Where is the mobile phone charging port located in the Corolla Hybrid?

What are the length, width, and height of the Bluebird?

The length, width, and height of the Bluebird are 4683mm, 1780mm, and 1465mm respectively, with a wheelbase of 2700mm. The Bluebird is a sedan series launched by Nissan, positioned as a compact car. The entire Bluebird series is equipped with a 1.6-liter naturally aspirated engine codenamed HR16, which has a maximum power output of 93kW and a maximum torque of 168Nm. In terms of exterior design, the Bluebird appears more imposing after the facelift, especially the front section, which subtly hints at the Teana's boldness, making it quite striking. The Bluebird's headlights feature a 'boomerang' design, exuding a strong sense of dominance, while the smooth lines running through the entire side profile enhance its aesthetic appeal.

20

2

Share

What to Do When a Volkswagen Lavida Suddenly Fails to Start?

If a Volkswagen Lavida suddenly fails to start, you can try restarting the vehicle or take it to a repair shop. Below is an introduction to the Lavida: 1. Overview: The Lavida (LAVIDA) is Shanghai Volkswagen's first independently developed A-segment car, launched in June 2008, and is an important model in Volkswagen's global product strategy. 2. Interior: Echoing the strong, dynamic, personalized, and refined characteristics of its exterior, the Lavida's interior core design language embodies individuality. 3. Features: The Lavida maintains the excellent quality of German design while incorporating many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. The Lavida injects a sense of luxury and grandeur into the A-segment car market through its design language, reshaping consumers' traditional impressions of this segment.

8

4

Share

What to Do When the Volkswagen Sagitar Transmission Overheating Warning Appears?

When the Volkswagen Sagitar transmission overheating warning appears, you should immediately slow down and drive at a reduced speed. Below is an introduction to the Sagitar: 1. Introduction: The Sagitar is a joint venture A+ class sedan brand under FAW-Volkswagen. It was introduced to the Chinese market on April 9, 2006, and its predecessor was the fifth-generation Volkswagen Jetta, positioned as a 'German high-performance sedan.' 2. Exterior: The most eye-catching feature at the rear of the car is the two taillights. The Sagitar series uses higher-cost but longer-lasting LED taillights, which offer stronger light penetration and are more noticeable, providing better warning effects at night. 3. Naming: The name 'Sagitar' follows a naming convention similar to Volkswagen's top luxury product, the Phaeton. Its Latin name, Sagitar, is derived from the Greek mythology 'Sagittarius.'

16

2

Share

What is the measurement method for the crankshaft position sensor?

The measurement methods for the crankshaft position sensor are: 1. For magnetic-electric types, a resistance meter can be used to measure the resistance, with values typically ranging from several hundred to over a thousand ohms; 2. The engine can also be started to measure its voltage, which should increase as the engine speed rises. The function of the crankshaft position sensor is to determine the position of the crankshaft, specifically the crankshaft's angle and the engine speed. It usually works in conjunction with the camshaft position sensor to determine the basic ignition timing. The crankshaft position sensor is typically installed at the front or rear of the crankshaft near the flywheel or in the middle of the crankshaft, making it one of the most important sensors in the control system.

11

2

Share

How Many Class Hours Are Required for Subject Two?

Subject Two requires a total of 24 class hours, including 2 hours of theoretical instruction and 22 hours of practical training. Below are the key points to note for the Subject Two test: Reverse Parking: The main deductions in reverse parking include driving over the line, failing to enter the parking space, exceeding the time limit, and not following the designated route. After the new regulations, reverse parking now has a time limit of 210 seconds; exceeding this time results in a failed test. During the test, you must first reverse into the right parking space, then the left one. Not following this sequence will result in a failed test. Pay attention to maintaining a 30cm margin from the side. Parallel Parking: The main deductions in parallel parking involve the turn signal, maintaining a 30cm margin, and driving over the line. When entering the test area, steer right in advance and align the highest point of the windshield wiper with the roadside line to adjust the 30cm margin. During the reverse, remember the first right full lock, straightening, left full lock, parking in the space, and turning on the left turn signal. When exiting, observe the rearview mirror to prevent the wheels from driving over the line on either side. 90-Degree Turn: The main deductions in the 90-degree turn involve the turn signal and driving over the line. After entering the test area, turn on the turn signal and turn it off after the voice prompt. Incorrect operation of the turn signal will result in a 10-point deduction. After entering the 90-degree turn, adjust the vehicle to maintain a 30cm margin from the side line, similar to parallel parking. When executing the full lock, slightly release the clutch to prevent stalling or stopping midway. Straighten the vehicle only after the rear wheels exit the turn to prevent

14

5

Share

What are the black and yellow road signs on the road?

The yellow and black curb markings are road construction safety signs in traffic signs, also known as road barrier signs. One function of the yellow and black curb markings is to warn and remind. Generally, solvent-based paint is used, which is air-drying. The yellow and black effect is achieved through a "color overlay" method—first spraying the main color, such as yellow, then covering it with a template or other regular striped stencil before spraying black. Below is an introduction to the basic meanings of traffic sign colors under normal circumstances: 1. Red: Indicates prohibition, stop, or danger, used for the borders, background, or slashes of prohibition signs, as well as for cross symbols, slash symbols, and the background of warning linear guide signs. 2. Yellow or fluorescent yellow: Indicates a warning, used for the background of warning signs. 3. Blue: Indicates instructions or compliance, used for the background of directional signs; indicates driving information such as place names, routes, or directions, used for the background of general road guide signs. 4. Green: Indicates driving information such as place names, routes, or directions, used for the background of highway and urban expressway guide signs.

3

1

Share

Where is the mobile phone charging port located in the Corolla Hybrid?

What are the length, width, and height of the Bluebird?

What to Do When a Volkswagen Lavida Suddenly Fails to Start?

What to Do When the Volkswagen Sagitar Transmission Overheating Warning Appears?

What is the measurement method for the crankshaft position sensor?

How Many Class Hours Are Required for Subject Two?

What are the black and yellow road signs on the road?

Can a Car's Odometer Be Adjusted?

What are the differences between 5-seater and 7-seater vehicle annual inspections?

Is Car Coating Useful?

Can a spare tire be installed on the front wheel?