Where is the Neutral Position in a Manual Car?

Is It Normal for Car Tire Pressure to Decrease in Cold Weather?

It is normal for tire pressure to decrease in cold weather. Solutions: As temperatures drop, tire pressure values will also decrease. Therefore, it is advisable to appropriately increase tire pressure to avoid excessive movement and abnormal heating of tire components due to over-compression. However, tire pressure should not be too high, as this can reduce tire grip and affect handling comfort. Precautions: Generally, car tire pressure should be checked at least once a month. Pay attention to adjusting tire pressure with each season change. The ideal times for adjustment are November and May. In November, as winter approaches, tire pressure usually decreases and should be slightly adjusted. In May, as the weather starts to warm up, check if the pressure is normal. It is important to note that unless the tire pressure is significantly above the standard range, there is no need to deliberately reduce it. If the tires are not under-inflated, there is no need to adjust the pressure every month.

6

5

Share

How Many Kilograms is 4 Liters of Engine Oil?

4 liters of engine oil is approximately 3.48 kilograms, or about 6.8 pounds. The weight may vary slightly depending on the brand of the engine oil. Engine oil, also known as Engine Oil in English, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Engine Oil Grading: The 'W' in motor oil stands for WINTER. The number before the 'W' indicates the oil's flow performance at low temperatures, with smaller numbers indicating better cold-start performance. The number after the 'W' represents the oil's high-temperature stability, with higher numbers indicating better stability at high temperatures. Winter oil grades include: 0W, 5W, 10W, 15W, 20W, 25W. The 'W' denotes winter, and the smaller the number before 'W', the lower the oil's viscosity at low temperatures, the better its flow performance, and the lower the applicable minimum temperature. API Engine Oil Quality Classification: API engine oils are divided into two categories. One category starts with 'S', indicating oils suitable for gasoline engines, while the other starts with 'C', indicating oils suitable for both gasoline and diesel engines. 'S' category oils: SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, SN. These oils start with 'S', and the letters from A to N indicate progressively higher grades. For example, SN is a higher grade than SM. 'C' category oils: CA, CB, CC, CD, CE, CF. These are general-purpose diesel engine oils, and similar to the 'S' category, the further the letter in the alphabet, the higher the oil's grade. Main Functions of Engine Oil: Lubrication: There is rapid relative sliding between the piston and cylinder, and between the main shaft and bearing. To prevent excessive wear, an oil film must be established between these sliding surfaces. A sufficiently thick oil film separates the sliding surfaces, thereby reducing wear. Auxiliary Cooling: Engine oil has a relatively low specific heat and does not inherently cool the engine. However, during engine operation, heat generated by fuel combustion is carried back to the oil pan by the oil and then dissipated into the air, aiding the radiator in cooling the engine. The actual cooling is performed by water (or antifreeze) outside the engine block. Cleaning: High-quality engine oil can carry carbon deposits, sludge, and worn metal particles back to the oil pan through circulation, cleaning contaminants from the engine parts via the flow of the lubricating oil. Sealing and Leak Prevention: Engine oil forms a seal between the piston rings and piston, reducing gas leakage and preventing the entry of external contaminants. Rust and Corrosion Protection: Lubricating oil adheres to part surfaces, preventing contact with water, air, acidic substances, and harmful gases.

12

1

Share

Is the Recirculation Light On in the Buick Excelle Indicating On or Off?

The recirculation light being on in the Buick Excelle indicates that it is on. Here is some extended information about the Excelle: 1. Body Dimensions: The Buick Excelle has a body length of 4609mm, width of 1798mm, height of 1486mm, and a wheelbase of 2640mm. These dimensions not only enhance the robust and powerful visual effect of the exterior but also expand the interior space and further improve handling and stability. 2. Exterior Design: The new Excelle features a more prominent sense of fashion, with very strong body lines. Combined with a large amount of chrome trim decoration, this impression is even more direct. Both the high and low beam headlights of the Excelle use LED light sources, the tire width is relatively wider, and it is equipped with a practical tire pressure monitoring function.

7

5

Share

How to Loosen a Seat Belt That's Too Tight?

The seat belt has an adjuster at its port; squeezing and pulling it downward will loosen the belt. Here is some relevant information: 1. Seat Belt Adjustment: The tightness of the seat belt can be adjusted. Since everyone's height varies and the position of the seat belt differs from car to car, it's necessary to adjust the seat belt according to one's own body size. There is a 10 cm adjustment range between the high and low points of the seat belt. 2. Function and History: As a general protective device for drivers and passengers during a car collision, the seat belt was invented before the automobile. As early as 1885, seat belts appeared and were used in carriages to prevent passengers from falling off. 'Safety factor' has become a primary concern for drivers and passengers, and it is also one of the most crucial performances of automobiles.

