···
Log in / Register

Where is the oil filter of Geely Boyue located?

6Answers
JayceLynn
09/02/2025, 12:00:41 AM

The oil filter of Geely Boyue is located at the upper right front of the engine, which can be seen after opening the engine hood. The steps to replace the oil filter are: 1. After turning off and cooling the vehicle, open the engine compartment hood and unscrew the engine oil filler cap; 2. Lift the vehicle and unscrew the oil drain plug at the bottom of the engine oil pan; 3. Use an oil bucket to collect the waste oil, and after draining, let it sit for ten minutes before tightening the drain plug; 4. Lower the vehicle, remove the oil filter with tools, and replace it with a new one. Geely Boyue is a compact SUV launched by Geely, with body dimensions of: length 4519 mm, width 1831 mm, height 1694 mm, and a wheelbase of 2670 mm.

Was this review help?
109
Share
DallasAnn
09/14/2025, 02:13:20 AM

Oh, I've been driving a Geely Boyue for several years now. The oil filter location is pretty standard - it's under the engine oil pan, near the front passenger side. During routine maintenance when changing the oil, you'll need to address it simultaneously. First, you'll have to elevate the car on level ground and remove the underbody protection panel to access it. The position isn't particularly hidden, but it might take some effort to locate the first time. When I change it myself, I always use an oil filter wrench to remove the old one. Before installing the new filter, applying some oil on the sealing ring helps prevent leaks. For safety, it's best to do this when the engine is cold to avoid burning your hands. Replacing it regularly every 5,000 km or every six months can extend engine life. If you're inexperienced, it's perfectly fine to have it done at an auto repair shop - saves you from crawling under the car and getting covered in oil. Once you've located the correct position, maintenance becomes much smoother.

Was this review help?
10
Share
Expand All
McRemington
10/28/2025, 02:56:38 AM

The oil filter of the Geely Boyue is located at the lower left front of the engine compartment, specifically near the oil pan. I often change the oil myself, and the position is not difficult to locate, but you need to remove the bottom cover to access it. The tools required are just an oil filter wrench and a drain pan. Remember to stabilize the car before changing to ensure safety. DIY oil changes can save on maintenance costs, but beginners are advised to watch tutorial videos first to avoid overtightening or missing parts. After confirming the position, drain the old oil before removing the filter—don’t mix up the order. Check the new filter’s seal for integrity before installation, and tighten it with moderate torque—too tight can cause it to seize. Performing this maintenance quarterly helps prevent engine carbon buildup. Once you get into the habit, the process becomes very smooth.

Was this review help?
18
Share
Expand All
GabrielleLynn
12/11/2025, 02:12:31 AM

My Geely Boyue is three years old, and the oil filter is located in the front lower chassis area of the engine, near the left side of the oil pan. I don't drive much daily, but I always pay attention to this point during every 5,000-kilometer maintenance. Replacing it is quite simple—just open the protective cover, and you can see it. However, doing it yourself requires tools and lying underneath the car. Its location is crucial because it filters out impurities to protect the engine, and failing to replace it on time may cause component wear. It's recommended to have it handled at a 4S shop or repair center—professional, efficient, and hassle-free.

Was this review help?
11
Share
Expand All
LunaFitz
01/31/2026, 03:17:35 AM

The oil filter is located at the front bottom of the Geely Boyue engine, usually covered by a metal guard plate. When replacing, first remove the plate—I emphasize safety first: lift and secure the vehicle to prevent slipping. After confirming the position, carefully unscrew the old filter to avoid spilling old oil. When installing the new one, don’t overtighten; use appropriate torque to prevent leaks or damage. The position isn’t complex, but incorrect operation may lead to increased fuel consumption or engine noise. Remember to replace it every six months along with the oil change to ensure filter efficiency. With a clear position, regular maintenance saves money and ensures peace of mind.

Was this review help?
20
Share
Expand All
DiAaron
04/26/2026, 01:54:39 PM

The oil filter of the Geely Boyue is located under the engine chassis, slightly to the left near the front wheel area. I often change it myself—positioning isn't difficult, but you need to lie down to operate. Prepare tools like a wrench and a pan before starting. Once located, loosen the old filter. Be careful not to touch hot components to avoid burns. When installing the new filter, apply a thin layer of oil on the edge for a good seal and ensure it's installed correctly the first time. Its location is crucial for engine health, and replacing it every 5,000 kilometers extends the car's lifespan. Also, check if any chassis bolts are loose for comprehensive maintenance. DIY saves costs, but knowing the exact location is key.

Was this review help?
12
Share
Expand All
More Q&A

Which Vehicle Models Are Eligible for 6-Year Exemption from Inspection?

