Where is the oil filter located on the Dongfeng Fengshen AX7?

Wheel Lifespan?

Wheels can generally be used for 3-5 years. It is recommended not to exceed a mileage of 60,000 kilometers. The service life of wheels is directly related to the driver's habits and driving conditions. During daily vehicle use, it is necessary to make a reasonable assessment of the tires. If the tires are no longer usable, they should be replaced promptly. The following are signs indicating the need for tire replacement: 1. Sidewall bulging: If bulging appears on the sidewall of the car tire, it is necessary to replace the tire immediately, as sidewall bulging is difficult to repair. Bulging indicates that the tire cords have broken, which can lead to a blowout at any time while driving. 2. Tire cracks: Tire cracks are also relatively common during daily vehicle use. These cracks can vary in length and depth, so careful judgment is required. Severe tire cracks can lead to bulging and result in a blowout. 3. Tire wear indicators: Car tires have wear indicators, which mark the limit of tire wear. If the tire wear has reached this limit, the tires should be replaced immediately.

13

2

Share

What is the difference between 110v and 220v?

The biggest difference between 110v and 220v is the voltage. 220V transmission consumes less electricity than 110v, and under the same wire conditions, it can effectively reduce energy loss compared to 110V. 220v transmission of the same power reduces the cross-section of the wire, saving a large amount of non-ferrous metals. Compared to 110V, 220V can reduce the working load of the transformer, providing more safety guarantees at the power transformation node. The specific differences between 110v and 220v are as follows: 1. Loss: 220V voltage has smaller losses in long-distance transmission, effectively reducing energy loss compared to 110V, resulting in lower electricity costs. 2. Materials: For transmitting the same amount of electricity, under the same transmission loss conditions, 220V voltage uses a wire cross-section that is half the size of 110V, saving on wire metal materials. 3. Working load: Compared to 110V, 220V can reduce the working load of the transformer, providing more safety guarantees at the power transformation node.

2

Share

Can I Take the Subject 4 Exam Without an Appointment?

You cannot take the exam directly; you need to make an appointment in advance. You can schedule it through the Traffic Management 12123 app or at the driving school where you registered. The Subject 4 exam is the final test for the motor vehicle driver's license. Upon passing, you will be issued the driver's license. Here is some additional information: 1. Passing criteria for the Subject 4 exam: A score of 90 out of 100 is required to pass. The exam lasts 45 minutes and consists of 50 questions, each worth 2 points. If you answer 45 questions correctly (scoring 90 points), you can submit your test early and still pass. There is no difference between scoring 90 and 100. 2. Timeframe for receiving the driver's license after passing the Subject 4 exam: The motor vehicle driver's license is issued on the same day as the exam. As the final step in obtaining the license, you will need to take an oath during the ceremony. You will also receive a probationary sign, which must be displayed on the rear of your vehicle during the one-year probationary period after obtaining the license.

7

4

Share

Is the Spare Tire the Same as the Original Tire?

Spare tires are not the same as original tires. There are two types of spare tires for cars: full-size spare tires and non-full-size spare tires. Generally, vehicles come with non-full-size spare tires. When purchasing a car, it is recommended that owners inquire in detail about the spare tire. The following are precautions for using a spare tire: 1. Regularly inspect the spare tire: Owners should check the spare tire during routine maintenance or before long trips, focusing on tire pressure, wear, and cracks. If the tread wear reaches the wear indicator line during inspection, the spare tire should be replaced promptly. If there are fine cracks on the sidewall of the spare tire, prolonged driving should be avoided as it may lead to a blowout. 2. Keep oil products away from the spare tire: Tires are primarily made of rubber, which can be eroded when mixed with oil products. Many owners often store lubricants and other oil products in the trunk. If these come into contact with the spare tire, the lifespan of the spare tire can be significantly reduced. If oil stains accidentally get on the tire, they should be washed off immediately with detergent. 3. Pay attention to the lifespan of the spare tire: As a rubber product, spare tires age over time. Prolonged storage can lead to severe aging or even failure. Typically, the aging period for tires is about 4 years, after which the spare tire should be replaced.

13

1

Share

What Causes a Chainsaw to Lose Power?

The air filter of a chainsaw can filter out sawdust, dirt, and other foreign objects, preventing them from entering the cylinder and causing severe accidents like cylinder scoring. When a chainsaw experiences issues such as stalling upon acceleration, lack of power, or engine overheating, it may be due to a dirty air filter that requires maintenance and servicing. Additional information is provided below: 1. The air filter should be inspected before work: A clean and qualified air filter should appear transparent and bright when held up to sunlight. An unqualified air filter will be covered with wood chips and dirt, feeling thick and hard to the touch. In such cases, it should be cleaned with hot soapy water, dried, and must be clean, translucent, and soft to ensure the chainsaw operates normally. 2. Carburetor: The carburetor has three adjustment screws, labeled T, H, and L. Turning them clockwise tightens, while counterclockwise loosens. The T screw is the idle speed screw; tightening it increases fuel intake, while loosening it decreases fuel. The H screw is the high-speed screw, which affects the chainsaw's high-speed operation; tightening it makes the chainsaw run faster, while loosening it slows it down. The L screw is the low-speed screw, which adjusts the chainsaw's low-speed operation; tightening it makes the chainsaw run faster, while loosening it slows it down, stops it, or causes it to stall.

6

1

Share

When Can the Red Ribbon on a New Car Be Untied?

New car The red ribbon on a new car should be tied for one to two days. Here are some precautions to take after purchasing a new car: 1. Do not drive without a license: You can buy a car without a driver's license, but you cannot drive it on the road afterward. Driving without a license is illegal. 2. License plate instructions: When registering the car after purchase, a driver's license is not required for inspection. To register a new car, you will need an ID card, certificate of conformity, purchase invoice, proof of completed vehicle purchase tax, and insurance policy. At the vehicle management office, staff will inspect the vehicle and take photos. After the car is registered, the owner will receive a vehicle registration certificate and a vehicle license. 3. Carry the vehicle license with the car: When driving, you must carry both your driver's license and vehicle license. During the probationary period, driving on highways is not allowed.

15

3

Share

Where is the oil filter located on the Dongfeng Fengshen AX7?

Wheel Lifespan?

What is the difference between 110v and 220v?

Can I Take the Subject 4 Exam Without an Appointment?

Is the Spare Tire the Same as the Original Tire?

What Causes a Chainsaw to Lose Power?

When Can the Red Ribbon on a New Car Be Untied?

When to Use the +- in D Gear?

What are the solutions for the P0321 trouble code?

Does the Air Conditioning Fan Speed Affect Fuel Consumption?

What Type of Fuel Should a China VI Standard Vehicle Use?