···
Log in / Register

Where is the oil dipstick of the Volvo S60L?

4 Answers
MaxFitz
09/03/25 5:17am

The oil dipstick of the Volvo S60L is located under the hood. To check the oil level, you need to open the hood, locate the oil filler port, unscrew the oil cap, and inspect the oil dipstick to determine if the oil level is normal. Here are the specific steps to check the oil level of the Volvo S60L: 1. Open the driver's side door; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Lift the engine hood upwards; 4. Secure the hood with the support rod; 5. Unscrew the oil cap and inspect the oil dipstick; 6. The oil level should be between the upper and lower marks on the dipstick. The Volvo S60L is a mid-size sedan produced at the Chengdu factory located in Longquanyi District, Sichuan, China. It is based on the Volvo S60 prototype, with the S60L having an 80mm longer wheelbase compared to the S60.

Was this review help?
6
4
Share
AliyahAnn
09/15/25 6:48am

I found the oil dipstick for the Volvo S60L located in the engine compartment. After opening the hood, look toward the front of the engine—it is usually positioned on the sidewall near the fan side, featuring a yellow or orange plastic pull ring. Gently pull it out, wipe off any oil residue, reinsert it fully, then pull it out again to check the oil level markings—the oil should be between the high and low marks. If not, promptly add the appropriate engine oil. It is recommended to check when the car is stationary and the engine is cool to avoid misjudgment when the engine is hot. Engine oil is crucial for protecting the engine, and regular checks can prevent oil burning or leakage issues. I also clean the pull ring periodically to avoid clogging and ensure accurate readings. Remember to refer to the owner’s manual to confirm the exact location, as slight adjustments may exist between different model years.

Was this review help?
20
3
Share
Expand All
LeAdrian
10/29/25 7:28am

I was also curious about this when I first drove my Volvo S60L. The oil dipstick is hidden in the engine compartment. After opening the engine hood, search the upper or side part of the engine, and you'll see a handle-like object, usually yellow in color—that's the oil dipstick. Pull it out, wipe it clean, then reinsert and pull it out again to check the oil level. If it's below the Min line, you need to add oil; if it's too dirty, it's a sign to change the oil. I make it a habit to check once a month, ensuring the car is on level ground and the engine is cold. Don't overlook this, as maintaining the correct oil level can prevent engine overheating and malfunctions. If you're unsure about its location, take a photo of the engine compartment with your phone and compare it with online images. Beginners should take their time to figure it out and avoid pulling randomly.

Was this review help?
9
3
Share
Expand All
AnthonyFitz
12/12/25 7:38am

In my experience with the Volvo S60L, locating the dipstick is straightforward. After opening the hood, the dipstick is secured near the front of the engine, typically marked by a yellow pull-ring handle. Gently pull it out, wipe it clean, then reinsert and remove to check the reading—the oil mark should be between the minimum and maximum indicators. Always remember to reinsert it properly after inspection. Regularly performing this check helps promptly identify low oil levels or leaks. It's advisable to check at least every thousand kilometers to maintain engine health. Ensure the engine is turned off and cooled down before performing this check for safety.

Was this review help?
16
4
Share
Expand All
More Forum Discussions

How to switch between air conditioning and heating in Nissan Tiida?

Nissan Tiida's air conditioning and heating can be directly switched via buttons. Simply increase the temperature to activate heating, and turn off the AC button to save energy. The compressor doesn't need to engage during heating operation, as warmth is directly supplied by the coolant system and windshield heating wires. For automatic climate control, press the AUTO button - the system will automatically maintain cabin temperature stability without manual adjustment, making decisions based on sensor signals. Taking the Tiida 2021 1.6L Manual Ledong Edition as an example, its body dimensions are 4393mm (length) × 1766mm (width) × 1539mm (height) with a 2700mm wheelbase. It features a 5-door, 5-seat hatchback configuration, 50-liter fuel tank capacity, and 1180kg curb weight.
7
5
Share

What does the 'H' on car tires represent?

