Where is the OBD port located on the Wuling Zhiguang?

1 Answers
PaisleyLee
07/30/25 12:59am
There are two possible locations for the OBD port on the Wuling Zhiguang: 1. One location is next to the blower above the accelerator pedal; 2. The other location is under the dashboard on the passenger side. Below is some relevant information about the Wuling Zhiguang's OBD: 1. OBD stands for On-Board Diagnostics, which means the vehicle's automatic diagnostic system in Chinese. 2. This system can monitor the working conditions of the engine's electronic control system and other functional modules of the vehicle in real-time while the car is running. If any abnormal conditions are detected, it will determine the specific fault according to a specific algorithm and store it in the system's memory in the form of a Diagnostic Trouble Code (DTC).
Was this review help?
5
5
Share
More Forum Discussions

Which is better, 94V or 94W tires?

The differences between 94V and 94W tires are as follows: Different speed ratings: Speed rating V indicates a maximum tire speed of 240 km/h, while speed rating W indicates a maximum tire speed of 270 km/h. This means the speed rating W is higher than V, implying that W's performance is superior to V. Different prices: Since 94W tires are better than 94V, the price of 94W is also higher than that of 94V. Users should choose tires based on their vehicle's specifications. Tires with different speed ratings also have different applicable ranges: Q-T rated (maximum speed 160-190 km/h) are suitable for small and compact cars, U-V rated (maximum speed 200-240 km/h) are suitable for mid-to-high-end cars, and W-Z rated (maximum speed 240-300 km/h) are more commonly used in large luxury cars and supercars.
2
5
Share

Can pickup trucks drive in urban areas?

Most cities allow pickup trucks to enter urban areas, but some areas may have time-based traffic restrictions. The following is an introduction to the nationwide deregulation of pickup trucks: Road deregulation: This means maintaining the commercial vehicle attribute of pickup trucks, but allowing them to drive on roads that were previously prohibited. However, they still cannot enjoy the same privileges as passenger vehicles, such as toll-free highways. Vehicle type deregulation: This means classifying pickup trucks as passenger vehicles, although it will still take a considerable amount of time for testing. If officially implemented, pickup trucks will be completely classified as passenger vehicles.
16
3
Share

Is it good to install a central control screen in low-end models?

Installing a central control screen in low-end models is beneficial. It not only displays driving information and enhances the vehicle's human-machine interaction system but also provides real-time updated navigation functions, offering precise driving routes. However, aftermarket central control screens may not match as well as factory-installed ones, potentially appearing visually abrupt or inconsistent. Below is an introduction to central control screens: Display Screen: The central console LCD screen is an LCD display located in the middle of the dashboard. It can show basic information such as time, temperature, date, and audio. Multifunctional: It serves as the information display device for the multimedia control system, including electronic navigation systems and reverse assistance system screens. It can also function as a display for in-car TVs and DVDs.
18
1
Share

What are the pros and cons of ECU remapping?

The pros and cons of ECU remapping are as follows: Pros of ECU remapping: Significant improvement in power output. For naturally aspirated models, there will be a 5%~10% increase, while turbocharged models can see up to a 30% improvement, which is very noticeable for turbocharged engines. Cons of ECU remapping: Higher fuel quality requirements. Originally, 92-octane gasoline may have been sufficient, but after ECU remapping, 95-octane gasoline is required, and fuel consumption may also become abnormally high. Higher engine temperature requirements. Since the engine operates in an overclocked state after ECU remapping, the original cooling system may no longer meet the engine's heat dissipation needs, leading to potentially fatal damage from overheating.
10
4
Share

Where is the grounding point of a car?

The grounding point of a car: It is located next to the battery on the left side of the car engine. Here are the precautions for car grounding: When grounding is needed: When the vehicle cannot be started by pressing the one-button start or using the key, and repeated attempts fail to start normally, jumper cables are required for rescue. Correct grounding operation: The rescue vehicle should approach the front of the dead vehicle (to avoid insufficient length of the jumper cables due to excessive distance); Ensure all electrical devices of the dead vehicle are turned off, as electrical devices can drag the engine to start, requiring a larger starting current; Jumper cable connection method: Connect positive to positive and negative to negative.
2
2
Share

What is the top speed of the Aprilia RS660?

The top speed of the Aprilia RS660 is approximately 160km/h. Advantages: The most outstanding feature of the RS660 is its very comfortable riding position, possibly inspired by the RSV4, making the riding posture a balanced average between a sports bike and a touring bike, ensuring no continuous pressure on the wrists, knees, back, and neck. Electronic features: The RS660 uses the latest generation Marelli 11MP ECU, replacing the 7SM used in the RSV4 and Tuono. This ECU controls throttle assistance, lean angle assistance, auto-canceling turn signals, and more. Three riding modes: These are STREET, SPORT, and Custom modes, which can be adjusted according to the rider's needs. Additionally, it offers three power delivery curves, engine braking, cornering ABS, 8-level traction control, cruise control, and PIT lane speed limiter settings for adjustment.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.