Where is the oil filter located on the Peugeot 4008?

1 Answers
AlinaLee
07/29/25 7:56pm
The oil filter of the Peugeot 4008 is located at the top front of the engine and beneath the engine. Here is more information about the oil filter: 1. The main function of the filter is to remove impurities from the engine oil, which can cause blockages over time. 2. The oil filter is one of the vehicle's wear parts and needs to be replaced every time the engine oil is changed. If the oil filter is not replaced, the effect of changing the oil is minimal. 3. The oil filter is part of the engine lubrication system, where it filters out harmful impurities from the oil in the oil pan and supplies clean oil to other components.
Was this review help?
2
4
Share
More Forum Discussions

What is the purpose of the LOR button in a car?

The LOR button on the car door is the electric rearview mirror adjustment switch knob. Here is the relevant information: 1. Function: The car rearview mirror reflects the situation behind, beside, and below the car, allowing the driver to indirectly see these positions clearly and expanding the driver's field of vision. 2. Classification: Divided by purpose, the exterior rearview mirror reflects the rear side of the car, the lower rearview mirror reflects the front lower part of the car, and the interior rearview mirror reflects the rear of the car and the interior situation. Different purposes result in different mirror structures. Generally, there are two main types of rearview mirror surfaces: one is a flat mirror, which, as the name suggests, has a flat surface and can provide an image of the same size as the naked eye sees. This type of flat mirror is commonly used as an interior rearview mirror. The other is a convex mirror, which has a spherical surface. Its image is smaller than what the naked eye sees, but it has a larger field of vision. This type of convex mirror is commonly used as an exterior rearview mirror and a lower rearview mirror.
1
0
Share

What is the tire size of the Nissan X-Trail 2.5 4WD?

The tire size for the Nissan X-Trail 2.5 4WD is 17 inches. The X-Trail offers three tire specifications: 225/65R17, 225/60R18, and 225/55R19. The tire specification parameters are marked on both sides of the outer tire, including the production number, manufacturer's trademark, size specifications, ply rating, maximum load and corresponding pressure, carcass ply material code in Chinese Pinyin, installation requirements, and directional markings. Daily attention should be paid to tire pressure. Pressure is the lifeblood of a tire; both excessive and insufficient pressure can shorten its lifespan. Insufficient pressure increases tire body deformation, leading to cracks on the sidewalls and generating flexing movements that cause excessive heat, accelerating rubber aging, ply fatigue, and cord breakage. It also increases the tire's contact area, accelerating shoulder wear. Excessive pressure overstretches the tire cords, reducing the tire body's elasticity and increasing the load on the vehicle during driving. Impacts may cause internal cracks and blowouts, while also accelerating tread wear and reducing puncture resistance.
5
4
Share

How to Drive a Manual Transmission Car More Fuel-Efficiently?

Driving a manual transmission car fuel-efficiently can be achieved through the following methods: 1. Warm up the car before driving: In winter, warm up the car for one to three minutes before setting off, allowing the water temperature to reach 40°C before starting. Then drive steadily for 1 to 2 kilometers before accelerating. This reduces fuel consumption and is also beneficial for the engine and car components. 2. Gently release the accelerator: Gently releasing the accelerator can save fuel. If the accelerator is released abruptly, the engine speed will suddenly drop, creating a drag effect that offsets part of the driving inertia, causing the car to shake and increasing fuel consumption. 3. Maintain a safe following distance: If the road is congested and the car ahead frequently brakes, keep a sufficient distance from it. This allows for smooth deceleration and reduces the number of braking instances, thereby saving fuel.
17
1
Share

What is the speeding standard?

Highway speeding penalties are determined based on the extent of the speeding. Below are the standards for highway speeding penalties: 1. Introduction: Speeding refers to the situation where the driver's vehicle speed exceeds the legal or regulatory speed limit while driving. Turbine overspeed accidents are serious malfunctions caused by faults in the turbine's speed regulation and protection systems, as well as inherent defects. 2. Regulations: According to the "Road Traffic Safety Law": If the vehicle speed exceeds the limit by less than 10%, the driver will be given a warning. If the vehicle speed exceeds the road speed limit by more than 10% but less than 20%, a fine will be imposed, and 3 points will be deducted from the driver's license. If the speed exceeds the road speed limit by more than 20% but less than 50%, a fine will be imposed, and 6 points will be deducted from the driver's license. If the speed exceeds the limit by more than 50%, 12 points will be deducted from the driver's license, and a fine for the violation will be imposed.
5
1
Share

How long do I have to wait to retake the test if I fail Subject 2?

You need to wait at least 10 days to retake the test if you fail Subject 2. Here are some important notes for the Subject 2 test: 1. Seatbelt: Fasten your seatbelt as soon as you get in the car. Make sure not to buckle it incorrectly or buckle it to the passenger seat, otherwise the system will directly judge the test as failed. Do not unfasten the seatbelt during the entire test. 2. Adjustments: After getting in the car, adjust the seat, adjust the rearview mirror, fasten the seatbelt, turn on the left turn signal, shift to first gear, and release the handbrake. These six steps are essential. Make sure all preparations are complete before starting. 3. Reverse parking: There is no time limit for reverse parking, but it is important to note that you cannot stop during the process. If the wheels remain stationary for 3 seconds, the system will judge it as stopping midway. Therefore, controlling the speed is crucial.
10
0
Share

How to distinguish between a hump bridge and bridge bump?

The sign for a hump bridge is a raised arched bridge, used to alert drivers to drive cautiously. It is placed at an appropriate position before a hump bridge with significant curvature that affects sight distance. On the other hand, bridge bump is a sign of uneven road surface, featuring two raised sections rather than an arched bridge. The causes of bridge bump are introduced as follows: 1. Cause 1: The main factors causing bridge bump include uneven settlement, abrupt changes in stiffness, vehicle speed, and the vehicle's own vibration resistance performance. 2. Cause 2: In terms of urban road conditions, it is primarily due to uneven settlement at the junction between flexible roads and rigid structures, resulting in step formation. 3. Cause 3: There are differences in the composition materials, stiffness, strength, and thermal expansion properties between bridges and roadbeds or pavements. Additionally, concentrated stress easily forms at bridge connections when subjected to force.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.