Where is the normal coolant level for the Regal?

3 Answers
DePenelope
07/24/25 8:24pm
The normal coolant level for the Regal is located in the engine compartment. Here is some relevant information about the Buick Regal: 1. Introduction to the Buick Regal: As one of the most successful strategic models of the Buick brand, the Regal has gained widespread popularity among users with its trendy, sporty, and technologically advanced product image and comprehensive technical capabilities. The Buick Regal integrates General Motors' global advanced technologies, inheriting traditional advantages while meeting the ever-increasing demands of consumers in the new era. It delivers renewed driving value with innovative product strengths, achieving further evolution in dynamic styling, driving and riding quality, and technological attributes. 2. Powertrain of the Buick Regal: The new Buick Regal offers two optional drivetrain systems, combining advanced technology with high durability. While balancing performance and fuel economy, it precisely meets the diverse needs of users with different power combinations.
Was this review help?
20
4
Share
LeJessica
08/11/25 11:07am
As a seasoned car enthusiast who frequently tinkers with vehicles, I must emphasize that maintaining the proper coolant level in the Regal is absolutely crucial. Based on my experience with my own Regal, the coolant reservoir is typically located on the right side of the front engine compartment, often marked with a coolant symbol on the cap. The correct fluid level should always be between the two marked lines: Max indicating the maximum level and Min the minimum. However, it's essential to check only when the engine is completely cool—either after overnight parking or allowing at least two hours of cooldown time. When opening the cap, if the level falls below Min, you should top it up with the manufacturer-recommended coolant mixture—never use plain water to avoid corrosion risks. Insufficient coolant can lead to engine overheating and even cylinder damage, which is no trivial matter. I learned this the hard way when neglecting checks caused my engine temperature to spike dangerously, nearly costing me thousands in repairs. A simple monthly inspection routine can prevent major headaches and ensure driving safety.
Was this review help?
3
2
Share
Expand All
EvelynFitz
08/11/25 11:08am
I've been driving a Buick Regal, and the coolant reservoir is quite easy to locate. After the engine cools down, pop the hood and look for a transparent or semi-white plastic tank on either the left or right side—that's where the coolant is stored. The fluid level should be between the Max and Min marks; don't let it overflow or run dry. I was confused the first time I checked, but it became much simpler once I got the hang of it. If the level is below Min, you'll need to add the specified coolant—avoid mixing brands, as it can cause issues. Overfilling can also lead to expansion tank rupture. I recommend taking a quick look whenever you wash the car or refuel—it saves money and gives peace of mind.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

How to adjust the time on Excelle?

To adjust the time on the Excelle, operate on the center console. Detailed steps: 1. Turn on the radio, wait until the LCD screen changes from frequency display to time display, then press and hold the number 4 key (lock key) for more than 4 seconds without releasing; 2. Then press and hold the rewind key to select the hour, pressing once increases the hour by one; 3. Press the fast forward key to select the minutes for adjustment. The Excelle is equipped with GM's new-generation 1.3L Ecotec dual injection engine and features a CVT intelligent continuously variable transmission for the first time. The engine has a maximum power of 79kw and a maximum torque of 133nm. This new drive system is equipped with an intelligent start-stop function.
13
0
Share

Is a probationary sign required during the internship period?

During the internship period, a probationary sign is required, and failure to display it will result in a fine. If a probationary driver does not affix or hang the unified sign on the rear of the vehicle, if the sign cannot be properly recognized, or if the sign does not meet the requirements (such as self-printed signs), it will be considered as not displaying the sign. According to Article 64, Paragraph 3 of Order No. 123: During the internship period, a unified probationary sign must be affixed or hung on the rear of the vehicle when driving. New drivers can obtain the probationary sign at the traffic violation processing windows of the local traffic police brigade or the vehicle management offices (branches) by presenting their driver's license.
14
1
Share

How Many Turns to Lock the Steering Wheel?

For an average family sedan, the steering wheel locks after one and a half turns to either side. Additional Information: 1. Steering Wheel: The steering wheel is the tool drivers use to control the direction of the vehicle. It is connected to the steering shaft via splines, transmitting the driver's turning input to change the vehicle's direction. 2. Precautions: On highways or mountain roads, always grip the steering wheel firmly with both hands to prevent loss of control and accidents. Avoid sudden sharp turns or corrections. For novice drivers, don't overly focus on counting steering wheel turns—prioritize observing road conditions ahead and drive cautiously.
19
0
Share

Where Does the Wiper Root Lead To?

The wiper root leads to the outside of the vehicle. Below are the specific details about the wiper: 1. Function: The wiper is a device used to brush off raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. 2. Power Source: The power source of the wiper comes from the motor, which is the core of the entire wiper system. The wiper motor uses a DC permanent magnet motor, and the wiper motor installed on the front windshield is generally integrated with the worm gear mechanical part. The function of the worm gear mechanism is to reduce speed and increase torque, and its output shaft drives the four-bar linkage, which converts continuous rotational motion into left-right swinging motion through the four-bar linkage.
10
4
Share

What Causes the Abnormal Noise When Turning on the Air Conditioning in a Corolla?

Here are the reasons for the abnormal noise when turning on the air conditioning in a Corolla: 1. Fault phenomenon: When the air conditioning is turned on, abnormal noise comes from the engine area. There are mainly two reasons, which can be divided into two situations based on the different sounds of the abnormal noise: one is the metal friction sound emitted when the compressor electromagnetic clutch engages, and the other is the squeaking sound caused by excessive force on the air conditioning belt. Both of these situations occur only when the air conditioning is turned on and the accelerator is pressed. 2. Diagnostic analysis: When the compressor electromagnetic clutch engages and emits a metal friction sound, the fault is generally due to a lack of lubricating refrigerant oil inside the compressor. When there is insufficient refrigerant oil, the piston inside the compressor does not receive adequate lubrication during operation, resulting in a metal friction sound under the high pressure of the refrigerant. Another situation is a fault with the electromagnetic clutch itself, where the internal bearing is damaged and emits abnormal noise. In this case, the compressor must be replaced. If there is a lack of refrigerant oil, it is necessary to first recover the refrigerant from the air conditioning system, evacuate the system, refill with sufficient refrigerant oil, and then add the refrigerant. Start the car and run the air conditioning for a while to allow the refrigerant oil to circulate fully in the system. If the friction is severe, the compressor also needs to be replaced.
6
0
Share

What are the causes of transmission shift fork damage?

Possible causes include: wear on the positioning groove and positioning pin of the shift shaft, resulting in irregular steps on the surface, or loosening and improper adjustment of the linkage rod leading to shift fork damage. Below are related introductions: 1. Transmission: A device that changes the speed ratio and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. Gear-driven transmissions generally consist of a housing and several gear pairs. 2. Shift fork: The shift fork is a component in the automobile transmission, connected to the shift lever and located at the lower end of the lever. It moves the intermediate shift gear to change the input/output speed ratio. The shift fork is mainly used for clutch gear shifting.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.