Where is the new vehicle certificate number located?

2 Answers
LaEverett
07/28/25 3:48pm
Vehicle certificate number is located on the vehicle certificate. Here are detailed instructions: 1. When taking delivery of the vehicle, the owner can request the factory-issued vehicle certificate from the 4S store staff, where the vehicle certificate number can be viewed. 2. However, the vehicle certificate needs to be submitted to and retained by the vehicle management office when the owner registers the new vehicle. Therefore, after registration, the owner receives the motor vehicle registration certificate instead of the vehicle certificate. 3. If the owner wants to check the vehicle certificate number after submitting the vehicle certificate, they can consult the car dealer to inquire at the vehicle management office where the vehicle is registered, and the vehicle certificate number can be found out based on the engine number.
Was this review help?
9
4
Share
LaEva
08/11/25 11:02pm
I've handled quite a few new car procedures before. The certificate number is printed on the vehicle factory certificate provided by the salesperson at the time of purchase, usually an A4-sized document with the number prominently displayed at the top or bottom. Don't rush off when picking up the car—ask the salesperson to point it out and confirm it on the spot, as it's essential for vehicle registration. After buying the car, I recommend scanning and saving it immediately, storing it on your phone or cloud storage, as it's often required for insurance claims or ownership transfers. Also, note that the certificate number must match the VIN and engine number to avoid document forgery—these details are all in the vehicle folder. Remember, the certificate is proof of the car's identity, so keep it safe to avoid the hassle of reapplying if lost.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What happens when a car's throttle position sensor fails?

Here are the symptoms of a damaged throttle position sensor: 1. Poor idle contact: No idle signal, resulting in no idle or unstable idle speed. 2. Poor no-load contact: No full-load signal input, leading to no high speed or difficulty in acceleration. Below is extended information about the causes of throttle position sensor failure: 1. Terminal corrosion: Poor contact, low voltage or no conduction, causing the engine to stall easily or have difficulty starting. 2. Initial position misalignment: Output voltage too high or too low, resulting in unstable idle speed, either too high or too low. 3. Coating failure: Resistance change causes output voltage deviation, leading to jerky starts and poor acceleration. 4. Excessive carbon buildup at the throttle: Incomplete closure affects output voltage and flow values, causing inaccurate air-fuel ratio and unstable idle speed.
11
4
Share

When was the 12th generation Crown released?

The twelfth generation Crown was introduced in 2005. Here is some relevant information about the twelfth generation Crown: 1. Structure: It adopted the same rear-wheel drive technology used in premium sedans like Mercedes-Benz and BMW. The newly developed Toyota FR platform features a newly developed suspension system, with a double-wishbone front suspension and a multi-link rear suspension. 2. Performance: Through continuous innovation in product development, the body's responsiveness was enhanced, improving precision in cornering to world-class levels. This allows drivers to experience a "car that moves with their thoughts," achieving both safety at high speeds and exceptional driving comfort during high-speed cornering.
20
4
Share

What to Do If You Miss the Scheduled Exam After Successfully Booking the Subject 1 Test?

If you have successfully booked the Subject 1 test but did not attend, you need to go to the local Vehicle Management Office to cancel the appointment and provide an explanation for your absence. After successful cancellation, you can log in to the traffic management website with your account and password ten days later to rebook the test online. Here is more relevant information: Notes for the Subject 1 Test: After successful booking, you will receive an SMS notification about five days before the test. On the test day, bring your ID card and invoice to the waiting area. Before the test begins, you will need to submit your ID card and invoice to the examiner for information entry and test number assignment. Make sure to sit in the correct seat and verify your information. After sitting down, adjust the camera to focus on your face, as the system will randomly capture three photos during the test as proof of your participation. If the photos are unclear, the test will not be considered valid. During the test, read each question carefully, especially those related to directional indicators.
17
5
Share

How to Repair Small Dents on a Car?

There are 5 methods to repair small dents on a car: 1. Maintain an appropriate distance between the hair dryer nozzle and the car dent: Point the hair dryer nozzle at the car dent, keeping it not too close to avoid melting the paint due to high temperature, nor too far to ensure effective repair; 2. After using the hair dryer, prepare a cover for the dent: Aluminum foil is recommended due to its excellent heat insulation, which helps maintain the temperature at the dent area; 3. Place dry ice on the aluminum foil: Wear thick gloves to prevent burns and use a clamp to place the dry ice on the foil; 4. If the dent is small, there's no need to move the dry ice back and forth: For larger dents, move the dry ice back and forth to ensure even cooling of the dented area; 5. If a metallic sound is heard after some time, it indicates the car dent is returning to its original shape: Utilizing the principle of thermal expansion and contraction, the significant temperature difference between high and low causes the car metal to deform, thereby restoring the dent.
5
4
Share

What brand does the Patrol belong to?

The Patrol is a model under the Japanese automaker Nissan. The first generation was launched in 1951, positioned as a hardcore off-road vehicle. By 2016, six generations had been released, establishing it as a luxury off-road series renowned for its robust body and reliable performance. Besides the Patrol, Nissan's main models include the Teana, Sylphy, X-Trail, and Qashqai. Key milestones in Nissan's development are as follows: After the 1950s, Nissan gradually made export operations a pillar of its business growth. In 1959, Nissan began its overseas production history through Yulon Motor in Taiwan, China. In July 2021, Nissan established the "Nissan EV36Zero" electric vehicle hub in the UK with a £1 billion investment, located at its Sunderland plant. In August 2021, Nissan announced a partnership with Envision AESC, a Chinese battery supplier under Envision Group. On December 2, 2021, Nissan unveiled a prototype of an autonomous lunar rover developed in collaboration with the Japan Aerospace Exploration Agency (JAXA).
18
3
Share

Where to Install the Car GPS Antenna?

Car GPS antennas are installed inside the trunk, within the bumper, or inside the spare tire. Below is an introduction to the relevant content: 1. Positioning System: GPS is the vehicle's positioning system, which requires the use of satellites for positioning. Therefore, the GPS antenna needs to be placed in an open space with good signal reception to ensure more accurate positioning. 2. Installation Location: The car's trunk is very spacious, offering many potential installation spots. Basically, laying a blanket inside the trunk is sufficient to cover the GPS and prevent it from being discovered. 3. Near the Taillights in the Trunk: Most people wouldn't pay attention to this location, and the satellite signal inside the trunk is relatively unobstructed, ensuring it doesn't affect the positioning performance.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.