···
Log in / Register

Where is the nameplate located on the Audi A6?

4 Answers
DelJayla
07/29/25 8:26pm

The nameplate of the Audi A6 is located below the engine water channel on the left side of the engine. Pull out the sealing strip and lift the water channel cover to see it. Taking the 2021 Audi A6 as an example: 1. Body dimensions: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm. 2. Power: It is equipped with a 2.0L turbocharged engine with a maximum horsepower of 190ps.

Was this review help?
12
1
Share
JasonDella
08/14/25 5:13pm

The location of the Audi A6's nameplate—I've helped friends locate it a few times—is usually on the lower left corner of the windshield's exterior. Just bend down and look from outside the car, and you'll spot that metal plate. If your line of sight isn't aligned, check the sticker label on the driver's side door frame, which also displays the vehicle identification number (VIN). Why do so many people get confused about this? It's crucial when buying a used car because a relocated plate might indicate modifications or past accidents, so carefully verify matching documentation. For clarity, the position is standardized to avoid confusion—I’d recommend snapping a photo of the VIN with your phone for backup. Occasionally, there’s a secondary nameplate under the hood, but the primary one is always on the windshield. Don’t overlook it during routine registration.

Was this review help?
15
2
Share
Expand All
MacJuniper
10/16/25 4:28am

My own Audi A6 has been driven for several years, and the VIN plate is clearly visible on the lower left corner of the exterior of the front windshield. You can also find it on the door frame sticker when opening the door. I remember the mechanic pointed directly there during my first repair, saying the VIN is used for all procedures like insurance or service records. The actual operation is simple: after parking, squat down to align your line of sight with the label to avoid distortion. Wrong position? That might indicate vehicle history issues, especially verify before transactions to avoid disputes. Additionally, a backup VIN plate in the engine bay holds the same info but isn't the preferred option—ensuring the original location's integrity aids daily maintenance.

Was this review help?
19
3
Share
Expand All
OAlexa
11/29/25 5:16am

Finding the Audi A6 nameplate location is not difficult. On most models, it is visibly located on the lower left side of the windshield exterior. When I purchased a used car, I relied on it to verify the vehicle's authenticity. During inspection, ensure the label is securely attached without looseness, and matches the owner's manual to avoid potential issues such as accident detection. Misplacement of the nameplate may indicate potential risks.

Was this review help?
8
1
Share
Expand All
More Forum Discussions

Is the VIN on the vehicle's license?

The vehicle's license does not display the VIN (Vehicle Identification Number). The VIN can be found in the following locations: 1. Left side of the dashboard; 2. Lower left side of the windshield; 3. On the vehicle's nameplate; 4. Upper body near the right front shock absorber; 5. In the trunk area; 6. On the door hinge pillar, door lock pillar, or one of the door edges connected to the lock pillar. The VIN is a 17-character code that identifies the vehicle's manufacturer, year, model, body type, engine code, and assembly location. Its purposes include: 1. Verifying vehicle identity; 2. Traffic violation inquiries; 3. Checking vehicle batches; 4. Precise parts identification.
15
5
Share

What car brand has a T-shaped logo?

A T-shaped logo represents Tesla vehicles, which include models such as Tesla Model Y, Tesla Model 3, Tesla Model YX, Tesla Model YS, and Tesla Model 3 Import. Taking the 2021 Tesla Model YX as an example, it belongs to the mid-to-large-sized car category with body dimensions of 4979mm in length, 1964mm in width, and 1445mm in height, with a wheelbase of 2960mm. The 2021 Tesla Model YX is equipped with a permanent magnet motor, delivering a maximum horsepower of 538ps, a maximum power of 395kw, and a maximum torque of 755nm, paired with a single-speed fixed gear ratio transmission.
20
3
Share

What Causes Car Idle Shaking?

Car idle shaking is caused by: 1. Severe engine carbon buildup; 2. Dirty throttle body or excessive injector carbon deposits; 3. Faulty spark plugs, high-voltage wires, or ignition coils leading to poor ignition system performance; 4. Unstable fuel pressure, insufficient fuel pump supply pressure, or incorrect intake pressure sensor readings; 5. Fuel line blockage causing insufficient fuel supply; 6. Aging engine components. Solutions for car idle shaking: 1. Clean engine and idle motor carbon deposits; 2. Clean fuel lines; 3. Replace spark plugs, high-voltage wires, and ignition coils; 4. Clean air filter and throttle body; 5. Replace aging engine components.
15
4
Share

Which company owns Neta Auto?

Neta Auto is a brand under Hozon New Energy, with models including Neta NO1, Neta U, Neta V, Neta ETAKE, Neta Eureka 02, etc. Taking Neta U as an example, it belongs to the compact SUV category, with body dimensions of: length 4530mm, width 1860mm, height 1628mm, wheelbase 2770mm, front track 1398mm, and rear track 1373mm. The Neta U is equipped with a permanent magnet DC motor, delivering a maximum horsepower of 164ps, maximum power of 120kw, maximum torque of 210nm, and is paired with a 1-speed fixed gear ratio transmission.
17
3
Share

Do You Need to Press the Brake When Shifting Gears in an Automatic Transmission?

Shifting gears in an automatic transmission does not require pressing the brake. However, there are situations in an automatic transmission car where you need to press the brake: 1. When shifting from P (Park) to other gears, you need to press the brake; 2. When shifting from N (Neutral) to D (Drive) or R (Reverse), you need to press the brake. The method to start an automatic transmission car: 1. Turn the ignition key to the second position (power mode), and the car's computer system will begin self-check; 2. Press the foot brake and shift the gear from P to N; 3. Release the foot brake and turn the ignition key to the start position. An automatic transmission does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The gear positions in an automatic transmission car, from top to bottom, are: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
2
3
Share

How to Adjust the Headlight Height of the Honda Vezel?

Honda Vezel's headlight height adjustment method is: 1. Locate the headlight adjuster in the middle of the door; 2. Rotate the knob - the higher the roller number, the lower the angle. Taking the 2020 Honda Vezel as an example, it belongs to the compact SUV category with body dimensions of: length 4328mm, width 1772mm, height 1605mm, wheelbase 2610mm, fuel tank capacity 50L, luggage compartment volume 437L, and curb weight 1227kg. The 2020 Honda Vezel is equipped with a 1.5L naturally aspirated engine delivering maximum horsepower of 131PS, maximum power of 96kW, maximum torque of 155Nm, paired with a 6-speed manual transmission.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.