···
Log in / Register

Where is the oil filter located on the Peugeot 4008?

3 Answers
McJoshua
07/29/25 11:50pm
The oil filter is located at the lower front of the engine block. Here are detailed explanations about the oil filter: 1. The oil filter, also known as the oil cleaner, functions to remove impurities, gums, and moisture from the engine oil, delivering clean oil to various lubrication points. 2. To reduce friction between moving parts in the engine and minimize wear, oil is continuously circulated to the friction surfaces of moving components, forming a lubricating film. 3. Engine oil inherently contains certain amounts of gums, impurities, moisture, and additives. During engine operation, the introduction of metal particles, airborne contaminants, and the formation of oil oxidation products gradually increase the impurities in the oil. 4. If the oil is not filtered before entering the lubrication circuit, the impurities it carries will reach the friction surfaces of moving parts, accelerating wear and shortening the engine's service life.
Was this review help?
2
1
Share
OMolly
08/16/25 3:18am
The oil filter of the Peugeot 4008 is located at the front bottom of the engine compartment, typically in the lower area near the left front wheel. When you open the hood and look down, you'll see a small cylinder connected to the oil system, specifically above or on the side of the oil pan. This design is reasonable for easy maintenance, but when replacing the filter, ensure the car is parked stably and cooled down for a while to avoid burns. As a car enthusiast, I recommend preparing a specialized wrench and gloves before attempting the task yourself, as the location tends to accumulate dust and dirt. Be gentle when twisting the filter to prevent damaging the seal and causing oil leaks. The entire process is straightforward and takes about 20 minutes, but beginners should seek guidance from a friend or refer to a video to avoid mistakes. Regularly checking the seal position can protect the engine's lifespan and reduce the risk of major repairs.
Was this review help?
7
0
Share
Expand All
LeReid
10/19/25 4:25am
My Peugeot 4008 has been running for over a year, and I've changed the oil filter twice without any issues. It's located underneath the engine at the front of the car, in the area near the inner side of the left wheel. When you open the hood and look down, you can spot that small metal canister attached to the engine. The first time I changed it, I was all over the place, lying on the ground searching for a while before finally finding it. The placement isn't too hard to locate, but the corner tends to accumulate oil and dirt. Doing the oil filter change myself saved me around a hundred bucks, but I had to prepare the right tools and old clothes to avoid getting dirty. Experience tells me that the filter's hidden position offers good protection, reducing the risk of being hit by stones. Now, during every maintenance session, I make sure to clean that area thoroughly to ensure smooth lubrication.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

What does D321 in automatic transmission mean?

Automatic transmission D1, D2, D3 are the low-gear modes of the transmission. Automatic D1 is similar to gears 1 and 2 in a manual transmission; automatic D2 is similar to gears 3 and 4 in a manual transmission; automatic D3 is similar to gears 5 and 6 in a manual transmission. Automatic D1 has the largest gear ratio and the strongest torque output, suitable for climbing steep slopes or towing other vehicles; automatic D2 has a reduced gear ratio and torque output, also suitable for climbing or towing; automatic D3 has moderate torque and power output capability, allowing direct engagement while driving to downshift for higher torque output when overtaking, with no noticeable jerk and faster throttle response. The function of the gear limiter in a car is to lock the vehicle in a fixed forward gear without upshifting or downshifting, preventing the transmission from jumping to a higher gear.
12
2
Share

How to Check the Car Air Conditioning Controller?

The method to check the car air conditioning controller is: 1. First, check whether the refrigerant is sufficient. 2. View the usage status of the refrigerant through the glass observation hole on the liquid storage dryer in the engine compartment. 3. If a large number of bubbles appear in the observation hole after the air conditioning is started, it means the refrigerant is insufficient. Extended content: 1. The car air conditioning device, referred to as car air conditioning, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to the optimal state. It provides a comfortable riding environment for passengers, reduces travel fatigue, creates good working conditions for the driver, and plays an important role in ensuring safe driving. 2. It generally includes a refrigeration device, heating device, and ventilation device. This combined device makes full use of the limited space inside the car, with a simple structure and easy operation.
4
5
Share

Reasons for occasional popping sound in Kawasaki Z650 engine?

Reasons for occasional popping sound in Kawasaki Z650 engine: Excessive valve clearance causing abnormal noise; Excessive clearance between connecting rod small end and piston pin; Damaged crankshaft bearing (replace at repair shop); Other transmission faults or loose screws leading to poor component connections. An engine is a machine that converts other forms of energy into mechanical energy, applicable both as power generation devices or complete machines including power units, with types including internal combustion engines, external combustion engines, gas turbines, electric motors, etc. When valve clearance exceeds permissible values during cold engine conditions, thermal expansion will produce ticking sounds. Therefore, when hearing valve ticking sounds, avoid making arbitrary adjustments based on personal experience. It's best to take the motorcycle to professional repair shops to prevent accidents during DIY repairs that might cause greater damage to the motorcycle, potentially leading to safety risks and issues during operation.
5
2
Share

When Can You Wash the Car After Painting?

After painting, the appropriate time to wash the car depends to some extent on the painting technique and the type of paint used. Conventional car paint typically requires nearly a week before washing is allowed, but with rapid repair technology, the car can be washed even polished just one hour after leaving the workshop. The specific time and type for washing are as follows: 1. If the paint is applied in a paint booth, the car can be washed immediately after being driven out, as it has already stayed in the booth for 3 to 4 hours. 2. If the painting is done at a professional shop, the car can be washed when the staff delivers it. 3. If the car is painted and picked up on the same day, it should wait for 2 days before washing. 4. If painting is done at lower temperatures, the car should wait for a week before washing.
2
4
Share

What Does Pedestrian Protection System Malfunction Mean?

Pedestrian protection system is designed to automatically pop up the hood when the vehicle collides with a pedestrian. A pedestrian protection system malfunction indicates that the hood fails to issue a warning when the vehicle hits a pedestrian. Method to reset the pedestrian protection device warning light: First, start the engine; Press and hold the "TRIP" button without releasing until the mileage and "OIL-LIFE" start flashing, then release the button; Sometimes it may require pressing and releasing the button several times to clear the pedestrian protection device warning light. For the most basic pedestrian protection technology, it mainly involves the application of energy-absorbing materials on the vehicle body, such as energy-absorbing bumpers, soft hood materials, and headlights and accessories without sharp edges. Among these, adopting a buffering structure design on the engine hood section is a relatively common practice among domestic automobile manufacturers.
5
4
Share

What are the reasons for being unable to open the car door after unlocking?

The main reasons for being unable to open the car door after unlocking are either a faulty exterior door handle cable or a malfunctioning door lock mechanism. Below are some introductions about remote keys: The working methods of remote keys can be divided into three categories based on their usage: active working mode, passive working mode, and coil induction mode. Extended content: 1. The car will compare the received signal with the information stored internally. If the verification is successful, the car will unlock the door. Once the driver enters the car, simply pressing the start button will start the car engine. 2. When the button is triggered, the PKE system first needs to detect whether the "key" device is inside the car, and then complete the same authentication process before starting the engine. When the driver leaves the car, simply pressing the door handle will lock the car door. Before the car is actually locked, it will also detect the driver's position and go through the same verification process.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.