Where is the OBD port of Dongfeng Citroen C5?

1 Answers
VonSadie
07/29/25 8:29am
Dongfeng Citroen C5's OBD port is located inside the center console next to the gear shift lever. OBD stands for On-Board Diagnostics in Chinese, which is a diagnostic port that connects the computer to the vehicle's diagnostic system. Through OBD, the working conditions of the engine, sensors, emission control system, fuel system, EGR, and other systems can be monitored in real-time. The Citroen C5 is a mid-size car under Dongfeng Citroen, with a body length, width, and height of 4825mm, 1860mm, and 1480mm respectively, a wheelbase of 2815mm, a top speed of 215km/h, and a body structure of a 4-door, 5-seater sedan.
Was this review help?
20
4
Share
More Forum Discussions

What is PVC on a car?

Automotive instrument PVC refers to the instrument panel made of PVC material in a car. Below is relevant information: 1. PVC: PVC is the abbreviation for polyvinyl chloride material, which is primarily composed of polyvinyl chloride resin with the addition of appropriate amounts of anti-aging agents, modifiers, etc. It is processed through mixing, calendering, vacuum forming, and other techniques. 2. Characteristics: PVC material is lightweight, heat-insulating, thermal-insulating, moisture-proof, flame-retardant, and easy to construct. It comes in various specifications, colors, and patterns, making it highly decorative. It can be used for interior wall and ceiling decorations and is one of the most widely used decorative materials among plastic materials. 3. Advantages: It is lightweight, heat-insulating, thermal-insulating, moisture-proof, flame-retardant, acid and alkali-resistant, and corrosion-resistant. It has good stability and dielectric properties, is durable, anti-aging, and easy to weld and bond. It has strong bending strength and impact toughness, with high elongation at break. It can be easily processed into various shapes through kneading, mixing, sheeting, pelletizing, extrusion, or die-casting, meeting the needs of various profile specifications.
4
3
Share

Can a 15A fuse be replaced with a 20A one? Will it have any impact?

Replacing a 15A fuse with a 20A one will have consequences. Here are the relevant details: 1. Introduction: A 15A automotive fuse can supply 12V current. A 15A automotive fuse means the fuse can handle up to 12V voltage, with a maximum power consumption of 180W for electrical appliances. For 24V systems, it means the fuse can handle up to 24V voltage, with a maximum power consumption of 120W for electrical appliances. 2. Precautions: When replacing a fuse, always choose the correct amperage rating. Do not arbitrarily increase the current specification of the fuse, and never use an iron wire as a substitute.
15
5
Share

How many more years can a 15-year-old car be driven?

Currently, there is no mandatory scrapping period for household vehicles. Here are the relevant details: 1. Regulations: Small vehicles require an inspection every two years within the first six years without the need for an on-site check. For vehicles older than six years, an annual inspection is required. Vehicles older than 15 years must undergo an inspection every six months. Theoretically, as long as the vehicle passes the inspection, it can continue to be driven. 2. Considerations: For a car that has been driven for 15 years, many rubber components, wiring, and pipelines may show signs of aging. Many vehicles may experience oil leakage due to aging valve cover gaskets, which can be resolved by replacing them. Additionally, the stabilizer bar and tie rod ends are prone to aging over time, which can lead to unusual noises.
9
5
Share

Where Does Car Refrigerant Usually Leak From?

Car air conditioning refrigerant leaks usually occur at the air conditioning pipe joints, expansion valve, compressor, evaporator box, and other locations. Below is additional information: 1. Components: A car air conditioning system is generally composed of the compressor, electromagnetic clutch, condenser, evaporator, expansion valve, receiver-drier, pipes, condenser fan, vacuum solenoid valve, idle speed controller, and control system. 2. Working Principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the refrigerant's temperature and pressure rise, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy into a liquid. When the liquid refrigerant flows through the throttling device, its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the cabin air passing through the evaporator, causing it to evaporate into a gas. The gas is then drawn back into the compressor to begin the next cycle.
7
2
Share

What are the harms of rain repellent to glass?

Rain repellent does not harm glass. Here is relevant information about rain repellent: Function: Rain repellent forms a nanofilm on the glass, which has hydrophobic properties and effectively prevents the formation of a water film that can blur vision. Generally, it has no side effects. Performance guarantee: It not only provides 100% anti-fog effect on car glass but also prevents aging and oxidation. Environmental performance: The material used is an eco-friendly product, non-toxic, odorless, non-corrosive, and highly concentrated, requiring only 2 milliliters per square meter. Cleaning performance: It can clean stains on the glass surface, making the glass more transparent and brighter.
19
2
Share

What is the engine of the Peugeot 5008?

The Peugeot 5008 is equipped with either a 1.6T or 1.8T engine, both of which were jointly developed by the PSA Group and BMW. Previously, it used Chery's third-generation engine. The new engines boast a thermal efficiency exceeding 37%, delivering excellent performance in terms of power. The Peugeot 5008 has body dimensions of 4670 mm in length, 1855 mm in width, and 1650 mm in height, with a wheelbase of 2840 mm, making it a mid-size SUV. The front suspension of this vehicle uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.