···
Log in / Register

Where is the oil filter located?

4 Answers
DelAlexa
07/29/25 8:17pm

The location of the oil filter varies depending on the brand and model of the vehicle. Generally, the oil filter is located on the engine block. In some cars, you can see the oil filter simply by opening the engine hood, while in others, you need to lift the car with a jack to access it. The oil filter is a crucial component that filters out impurities from the oil, keeping it relatively clean. It must be replaced every time the engine oil is changed. Engine oil naturally contains a certain amount of gums, impurities, water, and additives. During engine operation, the introduction of metal particles, contaminants from the air, and the formation of oil oxidation products gradually increase the impurities in the oil. If the oil bypasses the filter and directly enters the lubrication circuit, these impurities can reach the friction surfaces of moving parts, accelerating wear and reducing the engine's lifespan.

Was this review help?
10
2
Share
Jill
08/14/25 4:46pm

I'm so familiar with the oil filter location after driving for so many years. It's generally near the engine, most commonly at the bottom of the engine bay, close to the oil pan. Why put it there? Mainly for efficient oil filtration, directly connected to the pump for quick purification. Locations vary by vehicle: for regular sedans like my old Toyota, you can easily spot it by just crawling under the car; SUVs or off-road vehicles might hide it behind a shield, requiring part removal; European cars like BMW or Audi have trickier placements, making them harder and more time-consuming to access. Location affects maintenance costs—easily accessible ones are simpler and cheaper to replace, with a recommended change every 5,000 km for optimal care. For DIY oil changes, an easy-to-find location is a plus, or else your tools go to waste. Neglecting filter changes leads to dirty oil, faster engine wear, and big risks. Remembering its location makes regular checks convenient—cars, like human organs, need frequent care. When buying a car, ask about the filter's design to avoid future hassles.

Was this review help?
14
4
Share
Expand All
RyanAnn
10/16/25 3:33am

Where is the oil filter located? In my car repair experience, it's very common. It's mainly fixed at the bottom area of the engine, near the oil inlet point, aiming to shorten the oil path and improve filtration efficiency. For most models, it's located near the lower part of the engine – for typical family cars, just look underneath and the metal canister is quite visible. The positioning considers vibration control and operational efficiency, varying by brand: Japanese cars usually have straightforward and accessible placements; American models like Ford might position it slightly off; performance vehicles often conceal it cleverly. Accessibility impacts service speed – simple locations allow quick, effortless, and cost-effective replacements; complex placements increase labor costs and time. Novice owners should familiarize themselves with its location and adhere to regular maintenance without negligence – mandatory servicing every 6 months or 8,000 km. A dirty filter degrades oil quality, causing rough engine sounds and potentially damaging core components over time. Mastering basic car knowledge, including understanding component locations, is fundamental.

Was this review help?
16
2
Share
Expand All
OJourney
11/29/25 4:21am

The oil filter is typically located underneath or on the side of the engine, near the oil pump. Specific positions vary by vehicle: most compact cars have it in the front undercarriage for visible access, designed to filter impurities and ensure smooth oil flow. For example, in my Volkswagen model, it's conveniently positioned above the right front wheel for easy visibility. Location design impacts DIY ease—accessible ones enable quick, cost-saving self-replacement; harder-to-reach ones may require tools or professional assistance. Regular filter changes, synchronized with oil changes every ~8,000 km, are crucial. Neglecting its location complicates maintenance and increases engine risks. Simply knowing its position helps extend vehicle lifespan and reduce upkeep costs.

Was this review help?
7
3
Share
Expand All
More Forum Discussions

How to Turn on the Car Air Conditioning Heating?

The method to turn on the car air conditioning heating is: 1. Start the car and wait until the water temperature rises to the normal level, then turn on the heating; 2. Switch the air circulation mode to the internal circulation setting; 3. Adjust to the heating mode; 4. There is no need to turn on the AC switch; 5. Set the air conditioning to a suitable level. The components of car air conditioning include: 1. The air conditioning refrigeration system; 2. The heating system; 3. The air distribution system and the control system. The functions of car air conditioning are: 1. To regulate the temperature, humidity, airflow direction, and speed inside the car, and to improve the air quality through the filter; 2. To provide a comfortable riding environment for passengers, reduce travel fatigue, create good working conditions for the driver, and ensure safe driving with proper ventilation.
6
0
Share

How many tons can the Changan Kuayue Wang X5 carry?

