Where is the OBD port on the X-Trail?

1 Answers
Phillips
07/29/25 11:37pm
The OBD port on the X-Trail is located under the steering wheel. The OBD port can monitor the working condition of the engine's electronic control system in real-time while the vehicle is running. Taking the 2021 X-Trail as an example, it belongs to the compact SUV category with body dimensions of: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, fuel tank capacity 65L, and luggage compartment volume 700L. The 2021 X-Trail is equipped with a 2.0L naturally aspirated engine, delivering maximum horsepower of 151PS, maximum power of 111kW, maximum torque of 194Nm, paired with a 7-speed continuously variable transmission.
Was this review help?
8
0
Share
More Forum Discussions

Can I Take the Household Register for the Subject 2 Test?

You cannot take the Subject 2 test with a household register because the household register (household booklet) is different from a personal ID card. The household booklet does not contain a photo of the individual, making it impossible to verify personal information. Additionally, the household register cannot read system data. Therefore, candidates taking the motor vehicle driver's license test must present their original valid ID card or temporary ID card and cannot use the household register for the exam. Below is relevant information about temporary ID cards: Although a temporary ID card can be used for the Subject 2 test, its validity period is only 3 months. Be sure to check the expiration date, as an expired temporary ID is not allowed for the test.
11
4
Share

What are the effects of delaying an oil change?

Here are the impacts of not changing the oil in time: 1. It will cause the engine noise to increase. 2. It will lead to accelerated wear of internal components. 3. It will reduce the engine's service life. 4. The sealing and cleaning effects will be diminished. Additional information: The method for changing the oil is: 1. Lift the car, remove the underguard, and place a container under the drain plug. 2. Unscrew the drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug after draining and wipe it with a tissue to check for leaks. 3. Reinstall the underguard, lower the car, and add oil through the filler port.
20
3
Share

How Long Can a Bulging BMW Run-Flat Tire Last?

If a BMW run-flat tire bulges, it is recommended to replace it immediately as a bulging tire cannot continue to be used. Tires are a crucial component of a vehicle, being the only part that makes direct contact with the road. They play a vital role in the vehicle's driving stability and safety. Tires are made of rubber, and rubber products will age over time with prolonged use. Below are some considerations when purchasing and using tires: 1. When buying tires, always check the production date: Avoid purchasing tires with production dates that are too old. Even if unused, rubber tires will still age. 2. Regularly inspect tire pressure and the tire surface for any damage during daily use: The sidewalls of tires are relatively fragile, and if they are cut or punctured, they cannot be repaired. It is advisable for car owners to replace their tires every four years, even if the mileage driven within that period is low.
14
5
Share

How to Deal with Yellowing Plastic Headlight Covers?

Here are solutions for yellowing plastic headlight covers: 1. Car owners can regularly maintain their vehicles by cleaning dirt and dust from the headlight surfaces. Use a clean soft cloth to wipe them, and you can also prepare soapy water to wash the headlights, which helps remove surface contaminants, oil stains, and other attachments to prevent yellowing. 2. Sand the headlights with sandpaper, then polish them with specialized wax. 3. Apply tape around the edges of the headlights, then sand them with varying grits of sandpaper step by step. Finally, use professional tools to apply a protective film. Additional Information: The reason for yellowing plastic headlight covers is prolonged exposure to sunlight. Modern car headlight covers are made from polycarbonate plastic through compression molding. This type of plastic is sturdy and transparent, but it is also prone to oxidation and aging.
11
2
Share

Which Type of Car Fire Extinguisher is Better?

Due to the less-than-ideal storage conditions for fire extinguishers in vehicles, it is recommended to choose either a dry powder fire extinguisher or a water-based fire extinguisher. According to national regulations, the minimum filling capacity for vehicle fire extinguishers is one kilogram. When purchasing a vehicle fire extinguisher, it is sufficient to choose one with a capacity of 1-3 kilograms. Below are the instructions for using a dry powder fire extinguisher: 1. Before use, shake the extinguisher thoroughly several times to ensure the dry powder inside is loosened. 2. Remove the safety pin, hold the nozzle with your hand (or support the bottom of the bottle if it is a tubeless fire extinguisher), and aim the nozzle at the base of the flame. 3. Press the handle of the extinguisher firmly, and the dry powder will be discharged from the nozzle.
13
1
Share

Is there a penalty for driving with one broken headlight?

Driving with one broken headlight is subject to penalties. According to Article 58, Section 17 of the Road Traffic Safety Regulations, operating a motor vehicle with incomplete safety facilities or components that do not meet technical standards, thereby posing safety hazards, will result in a fine. Below is relevant information about automotive lights: 1. Position lights (also called parking lights): Position lights indicate the width of the vehicle. Similarly, a circle represents the light, and horizontal lines represent the light beams, which spread to both sides. These are typically used during dusk when night is just falling. 2. Front and rear fog lights: A circle represents the light, horizontal lines represent the light beams, and curved lines represent fog. Since fog limits visibility, the symbol shows curved lines blocking the light beams. Light beams in front represent front fog lights, while those at the rear indicate rear fog lights. These are usually used during rain, fog, or snow. In extreme weather conditions, it's best to turn on fog lights rather than hazard warning lights.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.