Where is the oil filter for the Boyue 2.0 located?

1 Answers
SanEdward
07/29/25 5:31pm
The oil filter for the Boyue 2.0 is located at the upper right side of the engine. The function of the oil filter is to remove impurities, colloids, and moisture from the engine oil, delivering clean oil to various lubrication points. Taking the 2020 Boyue 2.0 as an example, it is a compact SUV with body dimensions of 4519mm in length, 1831mm in width, 1694mm in height, and a wheelbase of 2670mm. The 2020 Boyue 2.0 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 141PS, a maximum torque of 178Nm, and a maximum power of 104kW.
Was this review help?
20
0
Share
More Forum Discussions

What does it mean when the ABS light is on in the car?

When the ABS light is displayed in a car, it indicates a malfunction in the vehicle's Anti-lock Braking System. If the wheels lock up during emergency braking, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks. There are several states in which the ABS light may illuminate, each with different causes and solutions, as detailed below: State 1: ABS warning light stays on continuously (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle speed and the wheel slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage may drop below 10.5V. As the engine speed increases and the voltage rises, the ABS warning light turns off. This may also occur if the ABS system's power supply voltage is too low due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wiring connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speed signals; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the fuel tank cap sticker. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal, push the brake switch linkage down fully with your finger, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.
4
0
Share

How to Drive a Turbocharged Car More Fuel-Efficiently?

To drive a turbocharged car more fuel-efficiently, avoid sudden acceleration at startup, gently press the throttle, and reduce braking. Here are more fuel-saving tips: 1. Maintain a steady speed: The most fuel-efficient state while driving is when the car maintains a constant speed in a straight line. For cars with lower displacement, speeds between 60-80 km/h result in lower fuel consumption, while for medium-displacement cars, speeds between 80-100 km/h are relatively more fuel-efficient. Keeping the car at its economical speed is beneficial for fuel efficiency. 2. Avoid opening windows at high speeds: When driving on highways, try not to open the windows as it increases aerodynamic drag and fuel consumption. Instead, use the air conditioning's external circulation mode for ventilation. When driving above 80 km/h, the fuel consumption from open windows exceeds that of using air conditioning.
17
0
Share

What is the meaning of the gecko sticker on the back of a car?

Car owners stick a "gecko" on the back of their cars to bring good luck. Here are some related introductions about cars: 1. Body classification: Starting with the most basic body classification, this can be directly judged by the external characteristics of a car. The most common categories of passenger cars currently include sedans, sports cars, SUVs, MPVs, and several other major categories. 2. Fuel tank capacity: Fuel tank capacity refers to the volume of fuel a car can carry, usually measured in liters (L). Generally, the fuel tank capacity has a direct relationship with the car's fuel consumption. Typically, a car can travel more than 500 kilometers on a full tank of fuel. For example, a car that consumes 10 liters per 100 kilometers usually has a fuel tank capacity of around 60 liters. Each car model has a different fuel tank capacity, and even within the same category, different brands may have different fuel tank capacities, which is determined by the manufacturers.
8
2
Share

When does the highway toll-free period refer to?

Highway toll-free time refers to the time when you exit the highway. Below is relevant information about highways: 1. Sign introduction: Highway signs typically feature an overpass symbol between two roads. The background color of the sign varies depending on different countries and regions. Mainland China, Taiwan China, South Korea, the United States, Canada, Japan, Switzerland, etc., use a green background. 2. Classification: Roads are divided into five categories based on their usage tasks, functions, and traffic volume: highways, first-class roads, second-class roads, third-class roads, and fourth-class roads. Highways are trunk roads exclusively designed for automobiles to travel in separate directions and lanes with full access control.
11
4
Share

Can upgrading the ECU improve car performance?

Upgrading the ECU can improve car performance. Here is relevant information about ECU upgrades: 1. Introduction: (1) Remove restrictions. There was originally a maximum limit where the car couldn't exceed certain speed or power levels. Removing this limit allows for greater performance. (2) Change air-fuel ratio. When the car operates, the engine mixes air and fuel which ignites to produce power. Adjusting this ratio affects performance. 2. Risks: (1) Increased carbon buildup. Most domestic ECU tuning manufacturers lack proper engine calibration capabilities. They simply overwrite existing installation packages or data files for direct upgrades. Without proper coordination with other components, this easily leads to carbon buildup. (2) Increased fuel consumption. With improved performance, fuel consumption also increases.
18
0
Share

How to Learn Driving for People with Poor Car Sense?

People with poor car sense should build confidence, stay diligent, and not get discouraged, taking steady and solid steps. Below is relevant information about car sense: 1. Methods: (1) Master the correct driving posture. Comfort is key when driving, so the first thing a learner should do after getting in the car is to adjust the seat position. The front and back distance of the seat should be adjusted so that the left foot can press the clutch pedal all the way down with ease. During the process of pressing and releasing the clutch, the right hand can adjust the seat forward or backward based on comfort until satisfaction is achieved. (2) Rearview mirrors are crucial. Rearview mirrors act as the driver's "third eye," providing additional safety while driving. During the driving test, learners need to adjust the rearview mirrors to obtain a better view of the rear. 2. Operation: Beginners are advised to first study theory before getting behind the wheel. Only by memorizing the basic operational methods theoretically can they develop correct operational habits in practice. Continuous practice and summarization will help cultivate the right car sense over time.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.