···
Log in / Register

Where is the OBD port of Changan Oliway?

4 Answers
AriannaLee
07/29/25 4:14pm

The OBD port of Changan Oliway is located below the left side of the steering wheel, above the brake pedal. OBD, also known as On-Board Diagnostics, can monitor the working conditions of the engine's electronic control system and various functional modules during vehicle operation. Taking the 2015 Changan Oliway as an example, its body dimensions are: length 3800mm, width 1700mm, height 1680mm, with a wheelbase of 2505mm and a fuel tank capacity of 40 liters. The 2015 Changan Oliway is equipped with a 1.2L naturally aspirated engine, with a maximum power of 66kW and a maximum torque of 117Nm, paired with a 5-speed manual transmission.

Was this review help?
20
0
Share
ArianaFitz
08/15/25 4:48am

I often help people locate the OBD interface in the Changan Oliway. It's hidden under the dashboard on the driver's side, right in front of your knees. To be specific, after sitting in the driver's seat, lean forward or look down slightly, and you'll see a small square hole on the panel to the left of the steering wheel near your legs. It's usually labeled with "OBD" or "Diagnostic Interface" and is a 16-pin black port, possibly covered by a small cap that can be gently pried open. Over my years of driving, I've used this port to connect diagnostic tools for reading fault codes, solving minor issues like engine warning lights multiple times. If you still can't find it, don't panic—check the owner's manual for illustrated instructions. Some models might have slightly different locations, but the Oliway's is quite standard. Always ensure the car is parked and the engine is off before operating to guarantee safety, as unstable voltage can damage the equipment. During regular maintenance, periodically check and clean the interface to prevent dust buildup.

Was this review help?
9
2
Share
Expand All
McMiles
10/12/25 6:34am

When I drove my Changan Oliway, I also looked for the OBD port. It's fixed at the lower part of the dashboard near the driver's seat, just below the knee area to the left of the steering wheel. Last time, I connected a Bluetooth reader to try it out—the port was yellow with a cover that opened easily. Once connected to the phone app, I could check fuel consumption data, which was pretty cool. If you're a newbie and unfamiliar with the location, it's normal. I recommend turning on a light for better visibility when searching, and avoid prying randomly to prevent damaging the wiring. If you can't find it, don't panic—the owner's manual is a great helper, or you can ask at a 4S shop; it'll take just minutes to locate. Remember to operate it only when the car is parked, not while driving. In daily use, this location is convenient and practical, and it even helped me save on repair costs.

Was this review help?
8
5
Share
Expand All
VonManuel
11/25/25 7:37am

As an apprentice assisting in an auto shop, knowing the location of the OBD interface in the Changan Olis is fundamental knowledge. It's positioned at knee height under the dashboard on the driver's side, either directly exposed or covered with a cap. The interface follows the standard 16-pin design, and I can easily connect a diagnostic tool to read faults like excessive exhaust emissions. Always remember to operate with the engine off—safety first. If you can't find it, check the manual's diagram or clean any dust, as dirt buildup can affect the connection. The OBD system is crucial for checking vehicle status during maintenance. For individual users, it's advisable not to frequently plug and unplug devices to avoid interface wear and extend its lifespan. The location is simple and easy to remember, making it beginner-friendly.

Was this review help?
7
5
Share
Expand All
More Forum Discussions

What number should I call if my car is blocked by another vehicle?

If your car is blocked by another vehicle, you can call the following numbers: 1. Call the contact information left by the car owner on the front windshield. 2. Call 110 or 122 (traffic police hotline), provide the license plate number of the obstructing vehicle, and the traffic police will help contact the owner to request moving the car. 3. Call 114, as 114 now offers a car-moving service. Additional Information: 114 is a number information service for users. Traditional services include priority number announcement, voice number announcement, brand inquiry, inquiry transfer, temporary number announcement, enterprise naming, directory inquiry, sorted number announcement, and media extension. Value-added services include 116114 legal advisory, education navigation, health advisory, discount services, chat services, and employment advisory.
17
1
Share

How to Decelerate in Second Gear Without Stalling?

