Where is the oil filter of Dongfeng AX7 located?

What is the difference between China 5 and China 6 vehicles?

The differences between China 5 and China 6 emission standards are as follows: Different emission standards: China 6 emission standards are more than 30% stricter than China 5. Excluding the influence of working conditions and testing, gasoline vehicles reduce carbon monoxide emissions by 50%, total hydrocarbons and non-methane hydrocarbons by 50%, and nitrogen oxide emissions by 42%. Different implementation times: The China 5 standard was implemented nationwide on January 1, 2017. China 6 has been implemented since July 1, 2019. Different principles: In the China 5 stage, diesel and gasoline vehicles had different emission standards, but China 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. Different issuing departments: The China 5 standard was issued by the Ministry of Environmental Protection, while the China 6 standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection and Quarantine. Different letter representations: China 5 is represented by "V," while China 6 is represented by "VI." Different monitoring requirements for plug-in hybrid vehicles: Compared to China 5, China 6 has improved monitoring requirements for plug-in hybrid vehicles, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulations. China 5 standard limits are as follows: Gasoline vehicles must not emit more than 1,000 mg of carbon monoxide per kilometer driven. They must not emit more than 68 mg of non-methane hydrocarbons, 60 mg of nitrogen oxides, or 4.5 mg of PM (particulate matter) per kilometer driven. China 6 has two standards: China 6a and China 6b. Their limits are as follows: China 6a standard limits: Gasoline vehicles must not emit more than 700 mg of carbon monoxide per kilometer driven. They must not emit more than 68 mg of non-methane hydrocarbons, 60 mg of nitrogen oxides, or 4.5 mg of PM per kilometer driven. China 6b standard limits: Gasoline vehicles must not emit more than 500 mg of carbon monoxide per kilometer driven. They must not emit more than 35 mg of non-methane hydrocarbons, 35 mg of nitrogen oxides, or 3 mg of PM per kilometer driven. Affected by the China 6 emission policy, although China 5 vehicles can still be used normally without restrictions on driving or licensing, their resale value will be significantly impacted. For car owners, if they purchase a truck for freight transport on loan, the depreciation of the vehicle after repaying the loan is equivalent to the net profit earned during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China 6 vehicles, with longer service life and more road privileges, have greater advantages.

9

5

Share

What Does Basic Maintenance Include?

Replacing the air filter, engine oil, oil filter, cabin air filter, and checking fluids, performance, tires, and lights are the main components of basic maintenance. Below is a detailed introduction: Replacing the air filter: The air filter, also known as the intake filter, is used to filter the air entering the engine, including moisture and particulate impurities in the air. It has a specific maintenance cycle and should be replaced on time to ensure optimal filtration performance. Replacing the engine oil: Engine oil provides lubrication for the engine and has a defined maintenance interval. Once the interval is reached, the oil should be replaced to maintain its performance and ensure proper lubrication. Typically, the maintenance cycle for engine oil is 5,000 km or 6 months, or 10,000 km or 12 months, whichever comes first. Replacing the oil filter: The oil filter, also called the oil cleaner, is used to remove impurities from the engine oil and maintain its quality. Over time, the filter's performance degrades, so it should be replaced along with the engine oil. Replacing the cabin air filter: The cabin air filter is used to purify the air inside the car or the air entering from outside (some models also have an external cabin air filter), ensuring a relatively clean cabin environment and better air quality. Fluid checks include: windshield washer fluid, coolant, and brake fluid. Performance checks include: brake performance, battery condition, and bolt tightness. Tire checks include: tire pressure, tread wear, and balance. Light checks include: functionality of headlights (high and low beams), turn signals, fog lights, and brake lights. The purpose of vehicle maintenance is to keep the car in good technical condition. Maintenance ensures efficient, low-consumption, safe, and low-emission operation, while also reducing malfunctions and extending the vehicle's lifespan. Regular maintenance plays a crucial role in maintaining the vehicle's optimal performance.

16

0

Share

What is the ground clearance of the Jetta VS5?

The official data shows that the minimum ground clearance of the Jetta VS5 is 155mm. For an SUV, this minimum ground clearance is relatively low. The ground clearance of a car is not fixed and depends on the load condition. Here is an introduction to the configuration of the Jetta VS5: 1. Safety features: Front passenger airbags, tire pressure monitoring, seat belt reminder, ABS anti-lock braking system, brake force distribution, brake assist, traction control, and electronic stability program. 2. Assist features: Rear parking sensors, cruise control, engine start-stop, hill start assist, roof rails, engine immobilizer, central locking, one-touch power windows, and anti-pinch window function.

14

2

Share

What to Do When the Dashboard Shows Transmission Fault Code P1829

The dashboard showing transmission fault code P1829 can be diagnosed as a shift solenoid open or short circuit fault, commonly known as a mechatronic control unit failure. Generally, the mechatronic control unit needs to be replaced, followed by specialized decoding, refreshing, matching, and reprogramming. Randomly removing the battery negative terminal to clear the fault code can cause the following two issues: 1. It may cause the control computer of certain vehicle models to lose 'experience memory'. After disconnecting the battery negative terminal, the engine operation data stored in RAM (random access memory) will be automatically cleared, leading to poor vehicle performance for a considerable period after repair. 2. It may result in the loss of normal functions.

8

1

Share

What is the function of cruise control?

The function of cruise control is that once the car is set to cruise mode, the fuel supply of the engine is controlled by the computer. The computer continuously adjusts the fuel supply based on road conditions and the driving resistance of the car, maintaining the vehicle at the set speed without the need to operate the throttle. Below is a related introduction about cruise control: It is an electronic control device that automatically regulates the driving speed of the car using electronic control technology. It has the advantages of maintaining stable driving speed, improving driving comfort, and enhancing fuel economy and environmental friendliness. The cruise control area is generally located behind the steering wheel or integrated into the multifunction steering wheel.

19

0

Share

What is the BMW FEM module?

BMW FEM module is the Front Electronic Module, usually installed in the center console below the steering wheel and connected to the vehicle via 9 plugs. To avoid confusion during connection, plugs with the same color housing have different coding to prevent incorrect insertion due to negligence. A 1-pin plug connection serves as the power input for the FEM. More details about the BMW FEM module are as follows: 1. With the introduction of the Front Electronic Module, previous control units and their functions have been replaced by a new generation of products. Due to the modular principle, the Front Electronic Module can be installed accordingly in all model series. 2. The Front Electronic Module assumes functions from the old control units—footwell module, Comfort Access and Start System, junction box electronics, and Central Gateway Module. 3. The Central Gateway Module is installed as an independent control unit within the Front Electronic Module. Its purpose is to reduce control units and optimize component networking. The optimization of wiring harnesses also reduces the physical capacity of the bus.

3

1

Share

Where is the oil filter of Dongfeng AX7 located?

What is the difference between China 5 and China 6 vehicles?

What Does Basic Maintenance Include?

What is the ground clearance of the Jetta VS5?

What to Do When the Dashboard Shows Transmission Fault Code P1829

What is the function of cruise control?

What is the BMW FEM module?

How to Open the Hood of a Jeep Compass?

What are the effects of installing tires backwards?

What is the emission standard for the 7th-generation Camry?

What type of transmission does the ix35 have?