Where is the OBD port located on a Chery QQ?

What Causes the Smell of Gasoline When Turning on the Heater?

The reasons for smelling gasoline when turning on the heater include: saturated or failed carbon particles in the charcoal canister, exhaust leakage from the external engine, a dirty air filter, and mold in the air conditioning ducts and evaporator. Details are as follows: Saturated or failed carbon particles in the charcoal canister: This allows fuel vapors from the tank to escape into the atmosphere and then be drawn into the cabin. Exhaust leakage from the external engine: Foreign objects at the air intake can cause unpleasant odors to enter through the air conditioning intake. It is advisable to use the external circulation mode when turning on the heater. Dirty air filter: The car's air filter should be cleaned regularly to filter out harmful gases. Mold in the air conditioning ducts and evaporator: This type of repair is relatively troublesome and costly. Precautions when using the heater: Do not keep the heater on while sleeping in the car, as this can easily lead to carbon monoxide poisoning; after turning on the heater, the car becomes a confined space, which provides an ideal environment for bacterial growth and spread. Therefore, it is best to partially open the window to allow some air circulation, which can prevent the car from becoming too dry and improve the air quality inside.

10

1

Share

What are the symptoms of a faulty truck brake master cylinder?

Truck brake master cylinder symptoms are as follows: 1. Brake pedal does not return: The cause of this issue may be oil leakage in the master cylinder or wheel cylinder, or a malfunction in the master cylinder or wheel cylinder causing the pedal to sink. Additionally, it could be due to wear, lack of lubrication, or damage in one of the axle bearings. If the bearing is damaged, the entire vehicle may become uncoordinated. The brake pads may be in an incorrect position, causing the brake pedal not to return. 2. Brakes become too hard or too soft: It is normal for the brake pedal to feel hard when the vehicle is stationary because the vacuum booster is not yet operational. If the pedal remains hard after the vehicle is started, it may indicate a vacuum hose leak or a faulty vacuum pump. If the brakes feel soft while driving, this suggests there is air in the brake fluid lines or a brake fluid leak, requiring immediate roadside stopping and professional repair. 3. Steering wheel pulls to one side during braking: While braking, due to the high speed of the brake disc, it may be difficult to notice uneven braking. However, as the vehicle comes to a stop, the difference becomes more apparent. The wheel on the faster side stops first, causing the steering wheel to pull. This occurs due to an imbalance in the brake system's wheel cylinders acting on the brake pads, and the wheel cylinder should be replaced promptly.

15

3

Share

How Many Times Should a Motor Vehicle Be Inspected Annually After 15 Years?

Motor vehicles should be inspected twice a year after 15 years. Annual inspection time requirements: Small and micro non-operational passenger vehicles are exempt from inspection for the first 6 years, inspected once a year after 6 years, and once every 6 months after 15 years; operational passenger vehicles should be inspected once a year within 5 years and once every 6 months after 5 years; trucks and large and medium non-operational passenger vehicles should be inspected once a year within 10 years and once every 6 months after 10 years; imported vehicles are the same as other models and can undergo regular inspections at any inspection site. Consequences of not complying with annual inspection regulations: Vehicles that fail the regular inspection must be repaired within the specified time. If they still fail after the deadline, the vehicle management authority has the right to confiscate the license plates and driving licenses of the unqualified vehicles, and the vehicles will not be allowed to drive on the road or be transferred; vehicles that cannot participate in the regular inspection due to special reasons should apply for an extension in advance to the vehicle management authority; vehicles stationed abroad can be inspected by the local vehicle management authority, and the inspection results will be notified to the original vehicle management authority; vehicles that do not participate in the regular inspection without reason are not allowed to drive on the road.

19

0

Share

Should You Engage the Handbrake or Shift to Neutral First When Exiting the Car?

When exiting the car, you should first engage the handbrake and then shift to neutral. Generally, it is recommended to engage the handbrake before shifting to P (Park) to minimize damage to the vehicle and extend its lifespan. Important Notes: Prolonged use of the handbrake can cause the steel cable to undergo plastic deformation. Since this deformation is irreversible, long-term use may reduce the handbrake's effectiveness and increase its travel distance. The handbrake system also includes a return spring. When the handbrake is engaged, the spring stretches; when released, it returns to its original length. Over time, the spring may also deform due to prolonged use. Parking Procedure Sequence: After the car comes to a complete stop, first engage the handbrake, then shift to neutral, release the clutch, and finally release the brake pedal, turn off the turn signal, shut off the engine, depress the clutch, and shift into first gear. Engaging the handbrake secures the car in place. Shifting to neutral ensures the car won't move or stall when the engine is started. Releasing the clutch first prevents the car from moving if the clutch is released without shifting to neutral, especially if the handbrake isn't engaged or the brake pedal isn't pressed. After shutting off the engine, shifting into first gear acts as an additional safety measure to prevent the car from moving in case the handbrake fails or the slope is too steep, as the gear will lock the car in place.

9

1

Share

Is it harmful to the car to park in P gear without turning off the engine?

Parking in P gear for a long time without turning off the engine is harmful to the car because the P gear locks the gears of the transmission, which can cause impact on the transmission. In severe cases, it may damage the gears and lead to transmission failure. Here are specific details about gear shifting: 1. Key points of gear shifting: Generally, the right hand should face downward to perform the shifting operation. The shifting action should be clean and decisive, while paying attention to technique and avoiding brute force. Look for the engagement point. When shifting, the clutch must be fully depressed. If the clutch is not fully depressed before engaging or is released too early, the gear lever will be heavy regardless of the gear, and forcing it with brute strength can damage the gears, produce loud noises, and may even cause the engine to stall. 2. Precautions for gear shifting: (1) Start in first gear: Whether it's the initial start or a restart after stopping (e.g., at a red light), as long as the vehicle moves from a standstill, the gear should remain in first gear. (2) Smooth shifting: The force during shifting should be steady. Shifting should only occur when the vehicle's speed (RPM) meets the requirements of the target gear. (3) Sequential shifting: Whether shifting up or down, it should be done one gear at a time. If a wrong gear is engaged (e.g., accidentally shifting from 2nd to 5th instead of 3rd), immediately return to the original gear and shift again.

5

4

Share

How to Adjust a Steering Wheel that is Slightly Tilted to the Right?

Solutions for a steering wheel tilted to the right: 1. If the steering tie rod is at the front, adjust it at the left and right tie rods of the steering gear. For the right wheel, extend the tie rod inward, and for the left wheel, shorten it outward. 2. If the steering tie rod is at the back, for the right wheel, shorten the tie rod inward, and for the left wheel, extend it outward. 3. If the steering wheel is off by just one spline tooth, you can remove the steering wheel and rotate it by one tooth angle. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft.

6

3

Share

Where is the OBD port located on a Chery QQ?

What Causes the Smell of Gasoline When Turning on the Heater?

What are the symptoms of a faulty truck brake master cylinder?

How Many Times Should a Motor Vehicle Be Inspected Annually After 15 Years?

Should You Engage the Handbrake or Shift to Neutral First When Exiting the Car?

Is it harmful to the car to park in P gear without turning off the engine?

How to Adjust a Steering Wheel that is Slightly Tilted to the Right?

Do you need to release the accelerator when shifting to S mode?

What Causes Rough and Jerky Manual Transmission Shifting?

What is the function of seat belts?

Which Department to Contact When Being Defrauded in Buying a Used Car?