Where is the oil dipstick located on the Audi A4L?

2 Answers
CollinMarie
07/29/25 8:29am
Audi A4L's oil dipstick is located next to the engine. The specific steps to check the oil level are: 1. Open the driver's side door; 2. Pull the hood release lever located in the driver's footwell; 3. Lift the front engine hood upwards; 4. Pull out the oil level dipstick located near the engine; 5. The oil level should be between the upper and lower marks on the dipstick. The Audi A4L is a mid-size sedan under FAW-Volkswagen Audi, with body dimensions of 4858mm in length, 1847mm in width, 1439mm in height, a wheelbase of 2908mm, and a minimum ground clearance of 118mm.
Was this review help?
9
0
Share
Fred
08/11/25 6:01pm
Last time I helped my friend locate the dipstick on his Audi A4L, it was quite a hassle – the design is way too hidden! That black plastic pull ring in the upper left corner of the engine bay is actually it, concealed beneath the engine cover. To check, you need to turn the key to the accessory position (don't start the engine), then select 'Oil Level' under the 'Maintenance & Inspection' menu on the center display, and wait for the system to complete the test before viewing the data. Never check immediately after the engine is hot – the expanded oil will give falsely high readings. Here's a pro tip: if you notice sudden increased oil consumption, remember to check the PCV valve, as the EA888 engine is prone to this issue. Nowadays Audi has phased out traditional metal dipsticks, so don't panic if you can't find one.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

Does the Anti-Slip Light Affect the Car?

If the anti-slip light remains constantly illuminated, it indicates a malfunction in the car's anti-slip system, and it is not advisable to continue driving at this time. With the anti-slip system disabled, the car is prone to skidding or rolling over on slippery roads, significantly compromising driving stability and safety. Common causes of anti-slip light malfunctions include: 1. Human error: accidentally pressing the ESP off button, manually disabling the anti-slip system. 2. Software issues: poor signal transmission due to software problems. 3. Vehicle-related issues: blown fuses or short circuits in wiring, poor contact or failure at sensor interfaces, or ABS pump failure.
2
5
Share

What are the reasons for the BMW 1 Series auto start-stop system not working?

BMW 1 Series auto start-stop system not working reasons are as follows: Accidentally pressing the auto start-stop: Generally, vehicles equipped with auto start-stop function have the system enabled by default. If it suddenly stops working, it might be due to accidentally pressing the auto start-stop button on the car, causing the system to turn off. The solution is to check if the system has been turned off. Auto start-stop system operational limitations: Conditions where the function will not activate include the engine not reaching normal operating temperature, automatic air conditioning not reaching preset temperature, insufficient battery charge, turning the steering wheel after stopping, emergency braking, reversing, etc. The solution is to have the vehicle inspected and repaired promptly.
12
3
Share

What is the Difference Between Super Select 4WD and Part-Time 4WD?

Super Select 4WD and part-time 4WD differ as follows: 1. Part-Time 4WD: Part-time 4WD uses a purely mechanical structure, offering better reliability. However, its drawback is that switching modes requires stopping the vehicle, and after switching, the vehicle can hardly turn, so it is usually limited to 2WD mode. 2. Super Select 4WD: Super Select 4WD is different—it allows switching between 2WD and 4WD modes while driving at high speeds without needing to stop. Due to its 'inter-axle differential,' when in 4WD mode, it operates more similarly to full-time 4WD, enabling high-speed turns on any road surface in 4WD mode.
12
0
Share

What are the symptoms of a faulty VVT valve in the Baojun 730?

Baojun 730 VVT valve failure may cause symptoms such as difficulty starting the car and unstable idling. Introduction to Automotive VVT Valve: VVT refers to the Variable Valve Timing system, which is a technology used in automotive piston engines. VVT technology can adjust the overlap time and timing of the engine's intake and exhaust systems, reducing fuel consumption and improving efficiency. Working Principle: The working principle of VVT is that the crankshaft drives the camshaft through a timing belt, gear, or chain. The profile and position of the cam on the camshaft are usually optimized for specific engine speeds, which typically reduces torque at low engine speeds and power at high engine speeds.
7
0
Share

What is the purpose of laser lights on highways?

The function of laser lights on highways is to alert and warn drivers. Here is relevant information: 1. Principle: These green lasers are anti-fatigue warning laser lights on highways, featuring high brightness and long range. They can effectively stimulate the brain of drivers who drive for long periods at night, using this method to prevent fatigue. 2. Function: The installation of anti-fatigue laser lights on highways can stimulate drivers through changes in light, thereby altering the visual fatigue caused by monotonous driving conditions. After multiple on-site inspections and concentrated discussions, highway traffic police have placed these laser lights on relatively straight sections of road that are prone to causing driver fatigue. The lasers are adjusted to ensure sufficient brightness while also providing a certain visual impact, effectively preventing driver fatigue.
5
1
Share

What is the fuel consumption of Nissan Tiida?

Nissan Tiida's fuel consumption is 7.2 liters/100 kilometers. Driving habits: If the driver frequently engages in aggressive driving, rapid acceleration, or sudden deceleration during the driving process, it will affect the car's fuel consumption. According to statistics, incorrect driving habits can increase the car's fuel consumption by approximately 5-30%. Tire pressure: When the tire pressure is either too high or too low, the car's fuel consumption will increase. Road conditions: If the car often travels on roads with poor conditions, the engine load will increase, and the car's fuel consumption will naturally rise.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.