···
Log in / Register

Where is the OBD port located on the Changan Xinbao?

1 Answers
LaNevaeh
07/24/25 10:27pm

Below the left side of the steering wheel, above the clutch and brake pedals, there is a cover marked with "OBD". Pull the cover downward to open it, and you will find a vehicle diagnostic connector inside, which is the OBD port of the Changan Xinbao. Here are some details about the Changan Xinbao: 1. The Changan Xinbao is a light truck product under the Changan brand, developed based on the Changan Commercial platform. It features mature technology and excellent performance. 2. In terms of exterior design, it adopts a family-style front face, continuing Changan Commercial's simple and robust style. Regarding load capacity, the Changan Xinbao inherits the "high load-bearing" performance of its predecessor while making several improvements, such as increasing the number of rear wheels, widening the cargo box, and adjusting the gearbox ratio and rear axle ratio. For power, the Changan Xinbao is equipped with a new National V-compliant engine, known for its stability, sufficient power, and low fuel consumption, making it a truly "high-efficiency engine".

Was this review help?
8
0
Share
More Forum Discussions

What is the difference between 1.6T and 2.0T engines in cars?

1.6T and 2.0T differences introduction: 1. Maintenance cost: The 2.0T engine requires larger turbochargers or higher turbo pressure, resulting in higher operating temperatures and pressures during engine operation. This necessitates the use of engine oil with better high-temperature resistance. Additionally, the 2.0T engine has higher demands on the cooling system, whether for air cooling or coolant cooling. Undoubtedly, the maintenance cost of the 2.0T engine is higher than that of the 1.6T in the long run. 2. Engine power: The 2.0T engine delivers stronger power with greater torque and horsepower output. However, turbocharged engines also have a drawback - insufficient power reserve compared to naturally aspirated engines. Due to limitations in boost pressure, turbocharged engines often experience power deficiency in high RPM ranges, lacking sustained acceleration capability.
16
5
Share

Is it necessary to install seat cushions in Mercedes-Benz cars?

It is necessary to install seat cushions in Mercedes-Benz cars. Here is an introduction to Mercedes-Benz related content: 1. Mercedes-Benz SAM: The control unit, also known as the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing a safety hazard. 2. Mercedes-Benz: A German automobile brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, rigorous quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automobile and brand logos in the world. Mercedes-Benz cars not only have unparalleled quality but also a comprehensive range of models. Currently, it mainly produces A-Class cars, C-Class cars (mid-range sedans and sports cars), E-Class cars (high-end sedans and sports cars), S-Class cars (luxury sedans and sports cars), and G-Class vehicles (SUV off-road vehicles).
10
4
Share

What Causes a Mercedes-Benz to Fail to Start with All Dashboard Lights On?

Here are the reasons why a Mercedes-Benz fails to start with all dashboard lights on: 1. Frozen exhaust pipe: This situation is prone to occur in vehicles with very low usage frequency, such as those used for very short commutes between home and work. The water vapor from engine combustion freezes at the muffler of the exhaust pipe. If the ice from yesterday's short trip hasn't melted and today's ice forms again, it affects exhaust, and in severe cases, the vehicle cannot start. 2. Insufficient ignition energy: Poor working condition of the ignition system, especially in cold weather when the intake air temperature is low, leads to inadequate fuel atomization in the cylinders. Combined with insufficient ignition energy, this results in cylinder flooding, where excessive fuel accumulates in the cylinders, exceeding the ignition limit concentration and preventing the engine from starting.
4
4
Share

Why is the Mercedes-Benz car constantly making noise?

Here are the reasons why a Mercedes-Benz car may constantly make noise: 1. Normal noise: Due to the direct injection engine, the fuel injection pressure is more than ten times that of a regular engine. When the fuel injector operates under high pressure, it produces vibrations, resulting in a ticking sound from the engine. This is a normal condition. 2. Abnormal noise: The engine mount rubber may be aging or loose. The engine mount rubber is the rubber block placed between the engine and the frame, primarily to reduce the vibration and cushioning during engine operation, and to secure the engine. If the engine mount rubber becomes aged or loose, it can cause the engine to shake, and in severe cases, produce a 'ticking' noise. In such cases, the engine mount rubber needs to be replaced.
5
4
Share

Where is the windshield washer spray on a Mercedes-Benz?

Mercedes-Benz windshield washer spray switch is located on the wiper control stalk on the right side of the steering wheel. Here is some related information about Mercedes-Benz: 1. Mercedes-Benz SAM: The control unit, which stands for Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and wipers cannot be controlled while driving, posing safety risks. 2. Mercedes-Benz: A German automotive brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical standards, rigorous quality benchmarks, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automotive and brand symbols globally. Mercedes-Benz cars not only boast unparalleled quality but also offer a comprehensive range of models, currently producing mainly A-Class (compact cars), C-Class (mid-range sedans and coupes), E-Class (premium sedans and coupes), S-Class (luxury sedans and coupes), and G-Class (SUV off-road vehicles).
12
2
Share

Does the new BMW 4 Series have a four-door version?

The new BMW 4 Series has a four-door version, which is called the Gran Coupe. The BMW 4 Series Gran Coupe is equipped with two engines: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. Here are the specific details: 1. The low-power version of the 2.0-liter turbocharged engine has a maximum power of 184 horsepower and a maximum torque of 270 Nm, delivering maximum power at 5,000 rpm and maximum torque between 1,350 and 4,600 rpm. 2. The new BMW 4 Series is an intermediate car series produced by BMW, a premium coupe that combines convertible and coupe elements, available as the 428i, 428i xDrive, and 435i with gasoline engines, and the 420d with a diesel engine.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.