Where is the OBD interface of Foton View?

How often should the brake fluid in the Baojun 510 be changed?

The brake fluid in the Baojun 510 should be changed every 2 years or 40,000 kilometers. Symptoms indicating the need for a brake fluid change include: 1. The brake warning light alerts or flashes during emergency braking or continuous braking; 2. The braking distance becomes noticeably longer than before during emergency braking; 3. The brake pedal feels soft or lacks force when pressed; 4. The braking force feels inconsistent, sometimes light and sometimes heavy. The Baojun 510 is a compact 5-door, 5-seat SUV with dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, with a wheelbase of 2550mm. It is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 73 kW and a maximum torque of 135 Nm.

13

5

Share

How to Reset the Maintenance Reminder on the New Santana?

The method to reset the maintenance reminder on the new Santana is: 1. Turn off the ignition switch; 2. While turning on the ignition switch, press and hold the trip meter hour reset button. After ignition, the reminder message will still be displayed; 3. Within 30 seconds, press and hold the trip meter hour reset button for about 3 seconds, and the reminder message will be completely cleared. Taking the 2021 Santana as an example, its body dimensions are: length 4475mm, width 1706mm, height 1469mm, with a wheelbase of 2603mm. The 2021 Santana is equipped with a 1.5L naturally aspirated engine, with a maximum power of 82kW and a maximum torque of 145Nm, paired with a 5-speed manual transmission.

8

0

Share

Is it necessary to install cruise control in a car?

Cruise control system is not necessary to install. Here are the specific details about the cruise control system: 1. Concept: The cruise control system, also known as the speed control system or auto-driving system, is a speed control device. 2. Main function: After setting the desired speed and turning it on, the system automatically maintains the vehicle speed without the need to press the accelerator pedal, allowing the vehicle to travel at a fixed speed. 3. Usage areas: The cruise control system should be used on highways or fully enclosed roads. It is recommended not to use the cruise control system on other roads. 4. Basic functions: Speed setting - when the speed setting switch is pressed, the current driving speed is stored, and the vehicle maintains this speed; Cancel function - when the brake pedal is pressed, the above functions are immediately disabled, but the set speed remains stored; Resume function - when the resume switch is pressed, the original speed can be restored.

19

1

Share

Where is the oil filter of Peugeot 4008 located?

The oil filter of Peugeot 4008 is located under the intake pipe, and the intake pipe needs to be removed when replacing the oil filter. The oil filter, also known as the oil cleaner, is used to filter out impurities, colloids, and moisture in the oil, delivering clean oil to various lubrication points. The Peugeot 4008 is a 2013 model from Peugeot, a compact SUV, with the Base version being its newly added entry-level model. The Peugeot 4008 is equipped with a 2.0L naturally aspirated engine across the entire lineup, paired with a 6-speed CVT transmission. In terms of body dimensions, it measures 4340mm in length, 1800mm in width, and 1626mm in height, with a wheelbase of 2670mm.

11

1

Share

How to Activate Cruise Control on the Buick GL8?

To activate cruise control on the Buick GL8: 1. Turn on cruise control by sliding the switch to the "ON" position; 2. Set the cruising speed - after the system is activated, press the "SET" button when the vehicle reaches the desired speed. The Buick GL8 is a 5-door, 7-seater MPV with body dimensions of 5238mm in length, 1878mm in width, 1776mm in height, and a wheelbase of 3088mm. It is equipped with a 2.0T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 174 kW and a maximum torque of 350 Nm. The drivetrain is front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.

12

4

Share

What are the steps for installing a car license plate?

The steps for installing a car license plate: 1. After receiving the license plate, there is usually a package of secure screws included. According to relevant regulations, vehicles must now have 4 screws installed on both the front and rear license plates, totaling 8 screw holes. 2. Take out the license plate screws and insert them into the anti-theft caps while rotating them. 3. Position the license plate correctly and align the screws with the four gaps on the bumper, then secure them with a cross-head screwdriver. 4. After tightening, cover the screws with the anti-theft caps and press them gently into place. Car license plates are hard number plates with registration codes issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for plates, as stipulated by national vehicle management regulations. They have a uniform format and style.

6

5

Share

Where is the OBD interface of Foton View?

How often should the brake fluid in the Baojun 510 be changed?

How to Reset the Maintenance Reminder on the New Santana?

Is it necessary to install cruise control in a car?

Where is the oil filter of Peugeot 4008 located?

How to Activate Cruise Control on the Buick GL8?

What are the steps for installing a car license plate?

How wide is the Ford Kuga's body?

How to Fold the Rearview Mirror of Geely Emgrand GS?

What does ACC on the dashboard mean?

What are the substances in engine oil?