, and a maximum horsepower of 269.
11
2
Share

What Causes the Slight Fluctuation of the Needle During Car Idling?

The slight fluctuation of the needle during car idling is caused by: 1. Oil stains or carbon deposits on the throttle valve, oil stains or carbon deposits around the intake tract of the throttle valve, oil stains or carbon deposits on the idle stepper motor, duty cycle solenoid valve, or rotary solenoid valve; 2. Damage or sticking of the throttle valve motor, idle stepper motor, duty cycle solenoid valve, or rotary solenoid valve; 3. Faults in the air flow meter or its circuit, faults in the intake pressure sensor or its circuit, poor contact due to water ingress in the engine control unit connector, or internal faults in the computer. The solution to the slight fluctuation of the needle during car idling is to clean the intake pipe and fuel injector to ensure smooth fuel injection, thorough engine combustion, and stable operation.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.