Changan Kuayue Wang X5 can carry about 4 tons. Here are the specific details of the Kuayue Wang X5: 1. Vehicle Positioning: The Kuayue Wang X5 is a light truck launched by Changan Automobile, equipped with a 3.5-ton rear axle and a series of configurations designed to enhance load-bearing performance. 2. Power: This vehicle is powered by a 1.5L engine, which delivers a maximum power of 112 horsepower and a maximum torque of 143 Nm. The engine complies with the National Five vehicle emission standards. 3. Transmission System: The vehicle is paired with a Qingshan MR515 five-speed transmission.
15
5
Share

What Does the Maintenance Light on the Kadjar Mean?

The maintenance light on the Kadjar illuminates to remind the owner that maintenance is required. Below are the specific details about the Renault Kadjar: 1. Vehicle Positioning: The Renault Kadjar is a compact SUV domestically produced by Dongfeng Renault. The body dimensions of the Kadjar are 4508 1836 1610mm. 2. Powertrain: It features two powertrain options: a 1.2-liter turbocharged engine and a 2.0-liter naturally aspirated engine. The 1.2-liter model delivers a maximum horsepower of 117 HP, a maximum power output of 86 kW, and a maximum torque of 190 N·m. The 2.0-liter model offers a maximum horsepower of 154 HP, a maximum power output of 113 kW, and a maximum torque of 196 N·m. Transmission options include a 6-speed manual and a CVT continuously variable transmission.
7
1
Share

What Causes the Gurgling Water Sound When the Car Stops?

The gurgling water sound when the car stops is caused by gas in the cold exhaust pipe waiting to be re-burned. Possible reasons for sounds when the car stops include: 1. Cooling sound of the three-way catalytic converter: The normal operating temperature of the three-way catalytic converter is between 400 to 800 degrees Celsius. After turning off the engine, it gradually stops working, the temperature drops, and internal metal components expand and contract due to heat, producing abnormal noises; 2. Cooling sound of the exhaust pipe: The temperature of the exhaust pipe during cold idle is around 200 degrees Celsius, and the thermal expansion and contraction of the exhaust pipe cause abnormal noises; 3. Turbo cooling sound: The rapid rotation and friction of the turbocharger generate high temperatures. After turning off the engine, the thermal expansion and contraction become very noticeable, producing abnormal noises; 4. Abnormal noises caused by uneven cooling of the engine: The engine temperature is very high, and after turning off the engine, the temperature of various components drops at different rates, leading to gaps between internal metal parts cooling and contracting, resulting in friction and abnormal noises.
15
5
Share

Should You Inspect the Car or Pay First When Taking Delivery?

Generally, the car delivery process involves inspecting the vehicle first. Do not rush to make the payment before thoroughly checking the new car, as once the payment is made, it essentially means all procedures are completed, handing over the initiative to the dealer. If any issues are found during the inspection afterward, it may become inconvenient to request a refund or exchange. Key considerations when taking delivery of a new car are as follows: 1. Taxation: Taxation is an essential step in the car purchase process. Most tax payment windows for vehicles do not accept cash, so it is advisable to prepare a bank card in advance. Typically, the vehicle management office also has dedicated tax payment windows where you can complete this process. 2. Selecting the Model and Configuration: The first step in buying a car is to choose the model and the desired configuration. When selecting a model, it is crucial to consider your budget. The principle of car selection is to first determine the type of vehicle you want—such as a sedan or SUV—and then prioritize the parameters that matter most to you, such as fuel consumption, maintenance costs, space, noise levels, and cargo capacity.
20
2
Share

What kind of memory card is used for dash cams?

Currently, the vast majority of dash cams use Micro-SD cards, originally named Trans-flash-Card (TF card), which is a member of the SD-Card Association. Due to their small size, fast transfer speed, and support for hot-swapping, they are widely used in mobile phones, navigation devices, and some automotive electronic products. The dimensions are only 15x11x1mm. Additional information is as follows: 1. How loop recording works: The video footage from dash cams is stored on removable memory cards. Videos are typically segmented into 1, 3, or 5-minute clips based on user settings. When the memory card is nearly full, the dash cam automatically deletes the oldest clip to store newly recorded videos, preventing storage shortages. 2. TF card: The memory card used in dash cams is also called a TF card, short for Trans-flash-Card. It supports hot-swapping, can be rewritten repeatedly, offers fast storage speeds, and is compact in size. These advantages make it widely used in various electronic devices for data storage. It is particularly suitable for the frequent read-write operations of dash cams, enabling the loop recording function. Depending on the size of the memory card, it can continuously loop and store recorded video footage.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.