Where is the Nissan X-Trail's cabin air filter located?

1 Answers
McCharlotte
07/29/25 9:06am
Nissan X-Trail's cabin air filter is located under the glove compartment on the passenger side, which is not easy to find, and the replacement process requires lying down and can be quite challenging. Here is some relevant information: 1. It is recommended to replace the cabin air filter every 20,000 kilometers or once a year. Its function is to filter out most of the dust from outside the vehicle, making the air blown by the air conditioning system cleaner, which directly affects the air quality inside the car. 2. The steps to replace the Nissan X-Trail's cabin air filter are as follows: (1) First, remove the decorative panel under the glove compartment and take it off. Be careful during the removal process to avoid screws falling into the gaps, which may cause abnormal noises while driving. (2) Then, squat down to find the cabin air filter cover. (3) Take out the old cabin air filter and replace it with a new one. During installation, pay attention to the direction indicated by the arrow on the filter, which represents the direction of airflow, to achieve the best filtration effect. (4) Finally, clean up any debris in the passenger area, turn on the air conditioning at maximum airflow for a test run, and ensure there are no abnormal noises or air leaks.
Was this review help?
7
5
Share
More Forum Discussions

What is the reason for the flashing fault light on the charging pile?

The alternating flashing of the fault light on BYD charging piles is due to poor contact between the charging pile and the charging cable. Taking the BYD Qin as an example, the following are the specific details of the BYD Qin: 1. Body dimensions: The length, width, and height are 4765 mm, 1837 mm, and 1495 mm respectively, with a wheelbase of 2718 mm. 2. Powertrain: Equipped with a 1.5-liter naturally aspirated engine, this engine has a maximum power of 81 kW, reaching maximum power at 6000 rpm, and a maximum torque of 135 Nm, reaching maximum torque at 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 3. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
19
5
Share

Precautions for Driving Through Water: Is Idling Necessary?

Precautions for driving through water require idling. Below is an introduction regarding driving through water: 1. Origin: During the rainy season and typhoon season, road water accumulation or flooding frequently occurs, especially in low-lying areas and underpasses, which are quite common. Therefore, extra caution must be exercised when driving through these areas, otherwise, momentary negligence may cause severe engine damage. 2. Location: The air intake of most vehicle engines is positioned approximately above or at the center of the front bumper. If the water level approaches the bumper area, water can easily be sucked into the engine, leading to damage. Since water is incompressible, when it enters the cylinder, it creates excessive pressure, causing the connecting rod to bend or even break, and potentially rupturing the engine block. 3. Judgment: To determine a safe water depth for the vehicle, it's best to use the wheels as a reference. The midpoint of the wheel's center downward serves as the benchmark. If the water level exceeds this benchmark, do not attempt to drive through the water.
19
4
Share

What are the body dimensions of the 2021 Honda Vezel?

The 2021 Honda Vezel comes in two size variants: 4328mm, 1772mm, 1605mm and 4340mm, 1790mm, 1605mm. Taking the 2020 manual comfort version as an example, it has a wheelbase of 2610mm, equipped with a 1.5L naturally aspirated engine paired with a 6-speed manual transmission, delivering a maximum horsepower of 131PS, maximum power of 96kW, and maximum torque of 155Nm. The 2020 manual comfort version features a 5-door, 5-seat SUV body structure, with a front McPherson independent suspension and a rear torsion beam suspension. Below is an introduction to the 2021 Honda Vezel: 1. Exterior: The chrome trim on the model has been removed from the front of the new car, replaced by a very tight horizontal grille, further enhancing the sporty feel. The two headlight clusters have also been redesigned, with the overall shape becoming more slender, and the daytime running lights adopting a sharper style. From a side view, the new car's body dimensions are noticeably increased, making it appear more elongated. The new model's fastback design style has also become more recognizable, paired with all-black multi-spoke sports wheels, highlighting its sportier appeal. Moreover, the thick camouflage cannot hide the beautifully sculpted lines of the new car. Notably, the hidden rear door handles from the previous model are retained in the new car. 2. Powertrain: In terms of powertrain, it is announced that the new car will continue to be equipped with the 1.5L and 1.5T powertrains. The 1.5L engine delivers a maximum power of 131 horsepower and peak torque of 155Nm, paired with either a 6-speed manual or continuously variable transmission. The 1.5T engine offers a maximum power of 177PS and peak torque of 220Nm, matched with a CVT continuously variable automatic transmission. Additionally, the new car may introduce a hybrid version, possibly equipped with the same 1.5L i-MMD hybrid system as the Lingpai and Enjoy models, further improving driving comfort and fuel economy.
9
2
Share

