Where is the oil filter located on the Geely Boyue 2.0?

What lines will result in penalty points if driven over?

Driving over white solid lines, single yellow solid lines, or double yellow solid lines will result in penalty points. White solid lines: White solid lines are most commonly found at intersections. When approaching the stop line at an intersection, the lane dividers change from white dashed lines to white solid lines. The length of white solid lines varies; some intersections have long white solid lines that start far from the intersection, while others have short ones that only appear close to the intersection. Therefore, lane selection must be completed before entering the solid line area, preferably with some distance to spare. Otherwise, if there is heavy traffic and you cannot change lanes in time, you may end up driving over the line. Single yellow solid lines or double yellow solid lines: Yellow solid lines generally separate lanes going in opposite directions and should not be crossed. Drivers making U-turns or left turns often end up crossing these lines. On roads where U-turns or left turns are permitted, the solid lines will change to dashed lines or have a gap, indicating where such maneuvers are allowed. If the lines remain solid without any gaps or changes to dashed lines, U-turns and left turns are prohibited. Performing these maneuvers would involve crossing the yellow solid lines, which is a traffic violation.

13

5

Share

What Causes High Water Temperature in a Four-Cylinder Engine?

High temperature in a four-cylinder diesel engine is related to coolant, cooling capacity, and engine load. Impact of Coolant Flow: Typically, insufficient fluid volume, especially insufficient coolant, reduces the heat dissipation effect of the equipment, leading to overheating of the diesel engine. For high temperatures caused by this situation, as long as regular inspections are carried out during daily use, the insufficient fluid can be replenished in time. Impact of Cooling Capacity on Water Temperature: Too much scale deposited in the radiator, cylinder, and cylinder head water jacket reduces the heat dissipation function of the cooling water. Moreover, excessive scale in the water jacket also reduces the cross-section of the circulation pipeline, decreasing the amount of water participating in the cooling circulation, thereby reducing the ability to absorb heat from the cylinder block and cylinder head, resulting in excessively high cooling water temperature. If the radiator capacity is too small or the cooling area is insufficient, it affects the cooling effect, causing high water temperature. To prevent this situation, regular inspections should be performed during daily use to promptly detect any abnormalities and carry out repairs or replacements. Impact of Engine Load on Water Temperature: Prolonged operation under overload conditions can lead to increased fuel consumption, higher internal heat generation, and boiling of the cooling water. The best way to deal with this situation is to avoid prolonged overload operation.

4

1

Share

Is it acceptable for the front of the car to exceed the white line in a parking space?

It is not considered a violation if the front of the car slightly exceeds the white line in a parking space. However, if the protruding part affects road traffic, traffic police may impose corresponding penalties. Parking spaces are designed based on certain vehicle dimensions, but there are no regulations specifying that only vehicles of corresponding sizes can park there. Therefore, for longer vehicles, it is acceptable if the car slightly exceeds the front or rear of the parking space, as long as it does not obstruct road traffic. Parking spaces are categorized into two types based on size: Large parking spaces: 15.6 meters in length and 3.25 meters in width, suitable for medium and large vehicles. Small parking spaces: 6 meters in length and 2.5 meters in width, suitable for small vehicles. Parking spaces are also classified into three types based on arrangement: Parallel parking spaces: Standard length of 6 meters and width of 2.5 meters. Angled parking spaces (with angles of 30°, 45°, or 60°): Diagonal length of 6 meters, width of 2.8 meters, with a vertical distance between the two angled lines maintained at 2.5 meters. Perpendicular parking spaces: Length of at least 5 meters (typically set at 6 meters) and width of 2.5 meters, with 2.5x5.3 meters being the optimal standard size. Large vehicle parking spaces should not use angled or perpendicular arrangements.

8

2

Share

Why Do You Need to Pull the Handbrake for 3 Seconds When Starting on a Slope?

Starting on a slope requires pulling the handbrake for 3 seconds because, on steeper slopes or with heavier vehicles, the car may roll backward if the brake is not engaged. If you use your foot to brake, you won't have a foot free to press the accelerator, and releasing the clutch without sufficient power will cause the engine to stall. In such cases, pulling the handbrake is necessary for safety and simplicity of operation. Starting on a slope refers to the process of starting a car on an inclined surface, which is a fundamental skill every new driver must master. The technique involves releasing the clutch while keeping the handbrake engaged, waiting for the engine to vibrate before releasing the handbrake, and then gently pressing the accelerator to allow the car to start smoothly. This method prevents the car from rolling backward. While this procedure may seem cumbersome to experienced drivers, it is particularly suitable for beginners. Correct Method for Starting on a Slope with an Automatic Transmission: When parking, press the brake and engage the handbrake. Upon starting the vehicle, release the brake, press the accelerator, and then disengage the handbrake. This method effectively prevents the car from rolling backward due to brake interruption. Alternatively, use one foot for the brake and the other for the accelerator. When starting on a slope, press the accelerator first, and once the car shows a tendency to move forward or the engine RPM reaches a certain level, release the brake.

17

1

Share

Why can't the dash cam detect the memory card?

The dash cam's inability to detect the memory card can be caused by the following two situations. Below are the reasons and corresponding solutions: 1. The memory card is faulty; the memory card is damaged and cannot store data, causing the dash cam to fail to recognize it during detection and preventing it from continuing to work. Solution: Replace the memory card for testing. 2. The card reader or peripheral components are faulty. The metal contacts inside the card reader are oxidized, leading to poor contact with the memory card; the card reader itself is damaged, making it unable to read the memory card; or components in the card reader's peripheral circuit are damaged, causing power supply or signal transmission interruptions. Solution: Clean the inside of the card reader with a toothpick or replace the card reader. If this doesn't work, further inspection of the surrounding circuits is necessary.

18

0

Share

What are the common faults of car central locking systems?

Common faults in car central locking systems include malfunctioning locks that prevent doors from securing. Modern vehicles feature various types of central locks, but their basic components mainly consist of door lock switches, door lock actuators, and door lock controllers. When central locks fail to secure doors, the issue typically lies with the door lock actuators or controllers. If this occurs, owners should promptly visit repair shops for diagnostics, as specialized equipment can quickly identify fault codes. Below are self-inspection methods: 1. First verify proper installation of components and wiring connections, then check whether power cables (live wires) and ground wires maintain secure connections to the battery. If no abnormalities are found, this indicates potential faults in the electronic control switch box, damaged lock switches, or circuit malfunctions requiring detailed inspection. 2. If only one or two door locks remain inoperative, the probable causes are damaged door lock motors, broken wiring, or mechanical transmission failures in those specific doors.

3

2

Share

Where is the oil filter located on the Geely Boyue 2.0?

What lines will result in penalty points if driven over?

What Causes High Water Temperature in a Four-Cylinder Engine?

Is it acceptable for the front of the car to exceed the white line in a parking space?

Why Do You Need to Pull the Handbrake for 3 Seconds When Starting on a Slope?

Why can't the dash cam detect the memory card?

What are the common faults of car central locking systems?

What is the Principle of Air Deflectors and Spoilers?

What to Do If the Driver's License Expires Without Timely Renewal?

How many points are deducted for racing on the highway?

Why is the BMW 6 Series GT Unpopular?