···
Log in / Register

Where is the OBD interface of Karry Youjin located?

4 Answers
StOlivia
09/01/25 8:01am

The OBD interface of Karry Youjin is located slightly above the clutch pedal. The interface adopts a standardized trapezoidal 16-pin DLC connector, designed to prevent incorrect insertion. If the device interface is oriented incorrectly, it cannot be inserted, thereby avoiding short circuits or other issues that could affect vehicle usage. Below is an introduction to Karry Youjin: 1. The stylish front face combines modernity and stability, achieving harmony and unity. It integrates seamlessly with the Karry logo, presenting an elegant and dignified appearance. The honeycomb U-shaped grille and radiator mesh design enhance ventilation and cooling efficiency. The wing line extending from the grille to the engine hood effectively outlines the three-dimensional and layered feel of the entire hood, complemented by the large front windshield, giving the vehicle a smooth and grand appearance. The overall design exudes a more imposing presence, breaking free from the cramped and oppressive feel of traditional microvans and adding a strong contemporary vibe. 2. Karry Youjin is an improved single-row extended micro-truck based on the Karry Youyou model. With a sturdy chassis and body structure design, a cargo compartment length of 2.5 meters, the widest cabin among micro-trucks at 1.6 meters, and a 5-leaf spring rear suspension, it boasts a payload capacity of up to 980kg, fully meeting production demands.

Was this review help?
8
3
Share
LeLyla
09/14/25 3:44am

As a frequent driver, I can tell you that the OBD port of the Karry Youjin is usually located under the driver's seat. To be more specific, it's in the lower left corner of the dashboard or below the steering wheel. Just bend down and reach out to find a small square socket. This port serves as the entry point for connecting diagnostic tools to read vehicle fault codes, making it convenient for troubleshooting engine issues. I often use it in my daily driving, such as when fuel consumption seems abnormal—I plug in the tool for self-checking, saving time on trips to the repair shop. The design keeps it out of the way while driving, but note that its position might sometimes be covered; a quick dust cleaning ensures smooth usage. It's best to turn off the engine during operation to prevent accidental short circuits, and protect the port pins from static damage—good habits extend vehicle lifespan. Remember, the car manual includes a detailed diagram for reference on the exact location.

Was this review help?
9
5
Share
Expand All
DeJackson
10/28/25 4:25am

I'm super interested in vehicles. The OBD port of the Karry Youjin is precisely located under the dashboard near the left knee area. Just look down and you'll spot that 16-pin small hole. The position is quite standard, designed with easy access and anti-misoperation in mind. Plugging in a scan tool to read fault codes is particularly practical. I often discuss such details in car enthusiast circles – the interface location usually affects usage frequency, so I recommend keeping it clean and unobstructed. Playing with OBD devices allows real-time engine data monitoring to adjust driving habits and reduce fuel consumption. Even beginners can try simple diagnostics to ensure the vehicle maintains good operating condition. It's good to explore these details while driving normally – it deepens vehicle understanding, boosts safe driving confidence, and helps avoid sudden trouble.

Was this review help?
5
1
Share
Expand All
OLevi
12/11/25 4:42am

I just got my driver's license and was quite confused when looking for the OBD port on the Karry Youjin. It's actually located at the bottom left side of the driver's seat, under the dashboard—a small socket that's easy to overlook. I had to bend down and use a flashlight to find it. The low design is intended to make it easier to connect tools. Don't worry, just take your time and look carefully. New drivers shouldn't be afraid to use OBD devices for reading codes—it's a simple operation. Remember to turn off the engine before connecting to prevent accidents. Don't cover the port or let dust accumulate, as it can affect contact. Clean it regularly to ensure it works properly. Once you find it, remember its location for future needs. Safety first!

Was this review help?
3
0
Share
Expand All
More Forum Discussions

Where is the ESP switch on the Audi A4L?

