Where is the OBD interface located on the Haima S5?

What is the free travel of the clutch?

Clutch pedal free travel refers to the reflection of the gap between the inner end of the clutch diaphragm spring and the release bearing on the clutch pedal. For example, the free travel of the clutch pedal in a Santana sedan is 15-25mm. Below are relevant details about clutch free travel: 1. If the pedal has no free travel, meaning the release bearing remains in contact with the inner end of the diaphragm spring when the clutch pedal is released in the engaged state, this will accelerate the wear of the release bearing. 2. If the diaphragm spring is pushed by the release bearing, it will cause the clutch to slip when transmitting engine torque. 3. If the pedal free travel is too large, the distance the release bearing pushes the diaphragm spring forward is reduced, and the distance the pressure plate moves backward is also shortened. This prevents complete release of the pressure plate's force on the driven plate, resulting in incomplete clutch disengagement and making gear shifting difficult.

12

1

Share

What is the passing score for Subject 2 and Subject 3?

Subject 2 requires a minimum passing score of 80, while Subject 3 requires 90. According to Article 35 of the "Decision of the Ministry of Public Security on Amending the Regulations on the Application and Use of Motor Vehicle Driving Licenses," the passing standards for each subject are as follows: 1. Subject 1: The full score is 100, and a score of 90 or above is considered passing. 2. Subject 2: The full score is 100. For large buses, tractors, city buses, medium-sized buses, and large trucks, a score of 90 or above is required to pass. For other vehicle types, a score of 80 or above is sufficient. 3. Subject 3: Both the road driving skills test and the safety and civilized driving knowledge test have a full score of 100 each, and a score of 90 or above in each is required to pass.

5

3

Share

How to Replace the Air Conditioning Filter on Baojun 510

To replace the air conditioning filter on Baojun 510, follow these steps: 1. Open the glove box and release the clips on both sides with your fingers. 2. Lift the glove box upwards to remove the clips. 3. After lowering the glove box, you will see a black cover. Press the clips on both sides to remove the cover and access the air conditioning filter. 4. Take out the old air conditioning filter and replace it with a new one. Here are the functions of the Baojun 510 air conditioning filter: 1. It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. 2. It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture adsorption capabilities.

2

3

Share

Is the Levin a product of FAW Toyota or GAC Toyota?

Levin is a model under GAC Toyota, a product built on the TNGA architecture's GAC platform. Its exterior design inspiration comes from the North American raptor, the bald eagle, inheriting a sharp style that grants it high recognition and creates an instantly captivating visual appeal. The Levin comes in two powertrain versions: the fuel-powered model is equipped with a 1.2T D4T direct-injection turbocharged engine, delivering a maximum torque of 185Nm at 1500 rpm, paired with a simulated 10-speed SCVT continuously variable transmission. The hybrid model features Toyota's THS II hybrid system, equipped with a specially designed 1.8L Atkinson-cycle inline four-cylinder engine for hybrid systems, achieving a combined fuel consumption of just 4.1L per 100 kilometers, matched with an E-CVT electronic continuously variable transmission. GAC Toyota Motor Co., Ltd. was established on September 1, 2004, as a joint venture project equally owned by Guangzhou Automobile Group Co., Ltd. and Toyota Motor Corporation, with a 50:50 investment ratio for manufacturing and operations.

16

5

Share

What Are the Consequences of Forgetting to Engage the Handbrake?

Forgetting to engage the handbrake when parking can easily lead to a rolling accident, which is highly dangerous for driving safety. The handbrake is designed to provide braking when parking on flat or sloped surfaces, preventing the vehicle from moving automatically when unattended and avoiding traffic accidents. Here are some precautions for using the handbrake: 1. When stuck in traffic on a slope, always remember to engage the handbrake. During daily driving, it's best to maintain a certain distance from other vehicles. If the car starts rolling backward, immediately take corrective measures such as stepping on the foot brake and engaging the handbrake. Additionally, during prolonged parking, remain vigilant and always remember to engage the handbrake. This not only allows your foot to rest but also prevents the risk of rolling due to accidentally releasing the foot brake. 2. During high-speed driving, the handbrake should not replace the foot brake. Under normal circumstances, use the foot brake to stop the vehicle gradually. Only in emergencies should you use the handbrake to stop the vehicle forcefully at high speeds, as it can be extremely hazardous. 3. Driving with the handbrake engaged causes significant brake wear. Develop proper driving habits by checking if the handbrake is released before driving. Also, pay attention to the dashboard, which provides the most comprehensive information. Regularly monitoring the dashboard and heeding warning lights can help avoid driving with the handbrake engaged.

13

1

Share

What does the MAX A/C button in a car mean?

The MAX A/C button on a car's air conditioning system refers to the maximum cooling mode, which is the coldest setting available. MAX A/C is a feature-specific button found in certain vehicle models. Pressing this button maximizes the distribution of cooled air through the dashboard vents, making the air conditioning system more efficient for rapid cooling. This function is particularly useful when quick temperature reduction is needed. Below are some precautions for using the air conditioning system: 1. Turn off A/C during startup and rapid acceleration: Since the air conditioning (non-independent type) consumes some of the engine's power, it is advisable to turn off the A/C when starting the vehicle or during rapid acceleration. Once the vehicle is in motion, the A/C can be turned back on. This prevents engine power loss during acceleration and startup while also improving fuel efficiency. 2. Adjust the vent direction: Based on the principle that cold air sinks and hot air rises, drivers should direct the vents upward when using the cooling function and downward when using the heating function. 3. Avoid turning on the A/C immediately after the car has been exposed to sunlight: The interior temperature of a car can become extremely high after prolonged exposure to sunlight. In such cases, it is best to first open the windows for ventilation to allow the hot air to escape before turning on the A/C.

8

1

Share

Where is the OBD interface located on the Haima S5?

What is the free travel of the clutch?

What is the passing score for Subject 2 and Subject 3?

How to Replace the Air Conditioning Filter on Baojun 510

Is the Levin a product of FAW Toyota or GAC Toyota?

What Are the Consequences of Forgetting to Engage the Handbrake?

What does the MAX A/C button in a car mean?

Where is the Lincoln Nautilus produced?

Where is the EcoSport's cabin air filter located?

How to Use Lights When Meeting Another Vehicle at Night?

What causes the Nissan Tiida's one-button start to fail igniting?