Depressing the clutch while decelerating in second gear will prevent stalling. Below are detailed instructions for shifting without stalling: 1. When downshifting: Follow the technique mantra of 'press (clutch), shift to neutral, release (clutch), add (throttle), press (clutch), engage (lower gear)'. As long as the speed is appropriate, you can skip gears when downshifting. 2. When shifting gears: When upshifting from 1st to 2nd gear, the speed should reach 15-20 km/h; from 2nd to 3rd gear, 25-35 km/h; from 3rd to 4th gear, 35-45 km/h; and from 4th to 5th gear, 45-55 km/h. This also applies to downshifting. 3. Different speeds: When the speed is relatively low, generally within 30 km/h, first press the brake and then the clutch to prevent the engine from stalling due to braking at low speeds. When the speed is higher, above 30 km/h, you need to first press the brake to reduce the speed (to 20-30 km/h) and simultaneously press the clutch to bring the car to a stop.
12
3
Share

How to adjust the time on a Honda Fit?

Here is the method to adjust the time on a Honda Fit: Press the small knob on the instrument panel four times to switch to the time setting page. When the time starts flashing, you can rotate the small knob to adjust the numbers. After adjusting, press the knob once to save the settings. Below is some related information: 1. The car's odometer can display two separate counts: one shows the total mileage of the vehicle, and the other is used for individual counting. You can switch between them using the black button on the instrument panel. 2. The Honda Fit is positioned as a compact car, with dimensions of 4096 mm in length, 1695 mm in width, and 1525 mm in height, and a wheelbase of 2530 mm. In terms of power, the Fit is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or CVT transmission. It delivers a maximum power of 96 kW, a maximum horsepower of 131 HP, and a maximum torque of 155 Nm.
11
2
Share

Which region does the Xin 0 license plate belong to?

Xin 0 is the license plate for Xinjiang. Here is some extended information about license plates: 1. The main function of a license plate is to identify the province, city, or county to which the vehicle belongs. The vehicle management office can trace the owner of the vehicle through the license plate. 2. The motor vehicle license plate number consists of the registration authority code and the plate number. The plate number is composed of 5 characters, which can be Arabic numerals or a combination of Arabic numerals and English letters. There are 10 Arabic numerals from 0 to 9 and 26 English letters from A to Z. Blue plates are for ordinary small vehicles, yellow plates are for ordinary large vehicles, and black plates are used by foreign investors in China or important figures.
3
5
Share

What is the first maintenance mileage for Nissan Sylphy?

The first maintenance for Nissan Sylphy is at 1,000 kilometers. The main tasks during the first maintenance include changing the engine oil and oil filter. Engine oil, which is the lubricant for engine operation, plays a crucial role in lubricating, cleaning, cooling, and sealing the engine. It significantly reduces wear on engine components and extends their service life. During engine operation, the oil filter is responsible for filtering out metal shavings produced by friction between parts and oxides from the air intake. Here is some additional information: The Nissan Sylphy is a new strategic model launched globally by Nissan. The car measures 4,631 mm in length, 1,760 mm in width, and 1,503 mm in height, with a wheelbase of 2,700 mm.
13
5
Share

Why does the motorcycle keep stalling when starting?

Motorcycle stalling after starting can be caused by the following reasons: 1. Running out of fuel. When the motorcycle stalls while riding, the first thing to check is whether the fuel is exhausted. 2. Fuel supply failure. If the motorcycle stalls due to fuel supply issues, you may notice a gradual loss of power before it stalls completely. 3. Engine overheating. Overheating can cause poor lubrication, leading to piston and cylinder seizure, which also results in engine stalling. Signs before stalling include a gradual decrease in power followed by a sudden stop. Solutions for motorcycle stalling after starting are as follows: 1. Adjust the air-fuel mixture slightly by turning it out 1.5 turns and try increasing the idle speed appropriately. 2. Clean or adjust the air-fuel mixture screw (requires a professional mechanic) and the idle speed screw. 3. Remove the air filter to see if the stalling stops. If it does, the issue is insufficient air intake due to a clogged air filter, and replacing the air filter element will solve the problem. 4. Cold start refers to starting the engine when the coolant temperature is low, usually after the motorcycle has been inactive for a long time (such as overnight parking).
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.