Where is the onboard computer of the X-Trail located?

1 Answers
DeTravis
07/30/25 4:03am
The body computer of the X-Trail is located in the heat shield near the cabin in the engine compartment. Function of the onboard computer: The onboard computer is a specialized tool developed for the unique operating environment and electrical circuit characteristics of automobiles. It is a dedicated automotive information product with features such as high-temperature resistance, dust resistance, shock resistance, and integration with the vehicle's electronic circuits. The onboard computer is generally used to calculate instantaneous fuel consumption, driving distance, temperature, average speed, average fuel consumption, etc. Some models also include functions like maintenance reminders and driver rest alerts. Cars equipped with onboard computers: Not all fuel-injected vehicles have an onboard computer. Many modern cars come with an onboard computer, though some may have limited functionality. Most modern cars are fuel-injected, and even older carburetor-equipped high-end models may have an onboard computer. Typically, the onboard computer is located on the dashboard or center console with a small screen to display information.
Was this review help?
5
3
Share
More Forum Discussions

What is Semi-Synthetic Engine Oil?

Semi-synthetic engine oil is a lubricant formulated from Group III base oils, which is a purified product derived from mineral oil through hydrocracking technology. Specifically, it is made by blending mineral oil and fully synthetic oil in a 4:6 ratio, with the addition of certain additives. Here are some relevant details: 1. Semi-synthetic engine oil is generally suitable for mid-to-low-end naturally aspirated engine models. As long as it's not for turbocharged engines or high-end, large SUV models, semi-synthetic oil can be used. 2. The replacement cycle for semi-synthetic oil is approximately 8 months, typically around 7,000 kilometers. There is no fixed interval for oil changes; it depends on the actual driving environment and habits. In harsher driving conditions, an earlier replacement is necessary, and the type of oil used should also refer to the recommendations in the vehicle's maintenance manual.
20
2
Share

How many types of engines are used in the BMW 7 Series?

The BMW 7 Series uses 4 types of engines, which are: 1. A 2.0-liter turbocharged engine with a maximum torque of 400 Nm and a maximum power speed of 5000 to 6500 rpm; 2. A 3.0-liter turbocharged engine with a maximum torque of 450 Nm and a maximum power speed of 5500 to 6500 rpm; 3. A 4.4-liter twin-turbocharged engine with a maximum torque of 750 Nm and a maximum power speed of 5500 to 6000 rpm; 4. A 6.6-liter twin-turbocharged engine with a maximum torque of 1850 Nm and a maximum power speed of 5250 to 5750 rpm. The BMW 7 Series is BMW's flagship sedan, with dimensions of 5212mm in length, 1902mm in width, 1478mm in height, and a wheelbase of 3210mm.
17
5
Share

What does tire aspect ratio mean?

The aspect ratio of a car tire refers to the percentage of the tire's sidewall height to its width. A smaller value indicates a flatter tire shape, while a relatively larger value makes the tire appear bulkier. More details are as follows: 1. Reasons for increasing tire width: To ensure sufficient load-bearing capacity and improve driving stability and grip, the width of tires and rims has to be continuously increased. As a result, the cross-sectional shape of tires has evolved from an approximately circular form to a flatter elliptical shape. However, with the increase in vehicle speed, the diameter of tires has been continuously reduced to lower the center of gravity and axis of the car. The lower the tire aspect ratio, the smoother the tire runs and the stronger the handling performance. 2. Passenger cars generally use radial tires: The specifications of radial tires include width, aspect ratio, inner diameter, and speed limit symbols. For example, a tire specification of 205/65R15 means the width between the two sidewalls of the tire is 205 millimeters, 65 represents the aspect ratio, "R" stands for radial tire, and 15 is the inner diameter of the tire, which is 15 inches. Some tires also have speed limit symbols marked with letters such as P, R, S, T, H, V, Z, representing various speed limit values.
10
0
Share

How to Regain a Driver's License After It's Revoked for Speeding Over 50%?

After a driver's license is revoked for speeding over 50%, you can reapply for a driver's license two years later, following the same procedures as a beginner. The circumstances under which a driver's license may be revoked are as follows: 1. If you are caught driving under the influence of alcohol twice within one year and penalized more than twice, your driver's license will be revoked, and you will not be allowed to drive commercial vehicles for five years. 2. Allowing someone without a driver's license, or whose license is revoked or suspended, to drive your vehicle; or driving a vehicle at a speed exceeding 50% over the limit. 3. Being involved in a major traffic accident due to a violation, which constitutes a crime, leading to criminal liability and revocation of the driver's license by the traffic management department of the public security authority. 4. Fleeing the scene after causing a traffic accident will result in the revocation of your driver's license by the traffic management department of the public security authority, with a lifetime ban on reapplying for a driver's license.
13
5
Share

How to Control the Clutch for Speed in Subject 2?

Subject 2 clutch control speed techniques: 1. When pressing the clutch, step on it quickly and release it slowly. Use the ball of your foot on the pedal to avoid slipping. 2. On uneven road surfaces, you can lightly apply the brake to control speed, but the brake should be pressed gently, gradually increasing pressure. Avoid sudden braking. 3. Whether starting on flat ground or a slope, accurately sense the clutch's semi-engaged state. Develop the habit of slowly lifting the clutch to semi-engagement first, then releasing the brake until the car starts moving slowly. 4. When stopping, press the clutch first, then the brake. After shifting to neutral, you can release the clutch before releasing the brake. Reasons for poor speed control: 1. Nervousness while driving, which can lead to suddenly releasing or pressing the clutch too hard. 2. Incorrect way of pressing the clutch pedal. 3. Over-reliance on the instructor's commands during practice, lacking independence. 4. Wearing inappropriate shoes that prevent you from feeling the clutch pedal's position.
3
3
Share

Disconnecting the Positive or Negative Terminal of a Car Battery?

Turn off the ignition, first disconnect the negative terminal, then the positive terminal; when installing, connect the positive terminal first, then the negative terminal. When jump-starting a dead battery, first connect the positive terminal, then the negative terminal; after starting, first loosen the negative terminal, then the positive terminal cable. A lead-acid battery operates on the principle of a primary cell when discharging, but it is not entirely the same as a primary cell. The positive terminal of the battery participates in the reaction, which can prevent the release of hydrogen gas at the positive terminal during discharge. The functions of a battery include: 1. Providing a strong starting current (around 10A) to the starter when starting the engine. 2. Assisting the generator in supplying power to electrical devices when the generator is overloaded. 3. Supplying power to electrical devices when the engine is idling. 4. Acting as a large-capacity capacitor to protect the car's electrical appliances. 5. Converting part of the electrical energy into chemical energy for storage when the generator's voltage is higher than the electromotive force of the lead-acid battery, which is essentially charging.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.