Where is the OBD interface located on the Wuling Hongguang?

2 Answers
Joann
07/24/25 5:45pm
The OBD interface of the Wuling Hongguang is located on the left side of the main driver's steering wheel, and you can see it by looking down. More details about the Wuling Hongguang are as follows: 1. The Wuling Hongguang is a microvan under the Wuling brand, which has been well-received by many consumers since its launch. 2. The Wuling Hongguang is equipped with two engines: a 1.5-liter naturally aspirated engine and a 1.2-liter naturally aspirated engine. 3. The engine is paired with a 5-speed manual transmission. The manual transmission is the simplest and most widely used type of transmission, known for its reliability, durability, and low maintenance costs.
Was this review help?
8
2
Share
GrantLee
08/11/25 9:48am
I've been driving the Wuling Hongguang for several years, and the OBD port is mainly located at the lower left corner of the dashboard under the steering wheel, just above the driver's left foot pedal, approximately at knee height. Both old and new models are similar, but for the 2020 model, it might be near the center armrest, requiring you to crouch down a bit to see the 16-pin port. Usually, I connect a Bluetooth diagnostic tool to it to read fault codes, which is quite convenient, especially for checking engine issues before hitting the highway to avoid breakdowns. With a small app installed, you can also monitor fuel consumption and emission data in real-time, saving money and being eco-friendly. If you can't find it, don't force it open; first, check the user manual in the glove box, which has diagrams marking the location, otherwise, you might damage the wiring.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

Is the Windshield Covered by Insurance?

It depends on the type of insurance coverage. If you have comprehensive glass coverage, you can file a claim for damage. Below is some relevant information about windshields: 1. Introduction to Windshields: Windshields were invented in the 1920s when Ford had the idea of sandwiching two pieces of glass with a layer of PVC plastic in between, creating a laminated glass structure. This technology is still in use today. 2. Precautions for Windshield Repair: After replacing the glass, avoid washing the car for two days and try to drive on smooth roads. Before repairing the car glass, thoroughly clean any dirt from the windshield. It is advisable to carefully choose cleaning agents and related products. The defroster should be turned off after 5-10 minutes of use to prevent potential cracking or damage to the rear windshield.
10
4
Share

What is the maximum voltage of a car battery?

The maximum voltage of a single battery is 18V. Below is some relevant information about car batteries: 1. Car battery: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. 2. Car battery maintenance: (1) Avoid frequent vehicle starts. In winter, when the car is difficult to start, do not attempt continuous starts. Continuous starting of the motor will definitely cause excessive discharge and damage to the battery. The interval between restarts should be more than 5 seconds. (2) When the battery has been in use for about two and a half years, routine maintenance should include battery testing to prevent potential issues. Try not to use electrical equipment such as the CD player or cigarette lighter when the vehicle is not running, and minimize the use of various onboard electrical devices while driving.
16
5
Share

How to Change License Plates for ETC?

ETC is an electronic toll collection system, also known as an automatic road charging system. It is a specialized road tolling method used for toll roads, commonly seen on highways, bridges or tunnels with toll policies, and certain sections of city centers to alleviate urban traffic congestion. The steps to change license plates for ETC are as follows: 1. First, cancel the ETC and then reapply for ETC for the vehicle. 2. Bring the ETC device, ETC card, the vehicle owner's ID card, and driver's license to the local ETC customer service center for removal. 3. Use the removal receipt issued by the ETC customer service center to terminate the contract at the signing bank. 4. The bank staff will cancel the ETC. After successful cancellation, the new vehicle will undergo an external inspection for registration and re-registration.
4
5
Share

How Often Should the Lantra Tires Be Replaced?

Under normal driving conditions, Lantra tires should be replaced when they reach the lower limit of usage (60,000 kilometers/3 years). In fact, the lifespan of tires is closely related to many factors, such as climate, road conditions, driving habits, installation, and maintenance. The following situations also warrant tire replacement: 1. Bulging or deformation: Bulging or deformation of tires is extremely dangerous. If such issues are detected, it is advisable to visit a professional repair shop immediately for inspection and handling. In most cases, tire replacement is recommended. Such conditions indicate that the internal metal coils of the tire have been deformed or broken, and continuing to drive could lead to a blowout. 2. Severe wear: Each tire tread groove has a wear limit indicator, which is approximately 2mm thick. It is recommended to replace the tires when the tread thickness wears to within 4mm of the limit indicator, or about 6mm from the deepest part of the groove. 3. Multiple patches: One or two patches do not affect tire usage, but after more than three patches, it is advisable to replace the tire for safety reasons. When driving at high speeds, the temperature inside the tire rises, and tires with excessive damage, even if well-patched, still increase the risk of danger. 4. Punctures in the sidewall: Punctures in the sidewall are indeed more dangerous than those in the tread. If the damage is located below the tire identifier near the rim edge, the tire must be replaced because the steel wires in this area are very weak and almost impossible to repair.
10
0
Share

What Causes the Anti-Skid Light to Illuminate on the Buick Excelle?

Here are the specific reasons why a car's anti-skid light may illuminate: Improper Operation: Accidentally pressing the ESP off button. Connection Fault: Loose or faulty sensor connectors. Wiring Issues: Short circuits or blown fuses. Software Problems: Signal transmission issues caused by software errors. ABS Pump Failure. Through the ASR electronic control unit, the system calculates and analyzes signals from the wheel speed sensors to determine the wheel slip rate and vehicle speed. The electronic control unit then adjusts the throttle opening and brake pressure to control the wheel slip rate, preventing the vehicle from skidding during driving.
19
1
Share

How to Judge Turning Distance?

There are two methods to judge the distance between the right front corner of the car and obstacles when turning: 1. Except in cities and highways, to judge the distance between the right wheel and the roadside, look diagonally through the midline of the car head. If this midline has reached the roadside line, it means the right wheel is at least 30 centimeters away from the roadside line. Exceeding this range may mean going over the line. 2. To judge the distance from the right side to an obstacle (such as a pedestrian), look out from the right side of the car head. If you can see a very low position, it means you are still far from the obstacle. If you can only see a high position (such as above the knees of a pedestrian), it means you are very close to the obstacle.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.