Where is the oil filter located on a BMW 525?

1 Answers
VanLaura
07/30/25 8:35am
The oil filter on a BMW 525 is located on the left side of the transmission. Oil Filter: The oil filter, also known as the oil cleaner, functions to remove debris, gum, and moisture from the engine oil, delivering clean oil to all lubrication points. Filter: The diesel generator set's filter is a specialized pre-filtration device for diesel used in internal combustion engines. It can remove over 90% of mechanical impurities, gum, and asphalt from diesel, ensuring maximum cleanliness of the fuel and extending the engine's service life. Unclean diesel can lead to abnormal wear in the engine's fuel injection system and cylinders, resulting in reduced engine power, rapid increase in fuel consumption, and significantly shortened generator lifespan. Using a diesel filter can greatly improve the filtration precision and efficiency of engines equipped with felt-type diesel filters, extend the lifespan of imported high-quality diesel filters several times, and achieve noticeable fuel savings. How to install a diesel filter: The installation of a diesel filter is extremely simple. Just connect it in series to the fuel supply line using the pre-installed inlet and outlet ports. Pay attention to the direction indicated by the arrow; the inlet and outlet must not be reversed. During initial use or when replacing the filter element, fill the diesel filter with diesel and ensure proper venting. The vent valve is located on the end cap of the barrel.
Was this review help?
2
3
Share
More Forum Discussions

Where is the K5 trunk spring located?

k5 trunk spring is located deep inside the trunk on the inner side of the cover. The spring is used to prevent the risk of accidentally hitting your head when the trunk lid is lifted. The K5 is a Kia vehicle, which is a mid-size 4-door 5-seater sedan. The car has a length, width, and height of 4980mm, 1860mm, and 1445mm respectively, with a wheelbase of 2900mm. This car is equipped with a 1.5T 170 horsepower inline 4-cylinder engine and a 7-speed dual-clutch transmission, with a maximum power of 125 kilowatts and a maximum torque of 253 Newton meters. The drive system is front-wheel drive, with a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
8
2
Share

How to Distinguish Between BMW Long Wheelbase and Short Wheelbase Models?

Differences between BMW long wheelbase and short wheelbase models: 1. Different wheelbase: The long wheelbase version has a wheelbase of 2961mm; the short wheelbase version has a wheelbase of 2851mm. 2. Different rear logos: The long wheelbase version features 'BMW Brilliance' at the rear; the short wheelbase version simply has 'BMW'. 3. Different body dimensions: The long wheelbase version measures 4734mm in length, 1811mm in width, and 1429mm in height; the short wheelbase version measures 4734mm in length, 1811mm in width, and 1455mm in height. BMW is a German luxury car brand headquartered in Munich, Bavaria, Germany. BMW's vehicle series include the i, X, Z, and pure numeric models, with series such as 1, 2, 3, 4, 5, 6, 7, 8, etc., along with the M series, which is based on improvements to the various series.
5
2
Share

Where is the OBD interface located on the Ford Focus?

The OBD interface of the Ford Focus is located inside the storage compartment below the light control switches. Pull open the storage compartment and remove it to access the interface. The Ford Focus is a compact car with dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, a wheelbase of 2705mm, a fuel tank capacity of 53 liters, and a curb weight of 1245kg. It delivers a maximum horsepower of 122 PS, a maximum power output of 90 kW, and a maximum torque of 153 Nm. This model features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension, with a front-wheel-drive layout.
8
3
Share

Which Wheels Should Snow Chains Be Installed on for Rear-Wheel Drive Vehicles?

Snow chains for rear-wheel drive vehicles should be installed on the rear wheels. Generally, snow chains should be mounted on the driving wheels. If the vehicle is front-wheel drive, they need to be installed on the front wheels. However, if possible, it is better to install them on all four wheels for greater stability and safety. Installing chains on only two wheels can lead to fishtailing or skidding. While installing snow chains on two wheels is still useful, their effectiveness is significantly reduced if they are mounted on non-driving wheels. The installation method for snow chains is as follows: 1. Lay the snow chain flat and centered in front of the tire; 2. Drive the vehicle forward half the length of the snow chain so that the tire's contact point is at the center of the chain; 3. Secure the hooks on the inner side of the tire first, then those on the outer side; 4. Continue moving the vehicle forward to adjust the connection points where the chain bears the load, then firmly fix the snow chains on the tires.
17
5
Share

Will repairing the bumper affect future depreciation?

Replacing the bumper will affect the car's price, and it certainly has an impact on the vehicle. Since the bumper is a physical component, depreciation will occur. After all, there is a difference between the original bumper and a replaced one, so replacing the bumper will definitely lead to depreciation, but it won't significantly impact the car's overall price. Below are some reasons why car prices may drop: 1. Price reductions to alleviate inventory pressure: High inventory pressure can have multiple effects, the most obvious being that it occupies more storage space and increases the difficulty of inventory management. Additionally, it can affect the cash flow of manufacturers and dealers. 2. Price reductions to promote capital recovery: The end of the year is a peak season for car purchases, with increased demand. Following normal logic, prices should rise rather than fall at year-end, but often, price reductions are implemented. On one hand, this is certainly to attract consumers in a competitive market, and on the other hand, it is to quickly recover the invested operating capital. By reducing prices to boost sales, the entire upstream and downstream industrial chain can be stimulated to accelerate operations, ultimately leading to greater profits.
17
0
Share

What should be noted when overtaking a bicycle traveling in the same direction?

Here are the precautions to take when overtaking a bicycle traveling in the same direction: 1. Reduce speed: Observe the dynamics carefully, slow down, and maintain a sufficient safe distance. 2. Turn signal: Activate the turn signal in advance. 3. Visibility: For driving safety, try to avoid blind spots as much as possible. Avoid blocking the rear windshield with objects to maintain good visibility. Adjust the rearview mirror to maximize the field of view, or consider installing a wide-angle rearview mirror inside the car. These methods can help minimize blind spots.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.