The 'H' on car tires represents the speed rating of the tire. The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions. Tires are circular elastic rubber products installed on metal rims, designed to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance. The steps to replace a car tire are: 1. Park the car, turn off the engine, and apply the handbrake; 2. Place heavy objects in front of and behind the wheels to prevent rolling, and set up a triangular warning sign behind the vehicle; 3. Use a wrench to loosen the lug nuts of the tire to be replaced in a diagonal pattern; 4. Position the jack on the side of the tire to be replaced and lift the vehicle to a certain height; 5. Remove the lug nuts and take off the tire; 6. Install the spare or new tire and tighten the lug nuts in a diagonal pattern; 7. Lower the vehicle by releasing the jack and ensure all lug nuts are properly tightened.
7
4
Share

What is the method for shifting gears in an automatic transmission?

The method for shifting gears in an automatic transmission is: locate the button on the side of the gear lever, press the button while shifting, move the gear lever to the desired gear position, and then release it. Without pressing the button, the gear lever cannot be moved. The gear positions in an automatic transmission car are: P (Park), R (Reverse), N (Neutral), D (Drive), L (Low), S (Sport mode), and OD (Overdrive). Precautions for driving an automatic transmission car include: 1. Do not shift into P while driving; 2. After driving, the engine must be turned off and the gear must be shifted into P before the key can be removed; 3. Do not shift into N while driving to coast; 4. When starting the vehicle in P or N, remove the gear lever from P while pressing the brake, turn on the power while pressing the brake, shift to N, and after ignition, shift into D to move forward directly.
16
4
Share

Does the Buick GL6 have a 6-seater option?

Buick GL6 does have a 6-seater configuration. The Buick GL6 is an MPV under the SAIC-GM joint venture. Taking the Buick GL6 2021 323T Light Hybrid Connected Elite model as an example, its dimensions are 4692mm in length, 1794mm in width, and 1626mm in height, with a wheelbase of 2796mm. The body structure features 5 doors and 6 seats, a fuel tank capacity of 45 liters, and a trunk capacity of 1521 liters. In terms of power, the Buick GL6 2021 323T Light Hybrid Connected Elite model is equipped with a gasoline engine plus a 48V light hybrid system. The engine is a 1.3L turbocharged engine with a maximum power of 120kW and a maximum torque of 230Nm, paired with a 6-speed automatic transmission.
11
1
Share

How to Adjust the Sound Effects of the Passat?

The method to adjust the sound effects of the Passat: You can adjust it in the 'tone' settings, where you can set the music genre, treble and bass, loudness, and the volume of front, rear, left, and right speakers. You can also adjust the high, mid, and low frequencies. It is recommended to attenuate the bass as the low frequency is somewhat excessive, leading to noticeable standing waves. The car audio system is designed to alleviate the monotony of driving and traveling for the driver and passengers. The Passat is a mid-size car under SAIC Volkswagen. Taking the Passat 2021 280TSI Business Edition as an example, its dimensions are 4933mm in length, 1836mm in width, and 1469mm in height, with a wheelbase of 2871mm. The body structure is a 4-door, 5-seater sedan, with a fuel tank capacity of 68.5 liters and a trunk capacity of 521 liters.
12
1
Share

What Causes a Car to Stall After Jerking?

The reasons for a car stalling after jerking are: 1. Issues with the transmission gear program settings; 2. Internal contamination and impurities in the transmission, which prevent effective regulation of transmission oil pressure; 3. Transmission cooling problems. Poor transmission cooling can lead to abnormally high temperatures, affecting the performance of the transmission fluid. The rubber sealing materials in the transmission may harden, causing leaks and consequently affecting oil pressure. Jerking is more likely to occur during sudden acceleration or acceleration after braking. The computer's shifting logic is based on the driver's throttle input. Normally, when the driver gradually presses the accelerator, the computer's default logic would simply upshift to complete the acceleration. However, if the input is too forceful, the clutch may realize during upshifting that a downshift is necessary to fulfill the intention of sudden acceleration, leading to an immediate downshift. This back-and-forth process disrupts the smooth transmission of power, resulting in jerking.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.