Where is the Nissan Livina's cabin air filter located?

2 Answers
JacksonLynn
08/28/25 5:44am
The Livina's cabin air filter is located beneath the dashboard, inside the trim panel in front of the front passenger seat. The Livina is a compact car designed by Nissan, with main competitors being models like the Polo and Fit. Relevant information about automotive cabin air filters is as follows: 1. Introduction: The automotive cabin air filter is a specialized filter designed for air purification within the vehicle cabin. It uses activated carbon composite filter material made from highly efficient adsorbent activated carbon and long-fiber non-woven fabric, featuring a compact structure. 2. Function: It can effectively filter smoke odors, pollen, dust, harmful gases, and various odors. The filter also efficiently filters and adsorbs particulate impurities, serving the purpose of filtering and purifying air.
Was this review help?
5
5
Share
ElianaFitz
09/10/25 4:06am
I've driven the Nissan Livina many times before, and I always change the air conditioning filter myself. It's located right behind the glove compartment on the passenger side. When you open the glove compartment, you'll see clips or small screws on both sides. After loosening them, gently remove the glove compartment, and you'll find a plastic cover panel, usually held by clips. Just give it a slight pull to open it. Take out the old filter and replace it with a new one. The whole process is super simple and doesn't even require professional tools. I recommend changing it every six months, especially when the airflow weakens or there's an odd smell during hot weather. The location is thoughtfully designed for easy DIY, saving you the hassle of going to a repair shop while also allowing you to control the filter quality and ensure fresh air inside the car. After replacing it, turn on the system to test it—the effect is immediate.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What Does Hybrid Car Mean?

Hybrid car refers to a vehicle that has two or more power sources, also known as a composite power vehicle. The types of hybrid vehicles are divided into: 1. Parallel hybrid electric vehicles where the engine is the main power source and the electric motor serves as an auxiliary power source; 2. Series-parallel hybrid vehicles that rely solely on the electric motor for driving at low speeds, with the engine and electric motor working together at higher speeds; 3. Series hybrid vehicles that are driven solely by the electric motor. The components of a hybrid car include: battery, fuel cell, solar battery, and the generator of the internal combustion engine.
13
3
Share

How to Remove the Sonata Water Pump?

Sonata water pump removal method: 1. Remove the power cord of the water pump. Open the rear cover of the water pump to find many power cords inside, all of which need to be removed; 2. Remove the rear cover first, then the front end. Check if there are any screws around, and prepare a screwdriver to remove all the screws; 3. Remove the water pump core inside, and clean the interior with some cleaning tools. The Sonata is a mid-size sedan under Beijing Hyundai, with a body length, width, and height of 4747mm, 1820mm, and 1440mm respectively, and a wheelbase of 2890mm.
20
5
Share

How much longer can National IV emission standard vehicles be driven in Beijing?

As long as they can pass the annual inspection at the local motor vehicle inspection station, National IV emission standard vehicles can continue to be driven in Beijing. Vehicle emission standards refer to regulations on the content of harmful gases emitted from vehicle exhaust, such as CO (carbon monoxide), HC and NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot). China's emission standards are divided into: National I, National II, National III, National IV, National V, and National VI. The National VI emission standard is implemented in two phases: the first phase requires all sold and registered vehicles to comply with the National VI A standard from July 1, 2020; the second phase requires all sold and registered vehicles to comply with the National VI B standard from July 1, 2023.
11
3
Share

How to install the rear seats of the GL8?

The installation method for the GL8 rear seats is as follows: 1. Place the seat on the plastic board, ensuring the horizontal rod under the seat fits into the groove; 2. Push the U-shaped handle at the rear of the seat forward until the horizontal rod under the seat reaches the front end of the groove. The GL8 is an MPV with body dimensions of 5238mm in length, 1878mm in width, 1776mm in height, and a wheelbase of 3088mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 174kW at 5000rpm and a maximum torque of 350Nm.
13
2
Share

What is the difference between LNG and CNG?

LNG and CNG have different production methods. Below are the specific introductions of LNG and CNG: LNG: LNG is the abbreviation for Liquefied Natural Gas. CNG: Compressed Natural Gas (abbreviated as CNG) is natural gas pressurized (over 3,600 pounds per square inch) and stored in containers in a gaseous state. It has the same composition as pipeline natural gas. CNG can be used as vehicle fuel. The relationship between LNG and CNG: LNG can be used to produce CNG. Vehicles that use CNG as fuel are called NGVs (Natural Gas Vehicles). Compared to traditional methods of producing CNG, this process requires less expensive precision equipment and only about 15% of the operating and maintenance costs.
3
5
Share

Under What Circumstances Should Fog Lights Be Used?

Fog lights should be turned on when driving at night without street lights, under poor lighting conditions, or in situations with low visibility such as fog, rain, snow, dust, or hail. The methods to activate them are: 1. Rotate the light control lever located below the left side of the steering wheel; 2. Press the fog light button near the instrument panel. The types and functions of car lights include: 1. Brake lights: To warn pedestrians or vehicles behind; 2. Turn signals: To alert surrounding vehicles and pedestrians; 3. License plate lights: To illuminate the vehicle's license plate at night; 4. High beams: To view distant road conditions; 5. Low beams: To clearly see the road conditions ahead of the vehicle.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.