Where is the OBD interface located on the Great Wall C50?

1 Answers
MacDominic
07/25/25 1:22pm
The OBD interface of the Great Wall C50 is located above the brake pedal, near the driver's left knee. You can see it by crouching down and looking up along the pedal. The Great Wall C50 is a model under Great Wall Motors, with a wheelbase of 2700mm, which basically meets the standard of a mid-size car (B-segment). In terms of safety and comfort, the Great Wall C50 has undergone six upgrades, making it one of the few domestic sedan models equipped with a turbocharged engine. Taking the 2016 Great Wall C50 1.5T manual comfort model as an example: it is equipped with a 1.5T 133 horsepower L4 turbocharged engine, matched with a 5-speed manual transmission, and has a body length of 4669mm, width of 1775mm, and height of 1455mm.
Was this review help?
1
0
Share
More Forum Discussions

What Causes the Clicking Sound When Turning the Steering Wheel to Full Lock While Reversing?

Causes of the clicking sound when turning the steering wheel to full lock while reversing include: 1. Lack of lubrication in the steering column, resulting in increased friction; 2. Insufficient power steering fluid; 3. Faults in the universal joint, plane bearing, or power steering system; 4. Aging of the rubber bushings on the suspension stabilizer bar links; 5. Poor driving habits, such as excessive braking; 6. Abnormal wear on the brake disc or brake pad surfaces. Steering wheels can be categorized into: single-spoke, dual-spoke, triple-spoke, and quad-spoke designs. Their function is to convert the force applied by the driver on the steering wheel rim into torque, which is then transmitted to the steering shaft to change the vehicle's direction.
3
2
Share

How to Switch Hyundai Drive Mode?

Hyundai Drive Mode can be switched by pressing the Drive Mode button to select the appropriate driving mode. Taking the 2020 Hyundai Santa Fe as an example, its body dimensions are: length 4930mm, width 1910mm, height 1720mm, wheelbase 2865mm, fuel tank capacity 71L, and curb weight 1775kg. The 2020 Hyundai Santa Fe features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 230PS, maximum power of 169kW, and maximum torque of 353Nm, paired with an 8-speed automatic transmission.
8
0
Share

How to Use the D1, D2, D3 Gears in Accord?

The D1, D2, D3 gears in the Accord can be switched by directly pushing the gear lever. Taking the 2019 Honda Inspire as an example, it belongs to the mid-size car category with the following dimensions: length 4910mm, width 1862mm, height 1450mm, wheelbase 2830mm, fuel tank capacity 48L, and curb weight 1574kg. The 2019 Honda Inspire features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146PS, maximum power of 107kW, and maximum torque of 175Nm, paired with an electronic continuously variable transmission.
12
3
Share

What are the reasons for the Roewe i5 engine emission failure?

The cause of the Roewe i5 engine emission system failure is a decrease in the engine's power performance. The impacts of engine emission system failure include: 1. Increased fuel consumption, leading to excessive carbon buildup over time due to poor combustion; 2. Reduced safety during driving and shortened engine lifespan; 3. Sintering and peeling of the three-way catalytic converter carrier, increasing exhaust resistance; 4. Inaccurate fuel injection control by the computer. The solutions for engine emission system failure are: 1. Perform three consecutive starts and shutdowns or temporarily disconnect the negative terminal of the battery, wait for 30 seconds, and then reconnect; 2. Replace with qualified fuel.
4
5
Share

What brand is vteclev engine oil?

vteclev is Honda brand engine oil. The functions of engine oil are: 1. To separate the surfaces of relatively sliding parts, thereby reducing wear; 2. To bring heat back to the oil tank and then dissipate it into the air to help the radiator cool the engine; 3. To circulate carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, flushing away dirt generated on the working surfaces of parts through the flow of the lubricating oil. The characteristics indicating the need for oil change are: 1. Check the oil viscosity - if there's no viscosity, the oil needs to be changed; 2. The oil color turns black; 3. Excessive black particles, metal shavings, or carbon deposits in the oil; 4. The oil smells abnormal. The method to check engine oil is: 1. Park the vehicle on a level road; 2. Pull out the dipstick after the vehicle has been parked for 10 minutes; 3. Hold the dipstick perpendicular to the ground to check the oil level.
20
1
Share

Why does the Mercedes-Benz E300L suddenly brake on its own?

The Mercedes-Benz E300L suddenly brakes on its own due to its collision prevention system. The collision prevention system is an automatic braking function designed to simplify operations by avoiding the use of hand brakes or electronic parking brakes. Taking the 2021 Mercedes-Benz E260L as an example, its body dimensions are: length 5078mm, width 1860mm, height 1484mm, with a wheelbase of 3079mm. The 2021 Mercedes-Benz E260L features a multi-link independent suspension at the front and rear, and is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 184PS, a maximum power of 135kW, and a maximum torque of 280Nm, paired with a 9-speed automatic transmission.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.