The ESP switch on the Audi A4L is located below the air conditioning screen on the center console. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of: length 4858mm, width 1847mm, height 1439mm, wheelbase 2908mm, fuel tank capacity 56L, and curb weight 1610kg. The 2020 Audi A4L features a five-link independent front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine delivering maximum horsepower of 150PS, maximum power of 110kW, and maximum torque of 270Nm, paired with a 7-speed dual-clutch transmission.
12
4
Share

How many kilometers can 100 liters of fuel run?

Taking a 1.6L displacement vehicle as an example, 100 liters of gasoline can approximately travel 1,667 kilometers on long-distance journeys. Below is relevant information about engine oil: 1. Introduction: Engine oil, also known as engine lubricant, with a density of approximately 0.91×10³ (kg/m³), serves multiple functions for the engine including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of automobiles. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the shortcomings of the base oil, imparting new characteristics, making them an essential part of lubricants. 2. Classification: Engine oils on the market can be broadly categorized into mineral oils and synthetic oils based on their base oil composition (vegetable oils are not considered due to their scarcity). Synthetic oils are further divided into full synthetic and semi-synthetic types.
7
4
Share

Where is the headquarters of Changan Mazda located?

The headquarters of Changan Mazda is located in Nanjing, China. The models under Changan Mazda include: Mazda CX-3, Mazda CX-5, Mazda CX-8, Mazda 2, Mazda Axela, etc. Taking the 2020 Mazda Axela as an example, it belongs to the compact car category with body dimensions of: length 4662mm, width 1797mm, height 1445mm, wheelbase of 2726mm, and a fuel tank capacity of 50L. The 2020 Axela features a front suspension with MacPherson independent suspension and a rear suspension with torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 117PS, maximum power of 86kW, maximum torque of 148Nm, and is paired with a 6-speed manual transmission.
17
1
Share

Can a BMW still be driven with low tire pressure?

BMW cannot be driven with low tire pressure. BMW models include the BMW X1, BMW X2, BMW X3, BMW X4, BMW X6, etc. Taking the 2021 BMW X1 as an example, it is a compact SUV with body dimensions of: length 4565mm, width 1821mm, height 1620mm, and a wheelbase of 2780mm. The 2021 BMW X1 features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 140PS, a maximum torque of 220Nm, and a maximum power of 103kW, paired with a 7-speed dual-clutch transmission.
19
4
Share

What is the reason for the triangle with an exclamation mark lighting up in a car?

The reasons for the triangle with an exclamation mark lighting up in a car are: 1. Overheating of the dry dual-clutch transmission clutch; 2. Intervention or malfunction of the fuel cut-off system; 3. Parking sensor failure; 4. External light failure; 5. Engine oil pressure sensor failure; 6. Traction control system warning or malfunction. The triangle with an exclamation mark lighting up in a car is a general fault indicator, and the solutions are: 1. Check if the engine oil pressure sensor is malfunctioning; 2. Check if the traction control system is malfunctioning; 3. Check if the fuel cut-off system is malfunctioning; 4. Check if the dry dual-clutch transmission is overheating.
10
5
Share

What is the normal idle speed for a cold engine?

A cold engine idle speed of 700 to 800 RPM is normal. The reasons for excessively high idle speed are: 1. The idle switch does not close; 2. Faulty idle control valve; 3. Intake pipe leakage; 4. Incorrect valve timing; 5. Fuel injector dripping or clogging; 6. Exhaust system blockage; 7. EGR valve opening during idle conditions. Solutions for excessively high idle speed: 1. Adjust or replace the throttle position sensor; 2. Clean or replace the idle control valve and use a diagnostic tool to perform a basic idle speed setting; 3. Locate the leakage point, reseal or replace the relevant components; 4. Check the timing marks and readjust the valve timing according to standards; 5. Clean and inspect each fuel injector's spray volume to ensure no clogging or dripping; 6. Replace the three-way catalytic converter; 7. Remove carbon deposits from the EGR valve or replace the EGR valve.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.