Where is the mirror folding switch for the Changan CS75?

1 Answers
LukeAnn
07/29/25 1:23pm
The mirror folding switch for the Changan CS75 is located next to the mirror adjustment knob on the left side of the driver's seat, marked with a mirror and curved arrow symbol. The Changan CS75 is a compact SUV with dimensions of 4650mm in length, 1850mm in width, and 1715mm in height, with a wheelbase of 2700mm. It has a fuel tank capacity of 58 liters and a curb weight of 1600kg. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 178PS, a maximum power of 131kW, and a maximum torque of 265Nm, paired with a 6-speed manual transmission.
Was this review help?
16
2
Share
More Forum Discussions

Which gear should be used in Subject 2 of the driving test?

Subject 2 of the driving test consists of reverse parking and platform exercises. During the reverse parking test, you'll need to switch between 1st gear and reverse gear. Reverse parking and platform: Subject 2 is divided into reverse parking and platform exercises. For reverse parking, you switch between 1st gear and reverse gear. The platform exercises include parallel parking, which also requires switching between 1st gear and reverse gear. All other exercises are performed in 1st gear only. Not recommended to use 2nd or 3rd gear: It's safer to stick with 1st gear. Using 2nd or 3rd gear is not recommended because test vehicles for Subject 2 usually don't have throttle control. Without sufficient speed, shifting into 2nd or even 3rd gear may cause the engine to stall, resulting in an immediate failure. Higher speeds also significantly increase the risk of crossing lines. Gear positions: Push forward for 1st, 3rd, and 5th gears; pull backward for 2nd, 4th, and reverse gears. Practice gear shifting until it becomes second nature. Key points for gear shifting: Shift up one gear at a time (no skipping), but you can skip gears when downshifting. Always match gear to speed. Accelerate before upshifting, decelerate before downshifting. Use engine RPM (around 1800 rpm is ideal for upshifting) and vehicle speed as references. Shifting below 1500 rpm causes lugging, while shifting above 2000 rpm causes jerking - both can damage the transmission.
3
5
Share

Can You Step on the Accelerator During the Slope Start in Driving License Subject 2?

Subject 2 slope start allows stepping on the accelerator. Relevant information is introduced as follows: 1. Subject 2 starting methods: There are four methods for the slope start in Subject 2, namely the handbrake method, semi-clutch method, one-foot dual-use method, and direct start method. 2. Subject 2 assessment: Subject 2 is part of the motor vehicle driving license assessment, with the assessment content being field driving skills, including reverse parking, parallel parking, slope fixed-point parking and start, right-angle turns, and curve driving, etc. Under normal circumstances, the second examination for the subject does not require stepping on the accelerator, and the slope start does not require the handbrake. This is mainly because the vehicle speed in Subject 2 is very high, and even after stopping on the slope, the idle speed is sufficient to support the vehicle smoothly going uphill.
7
5
Share

How to Determine if a Used Car Has Been in an Accident

There are primarily three methods to determine if a used car has been in an accident. Below is a detailed introduction to these three methods: 1. Hood screws: Under normal circumstances, whether there is an issue with the vehicle's engine or other components in the engine compartment, the hood does not need to be removed. If there are signs that the hood has been removed, it either indicates the car has been in an accident or the engine has been replaced. 2. Door screws: Under normal conditions, doors do not need to be removed. If there are signs of door removal, it may indicate that the door has been replaced. Cars with doors that have been removed are not recommended for purchase. 3. Radiator frame screws: Generally, radiators do not malfunction. If the radiator shows signs of replacement, it may suggest the car was involved in an accident that caused radiator damage. When there are signs of loosening screws on the radiator, there is a high probability that the car has been in a significant accident.
20
2
Share

Is the HuTong Card Nationwide Applicable?

Currently, the HuTong Card is applicable nationwide except for Hainan, Tibet, Hong Kong, Macau, and Taiwan. Here is a detailed introduction about the HuTong Card: 1. Overview: The HuTong Card is a dedicated IC card for Shanghai's highway electronic toll collection (ETC) system. It is a non-cash payment IC card issued by Shanghai Public Transportation Card Co., Ltd., authorized for use in the nationwide ETC network. 2. Categories: The HuTong Card is divided into three types: stored-value card, Class A debit card, and Class B debit card. The stored-value card is a designated non-cash payment card for nationwide highway toll collection in Shanghai. The Class A debit card operates on a post-use settlement basis, requiring customers to set up a designated bank account for deduction before applying for the card. 3. Usage Scope: The HuTong Card must be used in conjunction with an electronic tag. It can be used on automatic or manual toll lanes of nationwide highway networks, except for Hainan, Tibet, Hong Kong, Macau, and Taiwan.
13
2
Share

What to Do When a Manual Transmission Gets Stuck in Gear?

If the car's gear gets stuck while driving, you should first slow down, then press the clutch pedal and pull over to the side of the road to turn off the engine. Then, check whether the transmission, clutch, or other components have malfunctioned. If necessary, you can call for a tow truck to take the car to a repair shop for inspection. Here are the reasons why a gear may get stuck: 1. Principle: The principle of a manual transmission is very simple. There is a synchronizer inside the manual transmission, and there is a shift fork under the gear lever, which is connected to the synchronizer. When shifting gears, the synchronizer is used to select the gear. The shift fork controls the synchronizer, and the gear lever controls the shift fork. If there is a problem with the shift fork or synchronizer, it may cause the gear to get stuck. 2. During gear shifting: When shifting gears, you must ensure that the clutch is fully depressed; otherwise, the gear cannot be shifted. If there is a problem with the clutch pedal, even if the clutch pedal is fully depressed but the clutch is not completely disengaged, it may also cause the gear to get stuck.
6
5
Share

Where is the handbrake located in the older Camry models?

Toyota Camry has two types of handbrakes, as described below:1. Foot-operated handbrake: The handbrake pedal is located to the left of the brake pedal; stepping on it engages the handbrake.2. Electronic handbrake: Located next to the gear shift lever with a 'P' icon; pulling it upwards activates the handbrake. Here is more information about handbrakes:1. Mechanical handbrake: Typically found on the left side of the gear lever. Lifting the handbrake engages the brake, and to release it, you need to lift it slightly upwards first, then press the metal part at the head of the handle to release the handbrake before driving.2. Foot-operated handbrake: The vehicle is braked by stepping on the brake with the left foot. To release it, step on the brake again and lift your foot.3. Electronic handbrake: Usually located behind the gear lever. When the vehicle is stationary, lift it upwards with your finger to engage. To release it when starting, press the brake pedal and then press the electronic handbrake button.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.