What does the Hongqi H5 48V mild hybrid system mean?

Hongqi H5 48V mild hybrid system refers to the hybrid power of the car. More introductions about the mild hybrid system are as follows: 1. Introduction: Automobile mild hybrid power refers to the light hybrid vehicle. The automobile mild hybrid power changes the original power output mode of the car. The mild hybrid car generally adopts pure electric power to start, so there is no big vibration and noise when starting the car. The mild hybrid car has a power recovery system. When stepping on the brake, this system will recover the wasted energy and charge its own battery to achieve the effect of energy saving and emission reduction. 2. Classification of hybrid vehicles: Series hybrid electric vehicle (SHEV) is mainly composed of three major power assemblies, including engine, generator and drive motor, which are connected in series to form the power system of HEV. The engine and drive motor of parallel hybrid electric vehicle (PHEV) are both power assemblies. The power of the two major power assemblies can be superimposed and output, or output separately. Hybrid hybrid electric vehicle (PSHEV) is an electric vehicle composed of series and parallel structures, mainly composed of three major power assemblies, including engine, electric generator and drive motor.
1
2
Share

What is the distance for pulling over to the side of the road?

The standard distance for pulling over to the side of the road in Subject 3 of the driving test is 30CM. Here are the precautions for pulling over: 1. Precaution 1: Before the vehicle comes to a complete stop, do not open the door to let passengers in or out. 2. Precaution 2: When temporarily parking on the right side, the driver must not leave the vehicle immediately and should quickly drive away if obstructing traffic. 3. Precaution 3: Do not park at intersections, railway crossings, curves, narrow roads, narrow bridges, steep slopes, tunnels, or within 20 meters of these locations. 4. Precaution 4: Do not park on sections of the road with pedestrian guardrails (hedges), crosswalks, construction zones, or opposite obstacles. 5. Precaution 5: Do not park in front of bus stops, tram stops, emergency stations, gas stations, fire hydrants, or fire stations, or within 30 meters of these locations, except for vehicles using these facilities. 6. Precaution 6: Large buses and trams, except under special circumstances, must not park outside designated stops.
10
1
Share

What does NOA mean in cars?

Tesla NOA is actually a function called Navigate-on-Autopilot, which is part of Tesla's Full Self-Driving upgrade package. It enables the vehicle to automatically enter and exit highway ramps or interchange forks, and overtake slower-moving vehicles. Here are the specific details about NOA: 1. Function: The NOA feature is characterized by its ability to autonomously determine the timing of entering and exiting highways, as well as the timing of overtaking, and to perform automatic lane changes for overtaking without human intervention. It is worth noting that even when activated, this function can only be truly enabled when the vehicle enters a designated closed section of the road, accompanied by audio and visual reminders, and even tactile feedback from the steering wheel vibration during lane changes. 2. Usage: The method of using this function is relatively simple. After setting a navigation point and starting navigation in the vehicle's system, quickly pull the cruise control lever towards you twice to activate the automatic assisted navigation driving function. During use, a single blue line represents the forward travel route, helping the vehicle stay within the driving lane. The gray lines that appear indicate upcoming lane changes in the travel route or suggest lanes that should be changed for smoother driving.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.