Vehicles eligible for exemption from inspection include non-commercial passenger cars and other small or mini passenger vehicles within 6 years, excluding vans and vehicles with 7 or more seats. Below is an introduction to the exemption: 1. Vehicle Inspection Exemption: This means the vehicle is exempt from on-site inspection, but verification of compulsory traffic insurance payment and traffic violation handling must still be conducted regularly at the vehicle management department. 2. Exemption Policy: Privately-owned small cars registered on or after September 1, 2010, are eligible for this exemption policy. Below is extended information about vehicles not eligible for exemption: 1. Exemption Scope: Vehicles with 7 or more seats are not eligible for exemption; vehicles involved in accidents are not eligible for the 6-year exemption. 2. Exemption Policy: New vehicles within the scope that have been involved in accidents causing casualties are not eligible for exemption. 3. Exemption Policy: Vehicles that remain unregistered for a long time are also not eligible for exemption, meaning vehicles that have not completed registration procedures within 4 years from the manufacturing date are not eligible. Taxis, training vehicles, and other commercial vehicles still require annual inspection as per original requirements.
111
Share

What does WDR on a dash cam mean?

WDR on a dash cam refers to Wide Dynamic Range mode. When the dash cam is in this mode, it can capture a wider viewing angle and also record darker areas. Additional information: 1. About WDR technology: WDR stands for Wide Dynamic Range. In this mode, the image can distinguish between the brightest and darkest light signal values, allowing clear visibility in both very bright and very dark environments. Generally, WDR technology is used in photography to enhance image quality and resolution. 2. Portable dash cams: Portable dash cams are divided into rearview mirror dash cams and data dash cams. These devices are known for their good concealment, easy installation, detachability, and simplicity of use. Most built-in DVD dash cams are vehicle-specific and can be classified as front-mounted or rear-mounted. Installing these types of dash cams is relatively more challenging.
104
Share

What Does Vehicle Safety Inspection Include?

Here is the relevant introduction to vehicle safety inspection content: 1. Exterior: The vehicle's exterior should be clean and free of scratches or damage. The interior should be tidy and well-organized. Doors, rearview mirrors, windshield wipers, and all parts and accessories should be intact, securely fastened, without any defects, and maintain normal technical performance. Required documents, tools, spare tires, and warning signs should all be complete. 2. Lights: All vehicle lights should function properly, be securely installed, and not loosen, get damaged, or lose functionality or change lighting direction due to vehicle vibration. Bulbs should be in good condition without burnout. Light switches should operate smoothly, dashboard indicator lights should function correctly, allowing clear visibility of all dashboard instruments without causing glare. 3. Instruments: Vehicle instruments such as the water temperature gauge, ammeter, fuel gauge, idle speed gauge, speedometer/odometer, and oil pressure gauge should function normally. 4. Engine: The engine should have good power performance, operate smoothly with stable idle speed, and maintain normal oil pressure. The engine should have good starting performance, and the ignition system, fuel system, lubrication system, and cooling system should all function well.
101
Share

Can motorcycle penalty points be deducted from a C1 license?

No. Motorcycles require an E-class license, while cars require a C1 license. When handling traffic violations, they cannot be used interchangeably or processed together. The correct license must be used. Motorcycle penalty point standards: 1. Failure to wear a safety helmet as required: When driving a motorcycle, if the driver or passenger fails to wear a safety helmet as required, 2 points will be deducted and a fine of 200 yuan will be imposed. 2. Running a red light: If a motor vehicle fails to comply with traffic signal regulations (running a red light), 3 points will be deducted and a fine of 200 yuan will be imposed. 3. Driving in the opposite direction: If a motor vehicle is driven in the opposite direction, 3 points will be deducted and a fine of 200 yuan will be imposed. 4. Violating prohibition signs: If a motor vehicle violates prohibition sign instructions, 3 points will be deducted and a fine of 200 yuan will be imposed.
113
Share

What does third-party liability insurance mean?

Third-party commercial liability insurance refers to the financial responsibility that the insured or their legally permitted drivers must bear for accidental incidents occurring during the use of the insured vehicle, which cause personal injury, death, or direct property damage to a third party. The insurance company is responsible for compensation. Additional details are as follows: 1. Third-party liability insurance: Since the introduction of compulsory traffic insurance, third-party liability insurance has become a non-mandatory insurance that can serve as a supplement to compulsory traffic insurance. In an insurance contract, the insurer is the first party, also known as the first party; the insured or the person causing the harm is the second party, also known as the second party; apart from the insurer and the insured, the victim who suffers personal injury or property loss due to an accident involving the insured vehicle is the third party, also known as the third party. 2. Third-party commercial liability insurance: Also known as third-party liability insurance, most local governments previously listed it as a compulsory insurance. Without purchasing this insurance, motor vehicles could not be registered or undergo annual inspections. After the introduction of compulsory motor vehicle traffic insurance (referred to as compulsory traffic insurance), third-party liability insurance has become a non-mandatory insurance. Because compulsory traffic insurance provides relatively low compensation for third-party property losses and medical expenses, purchasing third-party liability insurance can be considered as a supplement to compulsory traffic insurance.
105
Share

How to Add Brake Fluid to a Car?

To add brake fluid to a car: Open the car hood, locate the brake fluid reservoir, and open its cap to add the fluid. Brake fluid, also known as hydraulic brake fluid, is transmitted by the master cylinder to the wheel cylinders during braking. The wheel cylinders then press the brake pads against the brake discs under hydraulic pressure, bringing the car to a stop. The volume of brake fluid changes with temperature, and moisture can enter through the reservoir's vent, dissolving into the fluid and lowering its boiling point. When adding brake fluid, strictly use the type and specification specified by the manufacturer to avoid altering the fluid's performance and damaging the braking components.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.