16

3

Share

What does Level 5 autonomous driving mean?

Level 5 autonomous driving refers to full self-driving capability, where no driver intervention is required. The vehicle may not even have traditional driving controls like a steering wheel, accelerator, or brake pedals. Instead, it relies entirely on the vehicle's onboard computer for perception and decision-making to operate the car. This level of automation enables all-weather, all-terrain autonomous driving and can adapt to changes in environmental conditions and geographical locations. The driver can focus on resting or other tasks. In the SAE Levels of Driving Automation published by SAE International (Society of Automotive Engineers), besides Level 5 autonomous driving, there are five other levels. Level 0 represents manual driving, where, according to SAE's definition, the driver is fully responsible for all driving operations, including steering, braking, and acceleration. The vehicle only executes commands, so this level is not considered autonomous driving. Level 1 is driver assistance, where the driver still needs to operate the vehicle, but safety systems like Adaptive Cruise Control (ACC) provide assistance. The driver must keep hands on the steering wheel and eyes on the road. Features such as adaptive cruise control, lane-keeping assist, and automatic braking in luxury brands like Volvo and Mercedes-Benz fall under Level 1 autonomous driving. Level 2 is partial automation, where the vehicle can simultaneously control acceleration, deceleration, and steering. This means adaptive cruise control and lane-keeping systems can work together. Most automakers have already achieved Level 2 autonomous driving technology. Level 3 is conditional automation, where the vehicle can handle acceleration, deceleration, and steering in specific environments without driver input or monitoring of the surroundings. However, the driver must remain attentive and ready to take over if the system encounters a situation it cannot handle. The Audi A8 is the world's first production car capable of Level 3 autonomous driving on public roads. Level 4 is high automation, where the vehicle can operate without any driver intervention but may have limitations, such as speed restrictions or operating in predefined areas. It typically relies on real-time road data to support functions like automated valet parking, platooning, and obstacle avoidance in real-world scenarios. Autonomous driving demand analysis: The essence of autonomous driving technology is to replace human labor in specific scenarios with artificial intelligence, improving efficiency and reducing labor costs. Its underlying logic is similar to industrial robotics—"machines replacing humans"—and will profoundly impact industries like automotive transportation, logistics, and commercial services. Thus, labor cost savings directly reflect the economic value of autonomous driving technology. All vehicles that do not require human operation fall under the autonomous driving category. Based on scenario openness, driving speed (divided by 20 km/h), and cargo type, autonomous driving applications can be categorized into open vs. closed, high-speed vs. low-speed, and passenger vs. freight dimensions. High-speed, open-scenario autonomous driving is the most technically challenging and has the greatest potential but remains far from commercialization and profitability. In contrast, autonomous driving in restricted environments has lower technical barriers and faster commercialization. Fully mature autonomous driving models are rare, with Tesla being one example. Additionally, the market categorizes driving modes into six levels: Level 0 (manual driving), Level 1 (driver assistance), Level 2 (partial automation), Level 3 (conditional automation), Level 4 (high automation), and Level 5 (full automation). Currently, the highest commercially available level is Level 2, and for safety reasons, human intervention is still required.

19

3

Share

Is on-site attendance required for Subject 1?

Learning to drive, Subject 1 is a theoretical knowledge test, and according to regulations, it is mandatory to attend training classes organized by the traffic police department. The following is relevant information about the Subject 1 theoretical knowledge test: 1. Professionals from the traffic police department conduct the classes, which helps in solidifying the knowledge. This way, when encountering situations while driving in the future, you will know how to handle them. You can also ask questions if you don't understand, which is beneficial for better passing the exam; 2. Attending training classes at driving schools also provides some assistance in passing the exam; 3. Self-study at home is also a good method. If you lack confidence, you can do more practice questions at home; 4. In summary, if regulations require attending training classes at the traffic police department, then it's best to study seriously. If there are no such local regulations, attending training classes at driving schools is preferable. Although self-study at home can also help pass the exam, the knowledge may not be deeply ingrained, and you might feel at a loss when encountering situations while driving in the future.

3

Share

Where is the Neutral Position in a Manual Car?

Is It Normal for Car Tire Pressure to Decrease in Cold Weather?

How Many Kilograms is 4 Liters of Engine Oil?

Is the Recirculation Light On in the Buick Excelle Indicating On or Off?

How to Loosen a Seat Belt That's Too Tight?

What does Level 5 autonomous driving mean?

Is on-site attendance required for Subject 1?

What is the reason for the car not starting and the dashboard flashing?

How many kilometers can one bar of fuel run?

Can Tar Remover Be Used to Clean Windshields?

Is driving at 56 in a 50 speed limit considered speeding?