Where is the Mondeo's Cabin Air Filter Located?

3 Answers
DiEmma
07/29/25 2:51pm
The Mondeo's cabin air filter is located inside the glove compartment on the passenger side. The functions of the cabin air filter are: 1. To filter the air entering the cabin from outside, improving air cleanliness; 2. To filter impurities in the air, including tiny particles, pollen, bacteria, industrial exhaust, and dust; 3. To prevent these substances from entering and damaging the air conditioning system. Taking the 2020 Mondeo Trend model as an example, its body dimensions are: 4873mm in length, 1852mm in width, and 1470mm in height, with a wheelbase of 2850mm and a fuel tank capacity of 62.5 liters. The 2020 Mondeo Trend model features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 182PS, a maximum power of 134kW, and a maximum torque of 243Nm.
Was this review help?
19
4
Share
HaileyLee
08/13/25 7:23am
Speaking of the location of the Mondeo's cabin air filter, I've changed it several times. It's located under the dashboard on the passenger side. To be more specific, you need to open the glove box first, where there's a small cover or clip. Pry it open, and you'll see a square box containing the filter. When I did it myself, I used a flat-head screwdriver to gently pry it open, being careful not to use too much force to avoid breaking the clips. Changing the filter ensures clean air inside the car, especially since I live in the city with daily traffic jams where dust easily accumulates, affecting airflow and health. It's recommended to check it every six months or 10,000 kilometers. Buying a filter online costs just a few dozen bucks, and doing it yourself saves a lot of unnecessary expenses. The operation is simple, but be careful not to damage the plastic parts. After changing it, driving feels much fresher. The filter is hidden deep inside mainly to prevent debris from falling in—the design is reasonable but a bit concealed.
Was this review help?
7
2
Share
Expand All
CarterMarie
10/11/25 5:01am
The Mondeo's cabin air filter is tucked away quite deep, located behind the glove compartment in front of the passenger seat. As I often drive with my kids, I replace it whenever the airflow weakens or odors appear. Specifically, you need to open the glove box and gently push open a small inner cover to access the filter housing. Replacement is simple when done during quiet moments – just remove the old filter and install the new one. A dirty filter impacts health, especially during pollen season when elderly family members are prone to allergies, so I check it frequently. Changing it every six months maintains optimal performance, keeping cabin air fresh and non-stuffy. DIY replacement with affordable activated carbon filters bought online saves money and avoids dealership markups. The passenger-side placement is thoughtfully designed to prevent accidental contact, ensuring safe driving. Regular maintenance extends AC system lifespan for worry-free operation.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

What is the correct method to start an automatic transmission car?

Correct method to start an automatic transmission car: 1. After sitting in the driver's seat, press the start button directly; 2. Press the brake pedal and press the start button to ignite and start the engine; 3. Release the foot brake, and you may choose to warm up the car while stationary; 4. Press the brake pedal again and shift to D (Drive) gear; 5. Release the handbrake and slowly release the foot brake to start moving; 6. Apply the accelerator smoothly according to road conditions for safe driving. An automatic transmission car does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Generally, an automatic transmission has six gear positions: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). The automatic transmission uses a planetary gear mechanism to shift gears automatically according to the degree of accelerator pedal pressure and changes in vehicle speed.
14
3
Share

How to Press the Clutch When Shifting Gears?

To press the clutch when shifting gears, use the ball of your left foot with the heel as the pivot point. First, press the clutch pedal all the way down, then engage the corresponding gear while lightly pressing the accelerator. Simultaneously, quickly lift the clutch to the semi-engaged position. Once you feel the clutch engage, you can fully release it. The clutch is located inside the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft of the transmission. Its function is to allow the driver to properly operate it, enabling the indirect engagement of the clutch's front and rear parts for smooth starting.
3
1
Share

How to Deal with Spark Plugs Soaked in Engine Oil?

The method to deal with spark plugs soaked in engine oil is: use paper to wipe off the oil on the spark plug, gently sand the electrodes a few times with fine sandpaper, or slightly burn the electrodes of the spark plug on the flame of a gas stove or alcohol lamp. The function of a car's spark plug is to discharge the pulsed high-voltage electricity generated by the high-voltage wire, breaking down the air between the two electrodes of the spark plug to ignite the gas in the cylinder. Methods for maintaining and servicing car spark plugs: 1. Clean the dust and impurities around the spark plug, usually by using compressed air or a fine soft tube to blow them away; 2. When removing the spark plug, ensure the engine is in a cold state and never disassemble or install the spark plug while the car engine is running; 3. After removing the spark plug, protect the installation port to prevent impurities or dust from entering the cylinder; 4. When removing the spark plug, use the correct tools, ensure the wrench fits properly, and operate it straight and correctly to avoid damaging the insulating ceramic body.
16
5
Share

What gear should be engaged when parking on a downhill slope?

When parking on a downhill slope, engage the reverse gear before turning off the engine to prevent the car from rolling forward. For parking on level ground, first shift to neutral, apply the handbrake, and then turn off the engine. Engaging a gear utilizes engine braking, where the wheels are connected to the engine crankshaft through gears, so wheel rotation will inevitably drive the engine. The reverse gear, fully known as the reverse driving gear, is one of the three standard gears in a car. It is marked as "R" on the gear console and is designed to allow the vehicle to move backward, serving as a special driving gear. Precautions for reversing on a downhill slope include: 1. Ensure the vehicle is completely stopped before engaging reverse gear; 2. Press the clutch pedal all the way down when shifting to reverse; 3. Maintain slow speed during reversing and avoid pressing the accelerator.
5
1
Share

How to Remove Asphalt Stuck on Tires?

The methods to remove asphalt stuck on tires are: 1. Spray a dedicated asphalt cleaner on the tire, and after the asphalt softens, use a small shovel to remove it, or repeatedly wipe it with a cloth; 2. Use boiling water by pouring it over the asphalt and then scrubbing repeatedly with a brush; 3. Wash the tire with soapy water and scrub repeatedly with a brush; 4. If the asphalt has been compacted over time and adheres to the tread patterns, it needs to be handled at an auto repair shop. The methods for maintaining tires include checking the tire pressure, which can be judged based on the standards in the car maintenance manual, and promptly removing any stones or foreign objects in the tires.
10
1
Share

Which One is the Clutch Pedal?

The clutch pedal is the first stepping point from left to right in the driver's cabin. It serves as the control device for the clutch assembly in manual transmission vehicles. Its primary function is to engage and disengage the clutch between the engine and the transmission through proper operation by the driver. The clutch consists of friction plates, spring plates, a pressure plate, and a power output shaft. When starting the vehicle, the correct operation method for the clutch is to press down the pedal, engage the gear, then lift the clutch pedal until the friction plates begin to make contact. At this point, the foot should pause briefly while simultaneously applying throttle. Once the clutch plates are fully engaged, the clutch pedal can be completely released.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.