Where is the OBD interface located in the Citroen C4?

1 Answers
Susan
07/24/25 6:48pm
The OBD interface of the Citroen C4 is located inside the ashtray in front of the gear lever, and the ashtray needs to be removed for use. Here is an introduction to the Citroen C4: 1. The Citroen C4 is a compact sedan produced by Dongfeng Citroen: the older models were available in both sedan and hatchback versions. 2. In terms of power: the Citroen C4 offers a choice between a 1.6L naturally aspirated engine and a 1.2L turbocharged engine. The 1.6L version delivers a maximum horsepower of 117 hp, a maximum power of 86 kW, a maximum torque of 150 N·m, and a combined fuel consumption of 6.2L/100km as per the MIIT. The 1.2L version delivers a maximum horsepower of 136 hp, a maximum power of 100 kW, a maximum torque of 230 N·m, and a combined fuel consumption of 5.2L/100km as per the MIIT. 3. In terms of transmission: the Citroen C4 offers a choice between a 5-speed manual and a 6-speed automatic transmission. 4. In terms of exterior design: the Citroen C4 has undergone significant changes compared to the older models, featuring a front face with a through-type design, making it more concise and refined overall. The body does not use too many lines, giving it a relatively timeless style. 5. In terms of interior design: the Citroen C4 adopts a more restrained and concise design language, with overall rich configurations.
Was this review help?
3
1
Share
More Forum Discussions

What type of vehicle is the Beijing AA green license plate?

Beijing AA green license plates are issued for pure electric vehicles. Here is more information about new energy vehicles: 1. Introduction: (1) New energy vehicles refer to those powered by unconventional vehicle fuels. (2) New energy vehicles can be divided into four main categories: pure electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, and other new energy electric vehicles. (3) The advantage of new energy vehicles is zero tailpipe emissions. 2. New energy vehicle license plates: (1) Small new energy vehicles have gradient green license plates, while large new energy vehicles have yellow-green dual-color license plates. (2) New energy vehicle license plates have one more digit than traditional vehicle license plates, which helps effectively distinguish them and avoid duplication.
16
0
Share

Is a Car with a Replaced Engine Block Still Worth Buying?

Yes, it is still worth buying. There will be no impact after replacement. Below is relevant information about the engine block: Break-in is required: Replacing the engine block also requires replacing the piston assembly, which does not affect the car but necessitates a new break-in period. The precautions are the same as breaking in a new car. After the break-in, simply replace the engine oil for normal use. Components involved: From top to bottom, the engine consists of the valve cover, cylinder head, cylinder block (engine block), and oil pan. The engine block is the larger cast iron component of the engine. Inside the cylinder block are assembled components such as the crankshaft, connecting rod, bearing shells, piston, piston rings, piston pin, and other parts.
8
3
Share

What will happen if you make a U-turn in a straight lane?

Handling method for making a U-turn in a straight lane: It is considered as driving not in accordance with the prescribed lane, and according to regulations, it will result in 3 penalty points and a fine of up to 200 yuan. Below is the relevant introduction about lane markings: 1. Lane merging: Generally refers to when a vehicle approaches an intersection with multiple lane markings, it should enter the corresponding lane according to the intended direction of travel. 2. Lane changing: Refers to changing lanes when driving on multiple lanes (such as overtaking, encountering obstacles, etc.). Note: Lane merging does not require turning on the turn signal if going straight, but lane changing must be done according to the intended lane position, and the turn signal must be turned on in advance.
7
5
Share

How to Fix Windshield Wipers Hitting the Frame

Solutions for windshield wipers hitting the frame: Remove the wiper arm, adjust it slightly upward, and then secure the wiper arm screw. Below is relevant information about windshield wipers: 1. Components: Windshield wipers consist of an electric motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. 2. Function: The primary purpose of windshield wipers is to clear rain, snow, and dust that obstruct the driver's view on the windshield. 3. Intermittent Flexible Wipers: These allow drivers to adjust the wiping speed according to rainfall intensity and visibility conditions. Unlike standard wipers, they can automatically increase or decrease wiping speed based on vehicle speed.
9
0
Share

How many kilometers should the transmission oil be changed for the X-Trail 2.5?

The transmission oil for the X-Trail should be changed every 40,000 kilometers or 48 months, whichever comes first. After the transmission oil has been used for a certain mileage, its viscosity will become thinner and dirtier, which directly affects the working condition and lifespan of the transmission. The following points should be noted during the replacement: 1. Special equipment for automatic transmissions must be used to completely remove the old ATF oil and other impurities. This is different from changing engine oil, where atmospheric pressure is used to drain the old oil from the lubrication system. However, automatic transmission oil cannot be completely drained using atmospheric pressure, as this method only removes about half of the old oil. The remaining oil will accumulate with sludge and impurities in the valve body, torque converter, and cooling lines, causing blockages in the internal oil passages. 2. When changing the transmission oil, it is essential to use the same type of transmission oil as the original. Manual transmission vehicles can only use manual transmission oil (also called gear oil), while automatic transmission vehicles (including semi-automatic transmissions) must use automatic transmission oil. Additionally, ensure the correct oil specification is selected. 3. Typically, when changing automatic transmission oil, the screw at the bottom of the transmission oil pan is removed to drain the old oil before adding new oil. However, this method only replaces about 30% of the oil, leaving 70% of the old oil still in the transmission. If the oil pan is removed for the oil change, the replacement rate can reach 70%, which is sufficient to maintain the transmission's health. Currently, the better method is dynamic oil replacement, which uses specialized transmission cleaning equipment. During the operation of the transmission, the old oil is thoroughly circulated and drained before adding new transmission oil, achieving a replacement rate of over 90%.
8
4
Share

Is Replacing a Car Roof Considered a Major Accident?

Yes. Generally, there are three main reasons that can cause damage to a vehicle's roof. The details are as follows: Traffic accidents: After a collision occurs, whether it's an active impact or a passive one, the vehicle's roof will inevitably be affected to some extent, leading to torque or dents on the roof, resulting in varying degrees of deformation. Vehicle rollover accidents: It's easy to imagine that after a vehicle rolls over, the most vulnerable part is the roof, which can lead to large-area collapse of the roof, causing severe deformation. Falling objects from height: Objects falling from a height are most likely to damage the vehicle's roof. Therefore, when parking, it's best to avoid parking near buildings to prevent objects from falling and damaging the vehicle's roof.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.